Dante-enabled Product Catalog

Product model: MTL315-30a Product type： 15 "three-way line array active speaker MHF init： 4 "coaxial mid high frequency unit LF init： 15 "bass unit Frequency response: 40Hz-18.5kHz Rated power： LF: 600W， MHF: 150W Sensitivity： LF: 102dB， MHF: 110dB Maximum SPL： LF: 136dB(peak)， MHF: 140dB(peak) Radiation angle： 100° ×30°，non adjustable Rated impedance： LF: 8Ω ， MHF: 8Ω Dimensions (W x H x D): 760×471×575 (W×H×D) Module parameters Module model: NX603LCD Dante module Amplifier power: HF: 300W, LF: 1000W/8 Ω (Class D) Input link: 2 balanced XLR inputs or 2 AES inputs, one set of Dante signal input and output DSP control: RS485、USB、DANTE

Product model: MTL315-10a Product type： 15 "three-way line array active speaker MHF init： 4 "coaxial mid high frequency unit LF init： 15 "bass unit Frequency response: 40Hz-18kHz Rated power： LF: 600W， MHF: 150W Sensitivity： LF: 102dB， MHF: 110dB Maximum SPL： LF: 136dB(peak)， MHF: 142dB(peak) Radiation angle： 100° ×10°，adjustable Rated impedance： LF: 8Ω ， HF: 8Ω Dimensions (W x H x D): 760×388×595 (W×H×D) Module parameters Module model: NX603LCD Dante module Amplifier power: HF: 300W, LF: 1000W/8 Ω (Class D) Input link: 2 balanced XLR inputs or 2 AES inputs, one set of Dante signal input and output DSP control: RS485、USB、DANTE

technical parameter Product model: MT-SUBa Product type： Ultra low frequency line array active speaker LF init： 18"bass unit Frequency response: 30Hz-200Hz Rated power： 600W Sensitivity： 102dB Maximum SPL： 136dB(peak) Rated impedance： 8Ω Dimensions (W x H x D): 760×530×700 (W×H×D) Module parameters Module model: NX603LCD Dante module Amplifier power: 1500W (Class D) 8Ω Input link: 2 balanced XLR inputs or 2 AES inputs, one set of Dante signal input and output DSP control: RS485、USB、DANTE

Advantages:

● High power density and light body weight, not only can meet the needs of large sound amplifying system, but also easy to move and install;

● Powerful DSP function, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

● Accurate and intuitive status indicator and LCD function display, working status;

● Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

● Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

● Accurate and sensitive temperature detection protection, to ensure that the machine during heating work in a safe range.

Technical parameters：

Product Model: Q60i

Product type: Two channel DSP digital power amplifier

8 Ω power: 1500W X2

4 Ω power: 2500W X2

Analog maximum input： 22dBu

AES maximum input： 0dBS

Frequency response： 20-20KHz +/- 1dB

THD+N： <1%

Damping coefficient： 200

Signal to noise ratio： 102

Working voltage： 180V-240V

Technical parameters：

Speaker model: CA-404DA

Speaker type: Active Speaker

Unit composition: 4×4" Full frequency unit

Frequency response: 100Hz-17kHz （-10dB）

Sensitivity: 94dB

Rated impedance: 8Ω

Sound pressure level: 124dB（peak）

Rated power: 120W

Horizontal coverage Angle: 100°x30°-40°，Electronic control

Speaker model: CX115P

Speaker type: 15”Active coaxial loudspeaker

Unit configuration: LF：15" unit 2.5"(65mm）Voice coil

HF：1.7"（44mm）Voice coil driver

Frequency response: 65Hz-19kHz(-10dB)

Rated power: LF：350W， HF：50W

Sensitivity: LF：98dB， HF：109dB

Sound pressure level： 131dB (peak)

Radiation Angle: 60°×60°

Crossover point: DSP control

Size (mm) : 632×423×392 (W×H×D)

Module amplifier power: HF：150W，LF：500W (Class D)

Module input link: 1 balanced XLR input / 1 set of Dante signal input and output / 1 set of LINK output

Module DSP control: RS485、USB or Dante

Advantages:

● High power density and light body weight, not only can meet the needs of large sound amplifying system, but also easy to move and install;

● Powerful DSP function, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

● Accurate and intuitive status indicator and LCD function display, working status;

● Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

● Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

● Accurate and sensitive temperature detection protection, to ensure that the machine during heating work in a safe range.

Technical parameters：

Product Model: Q40i

Product type: Two channel DSP digital power amplifier

8 Ω power: 1000W X2

4 Ω power: 2000W X2

Analog maximum input： 22dBu

AES maximum input： 0dBS

Frequency response： 20-20KHz +/- 1dB

THD+N： <1%

Damping coefficient： 200

Signal to noise ratio： 102

Working voltage： 180V-240V

Technical parameters：

Speaker model: CA-312DA

Speaker type: Active Speaker

Unit composition: 12×3" Full frequency unit

Frequency response: 120Hz-19kHz （-10dB）

Sensitivity: 95dB

Rated impedance: 6Ω

Sound pressure level: 127 dB（peak）

Rated power: 240W

Horizontal coverage Angle: 100°x20°-30°，Electronic control

Speaker model: CX112P

Speaker type: 12”Active coaxial loudspeaker

Unit configuration: LF：12" unit 2.5"(65mm）Voice coil

HF：1.7"（44mm）Voice coil driver

Frequency response: 70Hz-17kHz(-10dB)

Rated power: LF：250W， HF：50W

Sensitivity: LF：101dB， HF：109dB

Sound pressure level： 131dB (peak)

Radiation Angle: 60°×60°

Crossover point: DSP control

Size (mm) : 583×376×377 (W×H×D)

Module amplifier power: HF：150W，LF：500W (Class D)

Module input link: 1 balanced XLR input / 1 set of Dante signal input and output / 1 set of LINK output

Module DSP control: RS485、USB or Dante

Advantages:

● High power density and light body weight, not only can meet the needs of large sound amplifying system, but also easy to move and install;

● Powerful DSP function, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

● Accurate and intuitive status indicator and LCD function display, working status;

● Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

● Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

● Accurate and sensitive temperature detection protection, to ensure that the machine during heating work in a safe range.

Technical parameters：

Product Model: Q20i

Product type: Two channel DSP digital power amplifier

8 Ω power: 600W X2

4 Ω power: 1200W X2

Analog maximum input： 22dBu

AES maximum input： 0dBS

Frequency response： 20-20KHz +/- 1dB

THD+N： <0.8%

Damping coefficient： 150

Signal to noise ratio： 100

Working voltage： 100V-240V

Technical parameters：

Speaker model: CA-306DA

Speaker type: Active Speaker

Unit composition: 6×3" Full frequency unit

Frequency response: 130Hz-19kHz （-10dB)

Sensitivity: 95dB

Rated impedance: 12Ω

Sound pressure level: 122dB（peak）

Rated power: 120W

Horizontal coverage Angle: 100°x20°-30°，Electronic control

Speaker model: CX110P

Speaker type: 10”Active coaxial loudspeaker

Unit configuration: LF: 10" unit 2"(50mm）Voice coil

HF: 1.7"（44mm）Voice coil driver

Frequency response: 75Hz-17kHz(-10dB)

Rated power: LF: 160W， HF: 40W

Sensitivity: LF: 95dB， HF: 105dB

Sound pressure level： 124dB (peak)

Radiation Angle: 90°×90°

Crossover point: DSP control

Size (mm) : 480×332×340 (W×H×D)

Module amplifier power: HF：100W，LF：500W (Class D)

Module input link: 1 balanced XLR input / 1 set of Dante signal input and output / 1 set of LINK output

Module DSP control: RS485、USB 或 Dante

Advantages:

● High power density and light body weight, not only can meet the needs of large sound amplifying system, but also easy to move and install;

● Powerful DSP function, including routing control, level adjustment, filtering, equalization, voltage limit, delay, inverting, mute, etc.

● Accurate and intuitive status indicator and LCD function display, working status;

● Power amplifier built-in DSP front stage, without external signal front stage, you can match different styles of speakers, easily adjust the required effect, and can be stored in the parameters of multiple speakers, convenient access;

● Environmental monitoring unit can be used to collect voltage, current, temperature and other parameters;

● Accurate and sensitive temperature detection protection, to ensure that the machine during heating work in a safe range.

Technical parameters：

Product Model: Q10i

Product type: Two channel DSP digital power amplifier

8 Ω power: 300W X2

4 Ω power: 600W X2

Analog maximum input： 22dBu

AES maximum input： 0dBS

Frequency response： 20-20KHz +/- 1dB

THD+N： <0.8%

Damping coefficient： 150

Signal to noise ratio： 100

Working voltage： 100-240V

Speaker model: CX108P

Speaker type: 8”Active coaxial loudspeaker

Unit configuration: LF: 8" unit 2"(50mm）Voice coil

HF: 1.7"（44mm）Voice coil driver

Frequency response: 80Hz-20kHz(-10dB)

Rated power: LF: 140W， HF: 40W

Sensitivity: LF: 95dB， HF: 105dB

Sound pressure level： 121dB (peak)

Radiation Angle: 90°×90°

Crossover point: DSP control

Size (mm) : 344×270×256 (W×H×D)

Module amplifier power: HF：100W，LF：200W (Class D)

Module input link: 1 balanced XLR input / 1 set of Dante signal input and output / 1 set of LINK output

Module DSP control: RS485、USB or Dante

Dante Network Transmission

Dante is used for audio transmission to achieve digital and network transmission management. Dante is based on layer 3 IP network technology and adopts Zeroconf protocol to simplify the network operation mode. It can realize long-distance transmission of two-way high-quality big data and perfect synchronous playback with low delay. The device is plug and play, system construction has no topology limitation, installation and configuration is convenient, and wiring is simple and easy.

PoE power supply

Ethernet power supply and audio and data transmission are integrated, simplifying cable layout and meeting Ethernet engineering specifications. PoE network cabling uses 50V dc power supply for bearing Ethernet cables, without restrictions on high-voltage ac cabling, and better meets site safety and fire prevention specifications.

Technical parameters：

Speaker model: CS-8D

Unit configuration: 8"(200mm) Speaker unit，1" Tweeter

Frequency range: 100Hz-18kHz

Rated power: 60W

Sound pressure level: 112dB

Sensitivity: 93dB

Coverage Angle: 100°×100°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Product size (mm) : 281×247(Ф×H)

Opening size (mm) : Ф245

Power amplifier:

Rated power (EIAJTHD=1%,1KHZ) ： 8Ω: 1200W+1200W 4 Ω: 1600W+1600W

RMS output voltage (THD=1%,1KHZ)：98V 8 Ω

THD+N (10% power rating) ：<1%

Imd-smpte (10% power rating) ：<0.5%

Frequency response：-0.5dB 1dB 20-20khz

SNR：>95dB >98dB

Power input: 220-240VAC 50/60Hz

Speaker model: GLA 312a

Speaker category: Dual 18 "active bass reflex ULTRA-low frequency speakers

Unit configuration: 2x18"(460mm）woofer

Frequency response: 40Hz-200Hz(-10dB)

Rated power: 2000W

Sensitivity: 99dB

Nominal impedance: 4Ω

Sound pressure level 139dB（peak）

Power amplifier: 1500W+1500W

Size (mm) : 1066x561x798（WxHxD）

Dante Network Transmission

Dante is used for audio transmission to achieve digital and network transmission management. Dante is based on layer 3 IP network technology and adopts Zeroconf protocol to simplify the network operation mode. It can realize long-distance transmission of two-way high-quality big data and perfect synchronous playback with low delay. The device is plug and play, system construction has no topology limitation, installation and configuration is convenient, and wiring is simple and easy.

PoE power supply

Ethernet power supply and audio and data transmission are integrated, simplifying cable layout and meeting Ethernet engineering specifications. PoE network cabling uses 50V dc power supply for bearing Ethernet cables, without restrictions on high-voltage ac cabling, and better meets site safety and fire prevention specifications.

Technical parameters：

Speaker model: CS-6D

Unit configuration: 6.5"(165mm) Speaker unit，1" Tweeter

Frequency range: 95Hz-20kHz

Rated power: 50W

Sound pressure level: 112dB

Sensitivity: 93dB

Coverage Angle: 100°×100°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Product size (mm) : 264×210 (Ф×H)

Opening size (mm) : Ф221

Power amplifier:

Rated power (EIAJTHD=1%,1KHZ) ： 8Ω: 1200W+1200W 4 Ω: 1600W+1600W

RMS output voltage (THD=1%,1KHZ)：98V 8 Ω

THD+N (10% power rating) ：<1%

Imd-smpte (10% power rating) ：<0.5%

Frequency response：-0.5dB 1dB 20-20khz

SNR：>95dB >98dB

Power input: 220-240VAC 50/60Hz

Speaker model: GLA 312a

Speaker category: Dual 12 "Active triplex array speakers

Unit configuration: HF：3x1.7" Treble driver MF：1x10" MF unit LF：2x12" woofer

Frequency response: 55Hz-20KHz (-10dB)

Rated power: MHF：400W LF：700W

Sensitivity: MHF：105dB LF：102dB

Nominal impedance: MHF：8Ω LF：8Ω

Coverage Angle (H x V) : 120° x 10°，Vertical adjustable

Sound pressure level MHF: 139dB LF: 136dB（peak）

Power amplifier: 1500W+1500W

Size (mm) : 1138x381x645（WxHxD）

Dante Network Transmission

Dante is used for audio transmission to achieve digital and network transmission management. Dante is based on layer 3 IP network technology and adopts Zeroconf protocol to simplify the network operation mode. It can realize long-distance transmission of two-way high-quality big data and perfect synchronous playback with low delay. The device is plug and play, system construction has no topology limitation, installation and configuration is convenient, and wiring is simple and easy.

PoE power supply

Ethernet power supply and audio and data transmission are integrated, simplifying cable layout and meeting Ethernet engineering specifications. PoE network cabling uses 50V dc power supply for bearing Ethernet cables, without restrictions on high-voltage ac cabling, and better meets site safety and fire prevention specifications.

Technical parameters：

Speaker model: CS-4D

Unit configuration: 4"(100mm) Speaker unit

Frequency range: 125Hz-20kHz

Rated power: 30W

Sound pressure level: 108dB

Sensitivity: 91dB

Coverage Angle: 100°×100°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Product size (mm) : 204×185 (Ф×H)

Opening size (mm) : Ф169

Speaker model: MLB 118a

Speaker type: 18 "low frequency active line array speaker

Unit configuration: LF: 18" woofer 4"(100mm）Voice coil

Frequency response: 35Hz-200Hz (-10dB)

Rated power: LF: 600W

Sensitivity: LF: 98dB

Sound pressure level： 133dB (peak)

Radiation Angle: DSP control

Crossover point: 740×515×720 (W×H×D)

Size (mm) : 2000W (Class D) 4Ω

Module amplifier power: 2 balanced XLR inputs or 2 AES inputs or a set of Dante signal inputs and outputs

Module input link: RS485、USB or Dante

Technical parameters：

Speaker model: CA-306D

Unit configuration: 6×3"(75mm) Full frequency unit

Frequency range: 130Hz-20kHz

Rated power: 120W

Sound pressure level: 118dB

Sensitivity: 95dB

Coverage Angle: 100°×50°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Size (mm) : 124×548×154 (W×H×D)

Speaker model: MLA 210a

Speaker type: Dual 10 "two frequency active line array loudspeakers

Unit configuration: LF: 2×10" woofer 2.5"(65mm）Voice coil

HF: 1×3"(75mm) Voice coil high frequency driver

Frequency response: 55Hz-20kHz (-10dB)

Rated power: LF: 600W , HF: 90W

Sensitivity: LF: 99dB , HF: 110dB

Sound pressure level： 136dB (peak)

Radiation Angle: 100°×10° (adjustable)

Crossover point: DSP control

Size (mm) : 740×294×547 (W×H×D)

Module amplifier power: HF：300W，LF：1000W (Class D)/8Ω

Module input link: 2 balanced XLR inputs or 2 AES inputs or a set of Dante signal inputs and outputs

Module DSP control: RS485、USB or Dante

Technical parameters：

Speaker model: CA-402D

Unit configuration: 2×4"(100mm) Full frequency unit

Frequency range: 110Hz-20kHz

Rated power: 60W

Sound pressure level: 113dB

Sensitivity: 93dB

Coverage Angle: 100°×60°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Size (mm) : 145×344×180 (W×H×D)

Speaker model: MLA 208a

Speaker type: Dual 8 "dichotomous active line array loudspeakers

Unit configuration: LF: 2×8"woofer 2"(50mm) Voice coil

HF: 2×1.4"(34mm) Voice coil high frequency driver

Frequency response: 75Hz-19kHz (-10dB)

Rated power: LF: 300W , HF: 60W

Sensitivity: LF: 98dB , HF: 107dB

Sound pressure level： 130dB (peak)

Radiation Angle: 110°×10° (adjustable)

Crossover point: DSP control

Size (mm) : 740×259×416 (W×H×D)

Module amplifier power: HF：300W，LF：1000W (Class D)/8Ω

Module input link: 2 balanced XLR inputs or 2 AES inputs or a set of Dante signal inputs and outputs

Module DSP control: RS485、USB or Dante

Technical parameters：

Speaker model: CA-401D

Unit configuration: 1×4"(100mm) Full frequency unit

Frequency range: 120Hz-20kHz

Rated power: 30W

Sound pressure level: 110dB

Sensitivity: 90dB

Coverage Angle: 100°×90°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Size (mm) : 145×253×180 (W×H×D)

The SLB 118A has a built-in power amplifier with a high-performance digital signal processing system, two full-frequency channel drive systems with two or three SLA 110 single 10-inch line array speakers (preferably two), and one channel drive the SLB 118A. Two balanced line input and one signal output ports, plus one power input and output ports, fully meet the use requirements, but also convenient system expansion. With high performance DSP digital audio signal processor, various scene parameters can be set according to different application requirements and different number of speakers. Through the control software setting and quick key selection, greatly simplifies the system construction process, full frequency channel and ultra low frequency channel can be adjusted independently, can achieve the best effect in a very short time. The SLB 118A uses an efficient class D power amplifier module with a patented L-shaped heat dissipation design combined with an integrated cast aluminum back plate for heat dissipation, resulting in high energy conversion efficiency of up to 2X700W+1800W, compact size and stable performance.

Rich accessory package, including adjustable height support rod, speaker cable, power cord, convenient system quick connection.

Technical parameters：

Speaker model: CNET12D

Speaker type: 12" Active two-division loudspeaker

Unit configuration: 12"(300mm) woofer 1.75"(44mm) Treble driver

Frequency response: 65Hz-19kHz

Rated power: 300W

Sound pressure level: 129dB

Sensitivity: 98dB

Rated impedance: 8Ω

Directivity (H×V) : 80°×50°

Dante Digital network interface: 2×RJ45 interface

Analog interface: 1×XLR Balanced input，1×XLR Balanced output

Active power amplifier module: 600W

Volume knob control: Yes

Central control interface: RS232

Size (mm) : 385×571×365 (W×H×D)