Cart
← Back to Product Catalog

DMIX – MLB 118a

Speakers

More details

Similar Products

hs-28_400px
  • VUE Audiotechnik

VUE Audiotechnik – hs-28

Achieving a better balance of output and musicality starts by focusing on those frequencies that matter most — the critical “sweet spot” between 35 and 80 Hz. After all, a properly designed full-range speaker should be more than capable of operating effectively down to 80 Hz. Most manufacturers design subwoofers that move as much air as possible in order to achieve maximum output. At VUE Audiotechnik, our designers believe that a high-performance subwoofer shouldn’t sacrifice definition in favor of SPL alone. Achieving a better balance of output and musicality starts by focusing on those frequencies that matter most — the critical “sweet spot” between 35 and 80 Hz. After all, a properly designed full-range speaker should be more than capable of operating effectively down to 80 Hz. In the hm-28, dual spider long-excursion woofers feature large, 4-inch voice coils for increased power handling and reduced power compression. Each 18” woofer has a dedicated amplifier and power supply good for total of 4,000 W of power.  Active onboard electronics include system-optimized amplification and DSP for each driver and cabinet combination. 
    Speakers
See the product
worxaudio-waveseries-12A_600px|worxaudio-waveseries-12A_600px
  • WorxAudio

WorxAudio – WaveSeries 12A

The 12A is a two-way, high efficiency, passive loudspeaker. It is designed as a compact high performance system for the reproduction of speech and music program material. The 12A is a two-way, high efficiency, passive loudspeaker. It is designed as a compact high performance system for the reproduction of speech and music program material. The 12A has a one-inch exit compression driver coupled to a 75 X 75 degree wooden waveguide horn reproducing high frequencies, and a twelve-inch cone transducer in a tuned enclosure for the low frequencies. A high quality passive network operates very efficiently, also providing EQ points for a flat frequency response. The sturdy multi-ply plywood enclosure, with a catalyzed polyurethane finish, is designed to withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The 12A can be purchased in two versions. The portable configuration has large recessed handles and a stand mount, while the installation version has a standard twelve point flyware system. Both are available in white, black or unfinished exterior. The 12A excels in a myriad of diverse applications requiring a compact trapezoid enclosure, and offers extraordinary performance and value.
    Speakers
See the product
CMX 2-way Dante Loudspeaker
  • CMX

CMX – DANTE-A10

The CMX DANTE-A10 is a 10" 2-way Dante Loudspeaker.

  • Self-powered network loudspeaker.
  • Ethernet and RS-232 control.
  • Dante™ Network Audio Interface.
  • 13-Ply Russia birch apply/15mm Russia birch plywood.
  • Full integration with other Dante™ enabled mixer, amplifier and controller.
  • Ultra-light voice coil and top class driver units for acoustic optimization.
  • 90°x 60° of horizontal and vertical wide angle dispersion.
  • Heavy duty structure suitable for long year application.
  • Versatile hanging mount, floor stand or wall mount installation.
    Speakers
See the product