Cart
← Back to Product Catalog

DMIX – CS-6D

Speakers

More details

Similar Products

tannoy-qflex-8|tannoy-qflex-8
  • Tannoy

Tannoy – QFlex 8

The QFlex 8 can be used as a standalone self-powered column array device for speech only applications in smaller spaces, where only limited steering is required. For greater degrees of beam control and longer throw, full range applications, a larger QFlex model is recommended. QFlex is a range of digitally steerable, multi-channel, array speaker systems for the professional install market. QFlex is designed as a complete solution for applications with difficult acoustics, such as houses of worship, transportation hubs, convention centres, conference facilities, shopping malls, performing arts centres and museums. QFlex is quite revolutionary in that it is able to achieve even coverage and SPL which is maintained across the listening plane. QFlex is able to create an asymmetrical pattern which allows similar SPLs both in the near and far field. It is able to steer the beam away from surfaces that cause reflections to frequencies beyond 12 kHz, making it the first digitally steerable array to maintain music quality over the desired area of coverage, all in a very architecturally pleasing package. The intuitive BeamEngine GUI allows the designer to specify target areas. Based on those target areas a steering algorithm is generated and tailored for that specific area, rather than having to choose from a limited palette of opening and steering angles. New features introduced on QFlex deliver more resolute safety and monitoring facilities, making it fully compliant in any life safety or mass notification environment. In addition QFlex has been weatherised for outdoor or harsh environments without compromising on the product’s sleek aesthetic, making it perfectly suited for large scale transport hub applications such as within airport terminals and major train stations. Among the key improvements on this front are the addition of Pilot Tone Detection capability, Sentinel SM1 System Monitor and certification to IP53 standards.
    Speakers
See the product
4436A_WHITE_1
  • Genelec

Genelec – 4436A

The 4436 pendant loudspeaker combines studio-quality sound with single cable networked convenience. Powered by PoE and compatible with both Dante and AES67 streams, the 4436 can be combined freely on the network with any other Smart IP loudspeaker model. Designed for quick and clean installation, the 4436 uses PoE to produce uncompromised SPL and acoustic performance. Offering extraordinary coverage, clarity and intelligibility, the 4436 is manufactured in Finland using certified sustainable methods – providing decades of future-proof, reliable service. The 4436 integrates tightly with Genelec Smart IP Manager software – which allows installers to configure an almost unlimited number of rooms, zones, loudspeakers and audio channels, and includes device discovery, a versatile room EQ tool set, system organisation and status monitoring. Day-to-day end user control of basic functions can then be achieved via integration with third party automation systems, or via the simple Smart IP Controller mobile device app.
    Speakers
  • Dante Ch: 2x0
  • 16-bit, 24-bit
See the product
x115
  • Cadac

Cadac – X115

The X115 is a self-powered 2-way high-end cardioid subwoofer, which features 1 x 15" ported woofer at the front and 1 x 12" ported woofer at the rear side. The power output of 4000 W (RMS) ensures for very high SPL down to a frequency of 35 Hz. The subwoofer features a unique software controllable cardioid radiation pattern. The cardioid disperson avoids unwanted energy behind the system and reduces the reveberant field at low frequencies while providing highest accuracy in low frequency sound emission. The combination of mapping optimization and direct cardioid radition pattern denition is the most comprehensive and powerful loudspeaker management system on the market. The X115 can be combined with all products of the CADAC beam forming range. It can be used as ground stack horizontal subwoofer array as well as flown together with the X310 or X606 system in large venues for very high SPL demands in concert applications. Internally, one X115 has 2 amplifier and 2 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto- EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area. Due to the fully integrated connection hardware, the subwoofer can be arrayed to realize larger systems with up to 7.2 meters of acoustic length.

    Speakers
See the product