Cart
← Back to Product Catalog

Genelec – 4436A

Speakers

More details

Similar Products

alm8-4
  • Aimline

Aimline – ALM 8.4

The new ALM series transmits clear intelligible live announcements and precise messages. Thanks to the digitally controllable directional effect, the entire frequency spectrum can be heard in the desired sound coverage area. The combination of a long range and a wide horizontal opening angle has the advantage that just a few ALM loudspeakers cover a large area. Therefore, the ALM loudspeakers are particularly suitable for installations where a high level of speech intelligibility is required, for example in lecture halls, places of worship, airport terminals or shopping center. The ALM series is also equipped with a 24 volt power supply and is compatible with an EN 54 certifie emergency power supply system.

Configuring line array speakers has never been easier

Because of it´s modular structure of up to three lengths, the ALM series is easy to install. The automatic detection of your own IP address in the PAN C software accelerates the configuration process. The intuitive and uncomplicated PAN C software makes the configuration of line array speakers easier than ever. The software calculates the adjustable sound alignment as well as all internal parameters in real time.

Each ALM loudspeaker is designed as a real two-way system and has vertically arranged broadband loudspeakers for the low and mid-range as well as 4 tweeters for a silky, brilliant reproduction of the high-frequency range. Each individual loudspeaker is powered and controlled by a separate power amplifier and DSP channel. Using a complex computational algorithm in the DSP units, the vertical dispersion can be continuously controlled in the range between 5° – 40°. The desired range (focus distance) can also be adjusted continously.

Two analog channels, two DANTE® channels plus a 100 V input are available as inputs. The input DSP offers an adjustable limiter, a gate, delay function and a 10-band parametric Equalizer with IIR filters for each input. Due to the discrete visual design and the appealing housing the ALM series can be easily integrated into architecturally demanding environments. The variable sound dispersion makes difficult acoustic situations easy to handle and can be installed just with little effort.

    Speakers
See the product
6301DT Broadcast Studio
  • Fostex

Fostex – 6301DT

After over 35 years as the industry standard in active confidence monitoring, the Fostex 6301 has officially entered the networked-audio age with the release of the 6301DT, the world's first ultra-rugged Dante-enabled Fostex monitor. With the same physical dimensions as the current 6301N, the 6301DT finally answers the challenge of how to quickly and easily set up a portable or fixed monitoring solution on a Dante network. Broadcast facilities, studio, conference rooms, houses of worship, medical centers, theatres, and installations of all types can now benefit from the rock-solid and trusted tool of audio professionals everywhere. 

Main Features

• 20W Class-D power amplifier for higher output level and less power consumption.

• Dedicated 4-inch full range driver for clear audio reproduction.

• RJ45 Dante & 1/4” TS analog inputs.

• Supports sample rates up to 96kHz via Audinate’s Ultimo chip.

• Two channels of monitoring in one monitor: acts as a two-channel device on the Dante network, with a switch on the back panel to select channel 1, 2 or 1+2 (mixed) for output.

• Ultra-rugged die-cast aluminum enclosure.

• Recessed front-panel knob, switch & speaker grille to prevent inadvertent damage in case of a fall.

• Switching power supply accepts 100 V to 240 V AC.

• Physical dimensions identical to the rest of the 6301N series for easy upgrade.

• Optional EB-6301 mounting bracket allows easy surface-mounting at any angle.

Specifications

Speaker Section:

Enclosure type:                  Closed

Unit:                                    4” Full Range

Frequency response:         70 Hz – 15k Hz

Sound Pressure Level:       85dB / W (1m)

Maximum SPL:                   98dB

Amplifier Section:

Inputs:                                Dante Input (RJ45), 1/4” TS Phone (unbalanced)

Analog Input Impedance:   10k ohm or more

Rated output:                      20W

Distortion (T.H.D.):             0.05% (1kHz / 1W output)

Residual Noise:                  -65dBV

Input Sensitivity:                 Analog (unbalanced): -14 dBV (0.2 Vrms)

General:

Dimensions:                       120 (W) x 189 (H) x 120 (D) mm

Weight:                               2.3kg

Power Requirement:          AC 100 – 240V (50/60Hz)

Power Consumption:          10W

    Speakers
See the product
ALFC-657D
  • Alfatron

ALFC-657D

The ALFC-657D are 2 x 30 watt full-range Dante ceiling speakers. It consists of a Dante Master speaker (ALFC-657DM) and a secondary Slave speaker (ALFC-657DS). The Master speaker contains a 2 channel POE amplifier connected via the Dante audio network and provides an amplified speaker output for the slave speaker. As each pair of ALFC-657D speakers are powered via the network POE switch, it makes it a convenient choice for distributed sound reinforcement solutions. Features:
  • Dante Master flush-mounted ceiling speaker with secondary Slave flush-mounted ceiling speaker
  • 2-Way full-range speaker design with coaxial HF transducer.6.5″ woofer with moisture/water-proof composite diaphragm
  • 1″ silk dome tweeter with adjustable angle, producing rich mids, delicate highs and an overall warm sound.
  • 2 x 30watt built-in 2-channel amplifier
  • Wide, flat frequency response and low distortion.
  • POE powered
  • Flush-mounted ceiling installation
  • Metal back can.
  • Weather resistant material for moisture and UV protection.IP rating not applicable as ALFC-657-DM is an ‘active’ speaker with built-in amplifier
  • Border-less magnetic grille for easy installation and maintenance.
    Speakers
See the product