Features
1. Advanced modular design, four groups of receiving modules, each group has a built-in independent CPU processing system to complete audio processing and transmission.
2. Ultra-high-bandwidth UHF 600MHZ-700MHZ, suitable for occasions that require a large number of microphones, making it easy to form a wireless conference microphone system.
3. Superb reception, overcome long distance and complicated field environments.
4. Use Ethernet cable to connect directly to the network-no need to add and solder audio cables.
5. Can control Dante routing and settings through a computer
6. The entire scalable Dante system has 512 two-way audio channels
7. Both the network volume and the receiver volume can be adjusted separately.
Technical parameters:
IF frequency: first IF: 110MHz, second IF 10.7MHz
wireless interface: BNC / 50 ohm
sensitivity: 12 dB (80dBS / N )
Sensitivity adjustment range: 12-32 dB
spurious suppression: ≥75dB
Maximum output intensity: +10 dBV
Frequency range: 600-700MHz
Modulation mode: FM
adjustable range: 50MHz
Number of channels: 100 or 200)
Channel interval: 250 KHz
frequency stability: within ± 0.005%
dynamic range: 100dB
maximum frequency deviation: ± 45KHz
audio response: 80Hz-18KHz (3dB)
comprehensive signal-to-noise ratio:> 105dB
Comprehensive distortion: ≤0.5%
Working temperature: -10 ℃ ~ + 40 ℃

The Model 5421 Dante^® Intercom Audio Engine is a high-performance, cost-effective, flexible solution for creating party-line (PL) intercom circuits. It's directly compatible with the Studio Technologies' range of 1-, 2-, and 4-channel Dante-enabled beltpacks and other interface-related products. The unit is suitable for use in fixed and mobile broadcast facilities, post-production studios, commercial and educational theater environments, and entertainment applications.

Key Features

• 16-channel audio engine creates multiple virtual party-line (PL) intercom circuits
• Dante audio-over-Ethernet technology
• Auto Mix for enhanced audio performance
• Supports Studio Technologies' intercom beltpacks
• DDM support and AES67 compliant
• PoE powered, Gigabit Ethernet interface
• Configured using STcontroller application
• Table-top, portable, or optional rack-mount installation

The X310 CARDIOID is a self-powered 3-channel high-end cardioid subwoofer, which features 3 x 10" ported woofers and unique software controllable cardioid radiation pattern. The power output of 1500 W (RMS) ensures for very high SPL down to a frequency of 60 Hz. The cardioid disperson avoids unwanted energy behind the system and reduces the reveberant field at low frequencies while providing highest accuracy in low frequency sound emission. The combination of mapping optimization and direct cardioid radition pattern definition is the most comprehensive and powerful loudspeaker management system on the market. It is seamlessly constructed into the software, cabling and connection concept. The cabinet can be used as a cardioid extension or normal LF extension for the X310. It shares the same outer dimensions and flyware and can be own together with the X310 as one line like conventional LF extensions or flown behind the X310 with the cardoid flying frame to set up a beamforming cardoid line array system. Due to the fully integrated connection hardware, the subwoofer can be stacked to realize larger systems with up to 10 meters of acoustic length. Internally, one X310 CARDIOID has 3 amplifier and 3 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.

The X310 beam forming array module combines a comprehensive package in all relevant disciplines without compromise. With the X310, even at most demanding and complex sound installations can be realized. The combination of mapping optimization and direct array definition is the most comprehensive and powerful loudspeaker management system on the market. The X310 is a self-powered 3-way high-end beam forming array loudspeaker, which features 3 x 10" ported woofers for LF, 6 x 5" woofers for the MF and 13 x 1" compression drivers for the HF, which are mounted onto waveguide horns. The X310 can be used as single cabinet with programmable vertical dispersion (point source functionality) and as beamforming array for fixed installation as well as for mobile applications. If one X310 is combined with one X310-CARDIOID cabinet, the system will have cardioid dispersion for the LF range. The array is used as straight line in most applications as the coverage on listener areas is adjusted by beamforming. Due to the fully integrated connection hardware, the cabinet can be stacked to realize larger systems with up to 10 meters of acoustic length. With the small source distances, the beamforming capabilities of the column are excellent even at very high frequencies. Internally, one X310 has 22 amplifier and 22 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.

The X115 is a self-powered 2-way high-end cardioid subwoofer, which features 1 x 15" ported woofer at the front and 1 x 12" ported woofer at the rear side. The power output of 4000 W (RMS) ensures for very high SPL down to a frequency of 35 Hz. The subwoofer features a unique software controllable cardioid radiation pattern. The cardioid disperson avoids unwanted energy behind the system and reduces the reveberant field at low frequencies while providing highest accuracy in low frequency sound emission. The combination of mapping optimization and direct cardioid radition pattern denition is the most comprehensive and powerful loudspeaker management system on the market. The X115 can be combined with all products of the CADAC beam forming range. It can be used as ground stack horizontal subwoofer array as well as flown together with the X310 or X606 system in large venues for very high SPL demands in concert applications. Internally, one X115 has 2 amplifier and 2 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto- EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area. Due to the fully integrated connection hardware, the subwoofer can be arrayed to realize larger systems with up to 7.2 meters of acoustic length.

The S215 is a self-powered high-end subwoofer, which features 2 x 15" ported woofers. The power output of 4000 W (RMS) ensures for © very high SPL down to a frequency of 40 Hz. It can be combined with all products of the CADAC range and be used as subwoofer extension in ground stack configuration for point sources or line arrays and can be also used as ground stack horizontal subwoofer array. The DSP-electronic has 2 power amplifiers and 2 DSP channels. Internally, one S215 has 2 amplifier and 2 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the dispersion can be adjusted and optimized according to the listener area for the application of subwoofer arrays. CMAP enables to create arbitrary radiation patterns for the listener area with ground stack horizontal arrays.

The S218 is a self-powered high-end subwoofer, which features 2 x 18" ported woofers. The power output of 4000 W (RMS) ensures for © very high SPL down to a frequency of 35 Hz. It can be combined with all products of the CADAC range and be used as subwoofer extension in ground stack configuration for point sources or line arrays and can be also used as ground stack horizontal subwoofer array. The DSP-electronic has 2 power amplifiers and 2 DSP channels. Internally, one S218 has 2 amplifier and 2 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the dispersion can be adjusted and optimized according to the listener area for the application of subwoofer arrays. CMAP enables to create arbitrary radiation patterns for the listener area with ground stack horizontal arrays.

The CA124 beam forming array module combines a comprehensive package in all relevant disciplines without compromise. With the CA124, even at most demanding and complex sound installations can be realized. The combination of mapping optimization and direct array definition is the most comprehensive and powerful loudspeaker management system on the market. The CA124 is a selfpowered 2-way high-end beam forming array loudspeaker, which features 12 x 4" wideband woofers and 36 x 1" dome tweeters. Due to the fully integrated connection hardware, the column can be stacked to realize larger systems with up to 14 meters of acoustic length. With the small source distances, the beamforming capabilities of the column are excellent even at very high frequencies. Internally, one CA124 has 48 amplifier and 48 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.

The CP124 beam forming array module with internal passive crossovers between LF and HF way. It is intended as basic beamforming column loudspeaker for the CADAC product range. The combination of mapping optimization and direct array definition is the most comprehensive and powerful loudspeaker management system on the market. The CP124 is a self-powered 2-way high-end beam forming array loudspeaker, which features 12 x 4" wideband woofers and 12 passive crossovers, for 36 x 1" dome tweeters. Due to the fully integrated connection hardware, the column can be stacked to realize larger systems with up to 14 meters of acoustic length. Internally, one CP124 has 12 amplifier and 12 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.

The X606 beam forming array module combines a comprehensive package in all relevant disciplines without compromise. With the X606, even at most demanding and complex sound installations can be realized. The combination of mapping optimization and direct array definition is the most comprehensive and powerful loudspeaker management system on the market. The X606 is a self-powered 3-
way high-end beam forming array loudspeaker, which features 6 x 6.5" ported woofers for LF, 12 x 3.5" woofers for the MF and 24 x 1" dome tweeters for the HF. The X606 can be used as single cabinet with programmable vertical dispersion (point source functionality) and as beamforming array for fixed installation as well as for mobile applications. If one X606 is combined with one X606-CARDIOD cabinet, the system will have cardioid dispersion for the LF range. The array is used as straight line in most applications as the coverage on listener areas is adjusted by beamforming. Due to the fully integrated connection hardware, the column can be stacked to realize larger systems with up to 10 meters of acoustic length. With the small source distances, the beamforming capabilities of the column are excellent even at very high frequencies. Internally, one X606 has 42 amplifier and 42 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.

The X606 CARDIOID is a self-powered 3-channel high-end cardioid subwoofer, which features 6 x 6.5" ported woofers and unique software controllable cardioid radiation pattern. The power output of 1200 W (RMS) ensures for very high SPL down to a frequency of 75 Hz. The cardioid disperson avoids unwanted energy behind the system and reduces the reveberant field at low frequencies while providing highest accuracy in low frequency sound emission. The combination of mapping optimization and direct cardioid radition pattern definition is the most comprehensive and powerful loudspeaker management system on the market. It is seamlessly constructed into the software, cabling and connection concept. The cabinet can be used as a cardioid extension or normal LF extension for the X606. It shares the same outer dimensions and flyware and can be flown together with the X606 as one line like conventional LF extensions or flown behind the X606 with the cardoid flying frame to set up a beamforming cardoid line array system. Due to the fully integrated connection hardware, the subwoofer can be stacked to realize larger systems with up to 10 meters of acoustic length. Internally, one X606 CARDIOID has 6 amplifier and 6 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.

The NHD-510-TX is a powerhouse in AV over IP technology, integrating HDMI and USB-C inputs for unparalleled connectivity with both traditional and modern digital devices. Enhanced with Dante AV-A support for superior audio over IP, HDMI loop-out for local display connectivity, and advanced audio switching capabilities, it stands as an essential component for any high-definition setup. As a 1 Gigabit solution, it confidently supports 4K60 4:4:4 video resolution, ensuring crystal-clear image quality across all applications.

Whether upgrading commercial spaces, educational institutions, or secure government facilities, the NHD-510-TX delivers an immersive audiovisual experience with HDR10 and Dolby Vision support, minimal latency, and the ability to connect up to 7 USB devices simultaneously. This device is designed to meet the rigorous demands of any complex installation, offering a versatile, high-performance solution for contemporary AV challenges.

DR-14.2 belongs to a new generation of compact rack mounted digital mixers.  Easy to use like an analog device, it includes state of the art DSP functions which bring a mass of capabilities and audio quality never met before in such a small format. More focused on fixed installation, DR-14.2 can also be the perfect tool for music bands, the main mixer for clubs or a part of a device package for rental and AV market. Remote control facilities are available through Ethernet or USB ports. A tablet App can also be used for wireless control. The mixer features other extended possibilities to communicate with external equipment like an optional Dante card for audio transport or a multi-track USB interface for recording. A powerful DSP offers functions like Noise/Gate, Compressor/Limiter, Parametric/Graphic EQ, Feedback Canceller, Ducker, Auto Mixer, PAN, Phase Reverse, Time Delay, plus a large choice of high quality digital effects.

The MATRIX-A6 is at the heart of a music distribution, paging, discussion and zone management system for commercial and fixed installations. It has 6 inputs and 6 outputs in a single device powered by a state-of-the-art DSP. Easy to use and install through an intuitive graphical interface, it offers a large number of features for a wide range of applications. The operation of MATRIX-A6 has been designed for three different types of users. The basic level is for authorized operators only to manipulate a microphone and remote volume controllers, the device being transparent to them. The second level is for authorized operators able to change the signal routing and volume from time to time by simple and fast action. Intuitive controls such as input and output selectors, a scroll wheel / data push button, and an LCD display are available for this purpose. Finally, for more precise settings, a PC software editor is available, including powerful DSP functions. It uses a familiar hardware-like layout to allow for a short programming schedule and fast hardware implementation.

• 6 analog IN x 6 analog OUT
• 4 Volume Controller ports
• Optional Dante
• DSP functionalities
• Fix architecture for easy and quick operation
• Intuitive GUI with PC and Apps software editor

ULTIMO-2/4 is an optional module used to extend the communication capabilities of audio devices by enabling bi-directional audio transport such as 2/4 channel inputs and 2/4 channel outputs. It is based on Dante format which is a combination of software, hardware, and network protocols that deliver uncompressed, multi-channel, low-latency digital audio over a standard Ethernet network. It incorporates features such as automatic device discovery, plug and-play networking, user-editable device names, channel labels and software bases audio routing. The ULTIMO-2/4 used a 100Mbps communication rate with a redundant network connection via switch. The Green and Yellow Led on the RJ45 connectors inform about the working status including connection and data transfer.

• 2 x 2 / 4 x 4 audio channels
• Very low latency
• Plug and play
• 100Mbps with redundancy

TS-P1212D is a high-performance, multi-audio processing technology highly integrated digital audio processor with 12 input and 12 output, adopting DSP audio processing technology to provide users with excellent sound quality; With built-in feedback suppression, echo cancellation, noise elimination, Dante network transmission and other functions, to achieve high-quality sound. It’s mainly used in large and medium-sized places, to meet multiple application requirements for the video conferencing, stadium, conference center, auditorium, banquet hall, exhibition hall, multimedia conference, command center and other public sound systems.

The SOFIA 565 provides analog, AES3-digital and AoIP-streaming audio outputs. The Web Interface enables remote tuning, streamed audio, station switching, alarms, and more.

Multiple stations can be sequentially monitored using the programmable StationRotation™ feature. The SOFIA 565 includes a built-in BandScanner™, a real-time clock and full SNMP functionality.

Features:

• Fulltime off-air program audio is available simultaneously as L/R-analog, AES3-digital and Dante®-based AES67 AoIP streaming, all with adjustable levels, plus a multi-listener Internet IP stream and front-panel headphone jack.
• Install the SiteStreamer+ within the reception contour of your station and monitor off-air analog FM via the Web from anywhere in the world.
• The SOFIA 565 Internet-listening stream supports up to 10 listeners at once.
• Front-panel alarms and/or rear-panel ‘tallies’ indicate Audio Loss, Low Signal, RDS Errors, and FM Reception Loss.
• Easy front-panel setup uses jog-wheel menu navigation and the front-panel readout. The corresponding Web interface offers a detailed presentation and additional options.
• Gives local and remote readout of all pertinent FM/RDS data.
• Enhanced alarm logging includes the duration of each alarm, and there is virtually no limit to the number of alarms that can be logged.
• The built-in BandScanner displays a spectrum plot of the entire FM band (or a user-selected portion).
• The half-rack package features an OLED hi-res graphic display, wide-range LED level meters and individual alarm LEDs with rear-panel tallies.
• GPOs may be user-assigned to specific alarm functions.
• SNMP utility is fully supported.
• Real-Time Clock has battery backup.

The SOFIA 567 provides analog, AES3-digital and AoIP-streaming audio outputs. The Web Interface enables remote tuning, streamed audio, station switching, alarms, and more.

Multiple stations can be sequentially monitored using the programmable StationRotation™ feature. The SOFIA 567 includes a built-in BandScanner™, a real-time clock and full SNMP functionality.

Features:

• Fulltime off-air program audio is available simultaneously as L/R-analog, AES3-digital and Dante®-based AES67 AoIP streaming, all with adjustable levels, plus a multi-listener Internet IP stream and front-panel headphone jack.
• Install the SiteStreamer+ within the reception contour of your station and monitor off-air analog FM via the Web from anywhere in the world.
• The SOFIA 567 Internet-listening stream supports up to 10 listeners at once.
• Front-panel alarms and/or rear-panel ‘tallies’ indicate Audio Loss, Low Signal, and AM Reception Loss.
• Easy front-panel setup uses jog-wheel menu navigation and the front-panel readout. The corresponding Web interface offers a detailed presentation and additional options.
• Enhanced alarm logging includes the duration of each alarm, and there is virtually no limit to the number of alarms that can be logged.
• Real-Time Clock has battery backup.
• GPOs may be user-assigned to specific alarm functions.
• The half-rack package features an OLED hi-res graphic display, wide-range LED level meters and individual alarm LEDs with rear-panel tallies.
• SNMP utility is fully supported.
• The built-in BandScanner displays a spectrum plot of the entire AM band (or a user-selected portion).

The AMK DT84-C-X loudspeaker is powered by a POE+ network amplifier with Dante™ input. It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required. The speaker system has a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 802, highly efficient coaxial loudspeaker. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations.

One PoE+ amplified speaker can power a total of (4) speakers, including (3) additional passive speakers, with one separate audio channels for each speakers.

The audio network system is also compatible with AES67 and it is Dante Domain Manager Ready. Which makes this speaker system to be flexible with other audio network systems as well.

The CX802 loudspeaker driver has excellent dispersion, wide bandwidth and a smooth frequency response which makes this the top choice for today’s overhead commercial applications.

This assembly can be used in wide range of projects for paging and background music applications. The DT84-C-X is ideal for hotels, education, hospitals, retail stores, performing art centers, restaurants, airports, houses of worship, and board rooms. The end users will appreciate both the sound and visual quality of these speakers.

The AMK DS81-A-X is a Dante™ audio network addressable and self-amplified ceiling speaker system. The speaker is powered by PoE+ network switch meaning no external power supply is required.

The speaker includes a Class D amplifier which provides effective use of power. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations. The system comes with 8” coaxial 40W loudspeaker driver, CX802, that has excellent dispersion, wide bandwidth and a smooth frequency response makes this the top choice for today’s overhead commercial applications.

The audio network system is also compatible with AES67 and it is Dante Domain Manager Ready. Which makes this speaker system to be flexible with other audio network systems as well.

This assembly can be used in wide range of projects for paging and background music applications. The DS81-A-X is ideal for hotels, education, hospitals, retail stores, performing art centers, restaurants, airports, houses of worship, and board rooms.

The AMK DT64-B-X loudspeaker is powered by a POE+ network amplifier with Dante™ input. It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required. The speaker system has a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 602, highly efficient coaxial loudspeaker. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations.

One PoE amplified speaker can power a total of (4) speakers, including (3) additional passive speakers, with (2) speakers per audio zone.

The audio network system is also compatible with AES67 and it is Dante Domain Manager Ready. Which makes this speaker system to be flexible with other audio network systems as well.

The CX602 loudspeaker driver has excellent dispersion, wide bandwidth and a smooth frequency response which makes this the top choice for today’s overhead commercial applications.

This assembly can be used in wide range of projects for paging and background music applications. The DT64-B-X is ideal for hotels, education, hospitals, retail stores, performing art centers, restaurants, airports, houses of worship, and board rooms. The end users will appreciate both the sound and visual quality of these speakers.

True diversity quad-channel wireless microphone with Dante

DMIC Dante Microphone is a type of microphone that with built-in Dante module supporting POE power supply. It can be directly connected to the Dante network, providing you a rewarding experience that a extremely low latency, high fidelity and low cost solution for paging and announcement.

The DLI-430 is an electronically controllable line source speaker from the award-winning Focus series. The elegant high-performance speakers are the very first choice for professional voice and music applications. Thanks to the Fohhn Beam Steering Technology, they can be integrated almost invisibly and offer the best results in complex acoustic environments.

Main features

• 32 × 4" high performance driver (frequency response: 60 Hz – 17 kHz)
• Built-in 32-channel digital amplifier, 32 DSP channels
• SPL max.: 136 dB
• Convenient real-time control of vertical dispersion with Fohhn Audio Soft
• Vertical beam width: 0° to 90°, sound inclination angle: -40° to +40° (adjusted in 0.1° increments)
• Acoustic centre displaceable over entire line length
• Fohhn Two Beam Technology (two independent dispersion beams)
• Fohhn Side Lobe Free Technology (suppression of side lobes)
• User DSP with 10-band parametric EQ, X-over, delay, compressor etc.
• Available in RAL, NCS, Pantone and with Fohhn Texture Design
• Easily combined with active and passive Fohhn subwoofers
• Integration in evacuation systems according to DIN EN 60849 / VDE 0828
• Integration in media controls such as Crestron, AMX, Extron and more.
• Green power standby mode

The DLI-330 is an electronically controllable line source speaker from the award-winning Focus series. The elegant high-performance speakers are the very first choice for professional voice and music applications. Thanks to the Fohhn Beam Steering Technology, they can be integrated almost invisibly and offer the best results in complex acoustic environments.

Main features

• 24 × 4" high performance driver (frequency response: 60 Hz – 17 kHz)
• Built-in 24-channel digital amplifier, 24 DSP channels
• SPL max.: 133 dB
• Convenient real-time control of vertical dispersion with Fohhn Audio Soft
• Vertical beam width: 0° to 90°, sound inclination angle: -40° to +40° (adjusted in 0.1° increments)
• Acoustic centre displaceable over entire line length
• Fohhn Two Beam Technology (two independent dispersion beams)
• Fohhn Side Lobe Free Technology (suppression of side lobes)
• User DSP with 10-band parametric EQ, X-over, delay, compressor etc.
• Available in RAL, NCS, Pantone and with Fohhn Texture Design
• Easily combined with active and passive Fohhn subwoofers
• Integration in evacuation systems according to DIN EN 60849 / VDE 0828
• Integration in media controls such as Crestron, AMX, Extron and more.
• Green power standby mode

The DI-4.2000 is a digital 4-channel amplifier Made in Germany. The DSP amplifiers developed and manufactured by Fohhn offer high power density and excellent sound. The amplifiers are designed for mobile sound systems and fixed installation. They provide all the essential features and almost limitless connectivity in terms of audio inputs. Whether AES/EBU, Dante or Analogue – they offer maximum flexibility thanks to exchangeable connection modules. Corresponding speaker presets ensure optimum performance and reliability.

Main features

• Output power: 4 × 2000 W / 4 ohms / 100 V / 70 V
• Can be remotely operated and controlled over Fohhn Net
• Extensive DSP processing, controllable in real time with the Fohhn Audio Soft
• Maintains peak power over several seconds
• Temperature controlled, low noise fan
• Auto Power Save for minimum standby power requirements
• Installation size: 2 U / 19"
• Light weight, only 9.9 kg

The DI-2.4000 is a digital 4-channel amplifier Made in Germany. The DSP amplifiers developed and manufactured by Fohhn offer high power density and excellent sound. The amplifiers are designed for mobile sound systems and fixed installation. They provide all the essential features and almost limitless connectivity in terms of audio inputs. Whether AES/EBU, Dante or Analogue – they offer maximum flexibility thanks to exchangeable connection modules. Corresponding speaker presets ensure optimum performance and reliability.

Main features

• Output power: 2 × 4000 W / 4 ohms / 100 V / 70 V
• Can be remotely operated and controlled over Fohhn Net
• Extensive DSP processing, controllable in real time with the Fohhn Audio Soft
• Maintains peak power over several seconds
• Temperature controlled, low noise fan
• Auto Power Save for minimum standby power requirements
• Installation size: 2 U / 19"
• Light weight, only 9.8 kg