BARE – LA-218L


More details

Similar Products

Spik5-front
  • FRENETIK

FRENETIK – Spik 5

Compact 2-way coaxial wide-opening amplified processor speaker, Dante™ PoE+ • 60W class D amplifier board with integrated latest generation DSP • Wide and homogeneous directivity 95° x 95° • Wooden cabinet • Euroblock connector for use with external amplification • Remote control of volume, bass, treble via FRENETIK Adjust software • Board temperature monitoring • No logo on front panel

Technical data :
Type: Amplified 2-way coaxial speaker, Dante™ PoE+
Power (passive mode): 60 W (8 ohms)
Amplification: 60 W (classe D)
Dante™ Receiver: 1 (16 / 24 / 32 bit - 44.1 à 96 kHz)
Transducers: 1 x 5" woofer / 1 x 1" tweeter
Peak SPL capacity (1 m): 112 dB
Bandwidth (-10 dB): 90 Hz – 20 kHz
Directivity (H x V): 95° x 95°
Input connectors: 1 x RJ45 (Dante™ active mode) + 1 Euroblock (passive mode)
Insert: 4 x M6
Power supply: PoE+ (IEEE 802.3 at)
Dimensions: 165 x 165 x 193 mm
Weight: 2.50 kg

    Speakers
ipd4cm52
  • SoundTube

SoundTube – IPD-CM52s-BGM-II

Engineered for applications with limited plenum space. Incorporates a SoundTube-specific shallow backcan with an installed depth of 3.5 inches. One 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 65 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 84.5 dB sensitivity, 16 ohm impedance. Incorporates a painted steel grille for lasting durability. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 1480 and 2043 listed.

    Speakers
  • Dante Ch: 1x0
  • 24-bit
K-array_-_KRX802|K-array_-_KRX802
  • K-array

K-array – KRX802

The KRX802 is composed of six KX12 line array elements standing on two KMT218 18" subwoofers by means of an extendable pole and proper joining and stacking hardware. The KRX802 is composed of six KX12 line array elements standing on two KMT218 18" subwoofers by means of an extendable pole and proper joining and stacking hardware. Delivers maximum SPL, very low frequency and best bass response Easily-adjustable fixed angles and modular capabilities allow for various arrangements of system setup
    Speakers