S-Track – Eagle XDP8


Similar Products

hs-25_400px
  • VUE Audiotechnik

VUE Audiotechnik – hs-25

Think of the hs-25 as the hs-28’s “bully” little brother, it also deploys our patent-pending Active Compliance Management technology. ACM combines both band-pass and vented alignments into a single enclosure. The hs-25 places two precision-designed, 15-inch transducers into this configuration, with both woofers sharing a common vented chamber. Think of the hs-25 as the hs-28’s “bully” little brother, it also deploys our patent-pending Active Compliance Management technology. ACM combines both band-pass and vented alignments into a single enclosure. The hs-25 places two precision-designed, 15-inch transducers into this configuration, with both woofers sharing a common vented chamber. One woofer’s frontal radiation is direct, while the second woofer’s frontal radiation drives the band-pass chamber. Onboard electronics include amplifier module that supplies 830W pure sine wave power (2000W “peak” power) to each woofer and DSP to ensures the precise phase arrivals of the front facing woofer and both vents. The combination of ACM, sophisticated DSP and active electronics allow the hs-25 to deliver much higher output throughout its operating bandwidth from a footprint that’s smaller than most dual 15-inch vented designs.
    Speakers
barebr10p6
  • BARE

BARE – BR-10P6

BARE BR-10P6 POE Ceiling Speakers

● Drive: 1x6.5 "+3x0.5" coaxial

● Frequency response range: 80Hz-20KHz (± 3dB)

● Maximum sound pressure level: 105dB

● Continuous power: 30W

● Impedance: 8 Ω

● Cover angle (H × V): 90 ° × 90 °

● Audio input Type Dante

    Speakers
alpoeset2
  • Aimline

AIMLINE – AL2.0PoE Set

The AIMLINE PoE series includes column loudspeaker with an integrated power amplifier that uses Power over Ethernet (PoE +). There is no need for any additional power supply. Thanks to highly efficient power electronics and a specially developed power amplifier an output of 30 W / 60 W peak (when using a PoE+ supply) can be achieved. The AL2.0PoE set consists of a pair of speakers. An active and a passive one. Each equipped with two 4 "drivers. Two DANTE channels are available with 10-Bd IIR filters, delay and the 24 internal presets offer all necessary configurations.

    Speakers