The 4-channel DSP digital power amplifier is composed of a 3.97-inch color TFT resistive touch screen module and an audio processing module. There are 4 analog audio balanced signal input terminals, which are converted into 4 balanced outputs, and a series of software digital processing is carried out in the middle. .
NAJA Y201、DY201系列产品是鹅颈麦克，NAJA Y201系列支持模拟信号输入，NAJA DY201是Dante网络麦克风，可实现模拟音频信号转为数字音频信号，支持PoE供电和Dante网络信号传输。
Dolphin系列数字音箱管理器内置高性能DSP处理芯片，支持多路模拟、Dante信号输入输出，自带31段参数均衡器，增益控制，压缩器，延迟等功能。
Dolphin系列数字音箱管理器内置高性能DSP处理芯片，支持多路模拟、Dante信号输入输出，自带31段参数均衡器，增益控制，压缩器，延迟等功能。
Dolphin系列数字音箱管理器内置高性能DSP处理芯片，支持多路模拟、Dante信号输入输出，自带31段参数均衡器，增益控制，压缩器，延迟等功能。
Dolphin系列数字音箱管理器内置高性能DSP处理芯片，支持多路模拟、Dante信号输入输出，自带31段参数均衡器，增益控制，压缩器，延迟等功能。
EAGLE DP6音箱的音频传送采用Dante传输，实现数字化、网络化的传输管理。Dante是基于3层的IP网络技术，采用Dante协议，简化了网络的运行模式，可实现双向高质量大数据远距离传输，低延时完美实现同步播放，设备即插即用，系统搭建没有拓扑限制，安装配置非常方便，布线简单。
NAJA A201、DA201是一款桌面阵列麦克风，A201是模拟接口；DA201是内置 Dante 和 PoE 模块，可以直接接入 Dante 网络，为点对点的音频连接提供一种低延时、高保真和低成本的解决方案。
DCORE系列网络音频服务器是针对Dante开发的DSP处理设备，仅有Dante的数字信号处理，无模拟信号处理。将其接入Dante网络中即可实现音频信号的网络传输与处理。最大支持64×64，采用模块化配置，信号处理更加高效，支持噪声消除算 法（AFC)、支持回声消除算法（AEC)、支持噪声消除算法（ANC)。支持最多64路输入输出通道的矩阵混音和16路全功能信号处理。
DPanel 系列墙面接口机，其拥有模拟输入和 Dante 数字输入，模拟线路输出和 Dante 数字输出，模拟输入支持幻象供电以及手动前级增益调节。
DA22 supports Dante and AES digital audio interface protocol, which can realize two-way transmission of digital audio signals via XLR cable.
Features
· Compact design, easy to use, supports hot-plug;
· Easily and freely convert between analog audio signal and DanteTM digital audio signal;
· Built-in 2 input or 2 output audio channels;
· Extends audio, control, Ethernet, and power over a single affordable network cable.
· Replaces multiple analog or multi-core cables with only a network cable, cost-effective, versatile;
· Extends uncompressed high-quality audio signal with near-zero latency;
· Transmits high quality 2-channel audio safely and reliably;
· Perfectly supports Dante software, the network and audio routing can be easily expanded andreconfigured with just a few mouse clicks;
Ostrich series of products is an audio interface device based on Dante international general protocol. It can realize analog audio signal input, convert to digital audio signal output, route to any Dante audio transmission network device by Dante protocol, and realize high quality, long distance and low delay signal transmission. It supports the access of any Dante network digital audio, which can be converted into analog audio signal output, and can be connected to traditional analog audio devices such as mixer, power amplifier, processor and so on. The device uses high quality AD/DA signal conversion chip, provides 48 V of phantom power supply, and can access higher quality capacitive microphone.
Ostrich series of products is an audio interface device based on Dante international general protocol. It can realize analog audio signal input, convert to digital audio signal output, route to any Dante audio transmission network device by Dante protocol, and realize high quality, long distance and low delay signal transmission. It supports the access of any Dante network digital audio, which can be converted into analog audio signal output, and can be connected to traditional analog audio devices such as mixer, power amplifier, processor and so on. The device uses high quality AD/DA signal conversion chip, provides 48 V of phantom power supply, and can access higher quality capacitive microphone.
· Compact design, easy to use, supports hot-plug;
· Easily and freely convert between analog audio signal and DanteTM digital audio signal;
· Built-in 2 input or 2 output audio channels;
· Extends audio, control, Ethernet, and power over a single affordable network cable.
· Replaces multiple analog or multi-core cables with only a network cable, cost-effective, versatile;
· Extends uncompressed high-quality audio signal with near-zero latency;
· Transmits high quality 2-channel audio safely and reliably;
· Perfectly supports Dante software, the network and audio routing can be easily expanded andreconfigured with just a few mouse clicks;
· DI22/DO22 supports PoE,and conforms to ieee 802.3af line power supply function, DU22 supports USB power supply;
· Built-in lightning & surge protection;
S-Track offers three models of adpaters:
Features:
· High-performance ADI DSP processor, high-fidelity and low-noise 24-bit A / D and D / A conversion;
· Built-in Dante network transmission module, support 4 Dante signals / 4 analog signal inputs, 4 sets of digital power amplification output;
· With limited amplitude, frequency division, delay, PEQ, mute, inversion, gain adjustment, level indication functions, etc .;
· Multiple sets of scene save, recall, import and export functions;
· USB / network control interface, it can realize PC control for parameter configuration, scene recall and save;
· 3.97-inch color TFT resistive touch screen, Chinese and English menu operation, more comprehensive and intuitive display content
· Switch protection against shock, overcurrent, overheating, temperature detection after overheating protection, short circuit, DC protection;
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
Activation instructions:
