Cart
← Back to Product Catalog

S-Track – DACO 1616

I/O Interfaces

More details

Similar Products

pnaid081a
  • Profitt

Profitt – PN-AID-081

Blocks are designed for:

connecting analog or digital AES3 audio signals to sound studios and audio mixers using the AES67 or Dante protocol;

transmission of audio signals over Ethernet 100/1000 BaseT;

performing the function of an 8x8 audio switch and creating a distributed network of switches with a common switching field, limited network bandwidth (one audio channel takes about 1 Mbps).

Supports up to 16 channels of balanced analog audio (8 inputs and 8 outputs) or up to 8 channels of AES 3

digital audio (4 inputs and 4 outputs). The type of audio signals (' xxxx ') for inputs and outputs is selected by the user in the device code independently of each other. The first pair of ' xx ' defines the input signals and the second pair of ' xx ' the output signals (' A ' indicates 2 analog stereo signals; ' E ' indicates 2 AES digital signals ). An additional Ethernet port provides connection to a redundant ( Redundant )) audio transmission networks or device cascading. Management and monitoring is carried out over an Ethernet network using a proprietary program Dante Controller . HDB44 audio connectors.

    I/O Interfaces
See the product
avn-ai16-iso-square
  • Sonifex

Sonifex – AVN-AI16 16 Input Dante® Interface, PoE

The AVN-AI16 audio converter and interface converts up to sixteen analogue inputs to the Dante Audio-over-IP networking standard. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).

All analogue inputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.

    I/O Interfaces
  • Dante Ch: 0x16
  • 16-bit, 24-bit, 32-bit
See the product
Burl_B2_DAC_Dante_Front
  • Burl Audio

Burl – B2 Bomber DAC

THE B2 BOMBER DIGITAL / ANALOG CONVERTER The B2 Bomber DAC is the result of tireless digital to analog research and development. As a result the B2 DAC features unique class-A, discrete op-amps with passive filtering. This makes the B2 DAC ideal for monitoring. Couple this with state of the art conversion technology and the B2 Bomber DAC delivers sonic purity and dynamics thus far unheard of. Features: • 44.1k Hz to 192k Hz, 24 bit, 2 channel DAC • Proprietary custom design BOPA1, all discrete op-amps • Passive filters • All class-A • Zero capacitor signal path • Audiophile quality 6 position attenuator with standard headroom settings • High definition metering with simultaneous RMS and peak indication • Dante, 2 AES, SPDIF and Toslink input • BNC word clock input with two outputs of extremely low jitter clock • Frequency response at 48kHz sample rate is 10Hz to 22kHz, +/- 0.1dB • Frequency response at 96kHz sample rate is 10Hz to 30kHz, +/- 0.1dB, -0.3 dB @ 40kHz • Frequency response at 192kHz sample rate is 10Hz to 30kHz, +/- 0.1dB, -1.5 dB @ 90kHz • 115dB Dynamic Range • -96 dB THD+N, full scale output = +18dBu • Rugged, Made in USA design • Check with dealers for pricing
    I/O Interfaces
See the product