Cart
← Back to Product Catalog

S-Track – Ostrich D88

I/O Interfaces

More details

Similar Products

TASCAM_-_AE-4D
  • TASCAM

TASCAM – AE-4D

The AE-4D is a compact converter that mutually converts AES/EBU signals and 4-channel Dante signals. With half the size of a standard 1U rack, the AE-4D is suitable for different Dante systems as an exquisite AES/EBU input/output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. AE-4D supports up to 96kHz/24bit and uses XLR connectors for AES/EBU output. The AE-4D is a compact converter that mutually converts AES/EBU signals and 4-channel Dante signals. With half the size of a standard 1U rack, the AE-4D is suitable for different Dante systems as an exquisite AES/EBU input/output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. AE-4D supports up to 96kHz/24bit and uses XLR connectors for AES/EBU output. The AE-4D is a simple converter that converts 4-channel AES/EBU input signals into 4-channel Dante output signals, or 4-channel Dante input signals into 4-channel AES/EBU input signals.  
    I/O Interfaces
See the product
clockaudio-cdt-100_600px
  • Clockaudio

Clockaudio – CDT 100

The Clockaudio Dante Transporter is an advanced professional Dante communication product which combines audio and control transport using network based Dante protocol. By taking advantage of the advanced Dante technology and based on the high performance and pre-configurable hardware platform, this product transfers audio and control signals via widely used Ethernet and is able to guarantee perfect sound quality. The CDT 100 has a variety of uses including but not limited to boardrooms, conference rooms, video conference rooms and any place else where multiple table microphones and control devices are connected back to the AV equipment cabinet. Features
  • Easy to install with under table mounting
  • Audio and control signals transported over Dante
  • 4 audio inputs, multiple units may be daisy chained (maximum of 6 units on a single CAT-5)
  • Provides Phantom Power for each mic input
  • 4 control inputs compatible with all Clockaudio devices including:
    • direct connection to CH32 LItetouch switch & LED, TS001, Retracta CRM202S-RF, CS-S Series, SM80S, S80S
    • direct connection to ARM-C controller
  • Open API for interfacing with Control Systems
  • Compatible with any Dante capable audio DSP
    I/O Interfaces
See the product
lynx-aurora-n-24_1200px|lynx-aurora-n-24_1200px
  • Lynx Studio Technology

Lynx Studio Technology – Aurora (n) 24-DNT

The Aurora (n) 24-DNT provides you with pro-quality digital conversion and ultra-low-latency performance. The Aurora (n) 24-DNT provides you with pro-quality digital conversion and ultra-low-latency performance. The Aurora (n) 24-DNT gives you up to 192kHz analog to digital and digital to analog conversion with front panel control of all routing and sample rate options. Word clock and MIDI I/O connectors provide you with additional sync options, and the preinstalled LT-DNT Dante card gives you maximum networking bandwidth, with minimal latency. Aurora (n) models give you up to 32-channel recording and playback to microSD for stand-alone operation or confidence recording, as well as two audiophile-grade headphone outs, while a TFT LCD display provides immediate status information. Leveraging high-end Lynx Hilo technology and utilizing cutting-edge FPGA processors, Aurora (n) delivers even greater transparency, with significantly lower noise and distortion than previous models.
    I/O Interfaces
See the product