Cart
← Back to Product Catalog

IPD-TSB2.0 STNet Dante-Enabled Soundbar

Speakers

Learn more

Similar Products

VEXO112-B-W
  • AUDAC

AUDAC – VEXO112A

The VEXO series are compact high performance 2-way active loudspeakers and come in 3 different models, each of them with different sizes and performances meeting the requirements of every application. The VEXO series loudspeakers consist of active and passive versions. The low-frequency transducer, which is made out of high-quality materials, is combined with a 1.7” voice coil compression driver, enabling high sound pressure levels and a tight driver response with a rotatable 90° x 70° coverage pattern for a wide range of applications. Thanks to the unique driver composition, the VEXO112 delivers a clear and natural sound with an RMS power of 400 Watts and a maximum power of 1600 Watt. The frequency response (±3dB) starts from 58Hz up to 20 kHz and the sensitivity (1W/1m) reaches 99 dB while a maximum continuous sound pressure level from 125 dB can be achieved
    Speakers
See the product
soundtube-rs82ez
  • SoundTube

SoundTube – IPD-RS82-EZ

The IPD-RS82-EZ is an 8" open-ceiling speaker. The IPD-RS82-EZ is an 8" open-ceiling speaker. Dante®-addressable coaxial pendant speaker incorporates ne 203 mm (8.0 in.) coaxial driver with BroadBeam Ring™ technology for consistently smooth high frequency. Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Includes hanging hardware with galvanized steel cables and hanging bracket for fast, easy and secure installation. Unit may be hung or mounted direct-to-conduit via locking cover plate. 
    Speakers
See the product
tannoy-qflex-16ls_600px_0|tannoy-qflex-16ls_600px_0
  • Tannoy

Tannoy – QFlex 16LS

The new QFlex 16LS column loudspeaker is designed primarily for large transportation hubs as part of a PA/VA system where speech is the main audio source, either from live announcements or via pre-recorded message. The new QFlex 16LS column loudspeaker is designed primarily for large transportation hubs as part of a PA/VA system where speech is the main audio source, either from live announcements or via pre-recorded message. These new QFlex life safety models are specifically intended to optimise voice reinforcement, and as a result make them more affordable, and therefore applicable, to a wider range of projects.  The QFlex 16LS makes use of a fewer number of wider bandwidth 4-inch low frequency drivers than the equivalently sized QFlex 40 model to achieve an emphasis on the speech band only, over an effective distance of up to 70 metres. Each of the 16 drivers is controlled by its own discrete channel of 100 Watt (RMS) Class D amplification and cutting edge DSP, the reduced driver count and wider spacing enabling a 50% reduction in power consumption. The QFlex 16LS provides a beam steering range of ±40 degrees with effective low frequency control down to 230 Hz. Dispersion is nominally 120 degrees horizontal and a vertical range of between 5 degrees and 100 degrees, either symmetrical or asymmetrical.
    Speakers
See the product