The SoundTube Entertainment MCA10004t multichannel amplifier is Dante enabled, and allows for fixed resistance and fixed voltage output modes. At 4 ohms, this amplifier offers 1000W respectively per channel. The 4.3” LCD touchscreen on the front panel allows for easy access to gain controls, input matrixing, as well as output mode selection. The included software, STNet MCA Control, provides the user with complete control over the amplifier. This software enables the user to monitor the real-time status of the amplifier, and set up various DSP functions in real time. These DSP features include functions such as compressor, limiter, noise gate, parametric equalization, matrix router, delay, and more!
The SoundTube Entertainment MCA7004t multichannel amplifier is Dante enabled, and allows for fixed resistance and fixed voltage output modes. At 4 ohms, this amplifier offers 700W respectively per channel. The 4.3” LCD touchscreen on the front panel allows for easy access to gain controls, input matrixing, as well as output mode selection. The included software, STNet MCA Control, provides the user with complete control over the amplifier. This software enables the user to monitor the real-time status of the amplifier, and set up various DSP functions in real time. These DSP features include functions such as compressor, limiter, noise gate, parametric equalization, matrix router, delay, and more!
An ultra-thin 2-way Dante-enabled digital end-point solution in a soundbar configuration. Measuring only 1.5 inches thick where the bar meets the TV, the soundbar incorporates a right and left speaker with four 3-inch polypropylene woofers with NBR surrounds, four bass radiators, and two 0.75-inch synthetic soft dome tweeters.
The SoundTube DSM-16 is a full featured system manager for Dante end point-end point distributed audio systems. It is part of the SoundTube Dante ecosystem It is designed to bridge the gap between conventional distributed audio system and enterprise systems using powerful DSP’s. It incorporates features needed for applications ranging from small installed systems to large sophisticated installations. The DSM’s embedded web server has three levels of control and setup. The installer UI allows full access to all the functionality of the DSM, the zone user level allows for source selection and volume control while the admin has access to all zone source selection and levels.
Engineered for applications with limited plenum space. Incorporates a SoundTube-specific shallow backcan with an installed depth of 3.5 inches. One 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 65 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 84.5 dB sensitivity, 16 ohm impedance. Incorporates a painted steel grille for lasting durability. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 1480 and 2043 listed.
Offering an economical option for expansion of audio coverage in a digital speaker system, this Dante®-enabled coaxial in-ceiling speaker has output terminals for connection and power of up to three additional standard CM62-BGM speakers. The speaker incorporates one 6.5 inch (165 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. BroadBeam Ring™ technology and a tuned port on the baffle provide smooth off-axis performance, mid-range clarity and bass response to 60 Hz (-10 dB). Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. When combined with standard speakers, the four-speaker cluster can be split and configured to handle two separate channels of audio. Mounting hardware is included and features SoundTube®'s SpeedWing™ constant-tension fixed-wing mounting system, which accommodates material thicknesses ranging from 0.035 in (0.9 mm) to 2.38 in (60.4mm). UL 60065 and 2043 listed. Color-coded (green) tile bridge, UL listed conduit clamp and paint shield are included.
One 8.0 inch (203 mm) polypropylene woofer with butyl rubber surround and one 1.0 inch (25 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 55 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 86.0 dB sensitivity, 16 ohm impedance. Incorporates a painted steel magnetic seamless grille for lasting durability and refined aesthetics. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 1480 and 2043 listed.
One 5.25 inch (134 mm) polypropylene woofer with rubber surround and one 0.75 inch (19 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 65 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 84.5 dB sensitivity, 16 ohm impedance. Incorporates a painted steel grille for lasting durability. Adaptable to material thicknesses ranging from 0.035 in. (0.9 mm) to 1.6 in. (40.6 mm). UL 1480 and 2043 listed.
One 6.5 inch (165 mm) polypropylene woofer with rubber surround and one 1.0 inch (25.4 mm) silk dome tweeter. BroadBeam Ring™ technology for mid-range clarity and smooth off axis performance. Easy-access six-position tap switch for 25/70.7/100-volt and transformer bypass settings allows for easy ordering, stocking and installation. Tuned port on baffle for added musicality and bass response down to 64 Hz (-10 dB). Reduced amplification costs and maximum efficiency of 85.0 dB sensitivity, 16 ohm impedance. Incorporates a painted steel magnetic seamless grille for lasting durability and refined aesthetics. Adaptable to material thicknesses ranging from 0.035 inch (0.9 mm) to 1.6 inch (40.6 mm). UL 1480, UL 2043 and EN54-24 listed.
SoundTube's new IPD Hub 2 Extender Box for adding onto a Hub 2 local system. Connect up to 5 IPD Hub 2 amplifiers to an extender box. The IPD Hub 2 utilizes a Dante infrastructure for flexible audio distribution. The amp is complete with local and Dante inputs and local and network control to address requirements for commercial audio connectivity in numerous scalable systems such as retail, bar, restaurants, hospitality, spas, education facilities, and more.
Rack mountable 16-port 40w PoE audio quality switch designed for use in Dante Networks. In addition to the 16 Ethernet ports, the STNet-Switch II includes two SFP ports that can be adapted to fiber or high speed Ethernet connections. The two SFP ports can be turned into a high speed optical fiber ports or copper Ethernet ports with the addition of a Gigabit SFP transceiver module.
SoundTube Entertainment’s IPD-Hub 2 Amplifier creates an IP-based audio distribution alternative to traditional 70v or 100v audio systems. Designed for small to medium applications, the IPD-Hub 2 combines Attero Tech Axiom endpoints with Dante infrastructure to create a complete IP-based system at a comparable price point to traditional 70v or 100v systems. The IPD-Hub 2 features two-channel DSP amplification with a multitude of power options, including PoE, PoE+, 40W PoE and 24v PS.
The IPD-XT850 is a premium 2-way outdoor loudspeaker solution for IP-addressable audio networks on the Dante® platform.
The IPD-XT850 is a premium 2-way outdoor loudspeaker solution for IP-addressable audio networks on the Dante® platform. This speaker is Dante addressable and includes a 40W PoE amplifier for simplified installation and set up. The IPD-XT850 is designed for full-range back-ground/fore-ground music and paging. The sealed, in-ground enclosure design delivers true low end response (38 Hz, – 10 dB) and optimal off axis performance. The system is IP55 approved and AES67 compatible. Included accessories: anti-theft brackets, water-tight strain relief.
The IPD-SM52-EZ-II is a Dante-enabled, digital end-point solution in a surface-mount loudspeaker.
The IPD-SM52-EZ-II is a Dante-enabled, digital end-point solution in a surface-mount loudspeaker. This speaker is Dante addressable and includes a 40W PoE amplifier for simplified installation and set up. Driver components consists of one 5.25 inch polypropylene woofer and one 1.0 inch soft dome tweeter in a ported enclosure. The included pre-mountable surface-mount bracket allows for quick and easy installation and the powder-coated aluminum grille keep the speaker looking good in most environments. The system is UL 60065 approved. Included accessories: Safety cable, wall mount bracket, conduit connector and optional port plug.
The IPD-SM82-EZ-II is a Dante-enabled, digital endpoint solution in a surfacemount loudspeaker.
The IPD-SM82-EZ-II is a Dante-enabled, digital endpoint solution in a surfacemount loudspeaker. This speaker is Dante addressable and includes a 40W PoE amplifier for simplified installation and set up. Driver components consists of one 8.0 inch polypropylene woofer and one 1.0 inch soft dome tweeter in a ported enclosure. The included premountable surface-mount bracket allows for quick and easy installation and the powder-coated aluminum grille keep the speaker looking good in most environments. The system is UL 60065 approved. Included accessories: Safety cable, wall mount bracket, conduit connector and optional port plug.
The IPD-HP82-EZ is an 8" open-ceiling speaker.
The IPD-HP82-EZ is an 8" open-ceiling speaker. Dante®-addressable coaxial pendant speaker incorporates one 8.0 inch (203 mm) high power coaxial driver with BroadBeamHP™ compression driver technology for long throw and smooth directivity. Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Includes hanging hardware with galvanized steel cables and hanging bracket for fast, easy and secure installation. Unit may be hung or mounted direct-to-conduit via locking cover plate. Enclosure constructed of injection molded ABS with glasber reinforcement for lasting durability in indoor or outdoor applications. Aluminum grille with protective powder coated finish.
The IPD-RS62-EZ is a 6.5" open-ceiling speaker.
The IPD-RS82-EZ is a 6.5" open-ceiling speaker. Dante®-addressable coaxial pendant speaker incorporates one 6.5 inch (165 mm) coaxial driver with BroadBeam Ring™ technology for consistently smooth high frequency. Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Includes hanging hardware with galvanized steel cables and hanging bracket for fast, easy and secure installation. Unit may be hung or mounted direct-to-conduit via locking cover plate. Enclosure constructed of injection molded ABS with glasber reinforcement for lasting durability in indoor or outdoor applications.
The IPD-RS82-EZ is an 8" open-ceiling speaker.
The IPD-RS82-EZ is an 8" open-ceiling speaker. Dante®-addressable coaxial pendant speaker incorporates ne 203 mm (8.0 in.) coaxial driver with BroadBeam Ring™ technology for consistently smooth high frequency. Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Includes hanging hardware with galvanized steel cables and hanging bracket for fast, easy and secure installation. Unit may be hung or mounted direct-to-conduit via locking cover plate.
The IPD-CM52-BGM is a 5.25-inch (134 mm) in-ceiling speaker with 0.75-inch (19 mm) silk dome tweeter, ported, with a steel backcan.
The IPD-CM52-BGM is an in-ceiling ported speaker for music and paging. It incorporates a 5.25-inch (134 mm) polypropylene woofer with rubber surround and 0.75-inch (19 mm) silk dome tweeter, bi-amped, with DSP and Dante for audio distribution and report-back on speaker condition. SoundTube's proprietary BroadBeam Ring technology ensures broad dispersion of high frequencies. The speaker is enclosed in a drawn steel backcan with SoundTube's exclusive SpeedWing quick-mounting system, and incorporates a paintable steel grille. A color-coded tile bridge, UL listed conduit clamp and paint shield are included with each speaker.
The IPD-CM52-BGM is a 5.25-inch (134 mm) in-ceiling speaker with 0.75-inch (19 mm) silk dome tweeter, ported, with a shallow steel backcan that allows placement in narrow spaces.
The IPD-CM52-BGM is an in-ceiling ported speaker for music and paging. It incorporates a 5.25-inch (134 mm) polypropylene woofer with rubber surround and 0.75-inch (19 mm) silk dome tweeter, bi-amped, with DSP and Dante for audio distribution and report-back on speaker condition. SoundTube's proprietary BroadBeam Ring technology ensures broad dispersion of high frequencies. The speaker is enclosed in a shallow-depth drawn steel backcan with SoundTube's exclusive SpeedWing quick-mounting system, and incorporates a paintable steel grille. A color-coded tile bridge, UL listed conduit clamp and paint shield are included with each speaker.
The IPD-CM62-BGM is a 6.5-inch (165 mm) in-ceiling speaker with 1-inch (25.4 mm) silk dome tweeter, ported, with a steel backcan.
The IPD-CM62-BGM is an in-ceiling ported speaker for music and paging. It incorporates a 6.5-inch (165 mm) polypropylene woofer with rubber surround and 1-inch (25.4 mm) silk dome tweeter, bi-amped, with DSP and Dante for audio distribution and report-back on speaker condition. SoundTube's proprietary BroadBeam Ring technology ensures broad dispersion of high frequencies. The speaker is enclosed in a drawn steel backcan with SoundTube's exclusive SpeedWing quick-mounting system, and incorporates a paintable steel grille. A color-coded tile bridge, UL listed conduit clamp and paint shield are included with each speaker. The IPD-CM62-BGM is UL 60065 and UL2043 listed.
The IPD-CM82-BGM is a 8-inch (203 mm) in-ceiling speaker with 1-inch (25 mm) silk dome tweeter, ported, with a steel backcan.
The IPD-CM82-BGM is an in-ceiling ported speaker for music and paging. It incorporates an 8-inch (203 mm) polypropylene woofer with rubber surround and 1-inch (25 mm) silk dome tweeter, bi-amped, with DSP and Dante for audio distribution and report-back on speaker condition. SoundTube's proprietary BroadBeam Ring technology ensures broad dispersion of high frequencies. The speaker is enclosed in a drawn steel backcan with SoundTube's exclusive SpeedWing quick-mounting system, and incorporates a paintable steel grille. A color-coded tile bridge, UL listed conduit clamp and paint shield are included with each speaker. The IPD-CM82-BGM is UL 60065 and 2043 listed.
The IPD-SM500i-II is a 5.25-inch coaxial surface-mount speaker with BroadBeam waveguide technology, biamplified.
The IPD-SM500i-II incorporates a 5.25-inch (133 mm) polypropylene woofer and 1-inch (25 mm) convex titanium tweeter, with SoundTube's patented BroadBeam waveguide technology for broad, even dispersion of high frequencies. The speaker enclosure is constructed of injection-molded, glass-reinforced ABS with a powder-coated aluminum grille and features SoundTube's proprietary Stealth mounting system that allows for tool-free horizontal and vertical aiming, while keeping the speaker close to the wall. A safety cable with speaker mounting bolt, Euroblock connector, wall mount bracket and terminal weather boot are included with each speaker. This 40-watt bi-amplified speaker includes DSP and Dante for audio distribution and report-back on speaker condition.
The IPD4-CM52-BGM is a 5.25-inch in-ceiling Dante speaker that includes connection for up to three additional non-Dante SoundTube speakers.
The IPD4-CM52-BGM gives integrators an economical way to expand in-ceiling speaker zones on a Dante network. This speaker incorporates a 5.25-inch (134 mm) polypropylene woofer with rubber surround and 0.75-inch (19 mm) silk dome tweeter in a ported steel backcan. In addition to its PoE connection to the SoundTube STNet Switch, the IPD4-CM52-BGM can power up to three additional non-IP speakers. Each IPD4 speaker can be broken down into 2 channels; IPD4 speakers are matched in a system with standard passive SoundTube speakers of the same type. All IPD4 speakers come in both an active and a passive version.
As with SoundTube's other IPD in-ceiling speakers, IPD4 speakers feature BroadBeam Ring technology for broad, even dispersion of high frequencies and include SoundTube's exclusive SpeedWing quick-mounting technology.
The IPD4-CM62-BGM is a 6.5-inch in-ceiling Dante speaker with connection and power for up to three additional non-Dante SoundTube speakers.
The IPD4-CM62-BGM gives integrators an economical way to expand in-ceiling speaker zones on a Dante network. This speaker incorporates a 6.5-inch (165 mm) polypropylene woofer with rubber surround and 1-inch (25 mm) silk dome tweeter in a ported steel backcan. In addition to its PoE connection to the SoundTube STNet Switch, the IPD4-CM62-BGM can power up to three additional non-IP speakers. Each IPD4 speaker can be broken down into 2 channels; IPD4 speakers are matched in a system with standard passive SoundTube speakers of the same type. All IPD4 speakers come in both an active and a passive version.
As with SoundTube's other IPD in-ceiling speakers, IPD4 speakers feature BroadBeam Ring technology for broad, even dispersion of high frequencies and include SoundTube's exclusive SpeedWing quick-mounting technology.
Rack-mountable 16-port 40W PoE switch for use with SoundTube's Dante-enabled in-ceiling and surface-mount speakers.
The STNet-Switch is a 16-port, 40 watt PoE switch designed for use with SoundTube's Dante-enabled speakers. (The speakers may also be used with a standard PoE or PoE Plus switch.) The STNet-Switch provides 40 watts Power over Ethernet to each SoundTube speaker on the network and manages report-back information from the speakers. A Dante system controller DSP is connected to the STNet-Switch via one of the two provided gigabit Ethernet ports; up to 16 speakers may be connected directly via one switch. Multiple switches may be linked via the second gigabit Ethernet port
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
