Cart
← Back to Product Catalog

MCA7004t

Amplifiers

More Details

Similar Products

audac-SMA350
  • AUDAC

AUDAC – SMA350

The AUDAC SMA350 is a two channel Class-D power amplifier with an output power of 2 x 350 Watt. The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration. Using the optional ANI22 network interface module, connection to any DANTE-powered AV network is made possible; allowing flawless incorporation between hundreds of DANTE enabled products available in the market.
    Amplifiers
  • Dante Ch: 4x4
  • 24-bit
See the product
ashly-nXe-8002_600px|ashly-nXe-8002_600px
  • Ashly Audio

Ashly – nXe8002bd

The nXe8002bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 800W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
See the product
xta-DPA100_0
  • XTA

XTA – DPA40

Combining new technology power amplification with the highest definition XTA DSP, the DPA Series take audio performance and convenience to a whole new level.  Combining new technology power amplification with the highest definition XTA DSP, the DPA Series take audio performance and convenience to a whole new level. Powerful processing features such as FIR filtering and Dante Networking work alongside unique enhancements including 4 local + 4 aux DSP channels (also supplied to the network), meaning a single DPA amplifier can control a stereo 4-way system with no external processing and supply audio to a Non-DSP amplifier either via analogue or a single Cat5 cable.  Control via new AudioCore with advanced grouping architecture, or go wireless with our bespoke iPad app DeltaDirect. Configure and tune using a fast, powerful combination of AudioCore (XTA’s fast efficient control software platform) and DeltaDirect, the bespoke iPad app. Every aspect of a network of amplifiers can be controlled and monitored wirelessly. Direct Ethernet, USB, and RS485 control options plus configurable GPIO offer unparalleled remote 
control flexibility.
    Amplifiers
  • Dante Ch: 4x4
  • 24-bit
See the product