Cart
← Back to Product Catalog

CL-6D

Speakers

More Details

Similar Products

alm16-4
  • Aimline

Aimline – ALM 16.4

The new ALM series transmits clear intelligible live announcements and precise messages. Thanks to the digitally controllable directional effect, the entire frequency spectrum can be heard in the desired sound coverage area. The combination of a long range and a wide horizontal opening angle has the advantage that just a few ALM loudspeakers cover a large area. Therefore, the ALM loudspeakers are particularly suitable for installations where a high level of speech intelligibility is required, for example in lecture halls, places of worship, airport terminals or shopping center. The ALM series is also equipped with a 24 volt power supply and is compatible with an EN 54 certifie emergency power supply system.

Configuring line array speakers has never been easier

Because of it´s modular structure of up to three lengths, the ALM series is easy to install. The automatic detection of your own IP address in the PAN C software accelerates the configuration process. The intuitive and uncomplicated PAN C software makes the configuration of line array speakers easier than ever. The software calculates the adjustable sound alignment as well as all internal parameters in real time.

Each ALM loudspeaker is designed as a real two-way system and has vertically arranged broadband loudspeakers for the low and mid-range as well as 4 tweeters for a silky, brilliant reproduction of the high-frequency range. Each individual loudspeaker is powered and controlled by a separate power amplifier and DSP channel. Using a complex computational algorithm in the DSP units, the vertical dispersion can be continuously controlled in the range between 5° – 40°. The desired range (focus distance) can also be adjusted continously.

Two analog channels, two DANTE® channels plus a 100 V input are available as inputs. The input DSP offers an adjustable limiter, a gate, delay function and a 10-band parametric Equalizer with IIR filters for each input. Due to the discrete visual design and the appealing housing the ALM series can be easily integrated into architecturally demanding environments. The variable sound dispersion makes difficult acoustic situations easy to handle and can be installed just with little effort.

    Speakers
See the product
CS8D
  • DMIX

DMIX – CS-8D

Dante Network Transmission

Dante is used for audio transmission to achieve digital and network transmission management. Dante is based on layer 3 IP network technology and adopts Zeroconf protocol to simplify the network operation mode. It can realize long-distance transmission of two-way high-quality big data and perfect synchronous playback with low delay. The device is plug and play, system construction has no topology limitation, installation and configuration is convenient, and wiring is simple and easy.

PoE power supply

Ethernet power supply and audio and data transmission are integrated, simplifying cable layout and meeting Ethernet engineering specifications. PoE network cabling uses 50V dc power supply for bearing Ethernet cables, without restrictions on high-voltage ac cabling, and better meets site safety and fire prevention specifications.

Technical parameters：

Speaker model: CS-8D

Unit configuration: 8"(200mm) Speaker unit，1" Tweeter

Frequency range: 100Hz-18kHz

Rated power: 60W

Sound pressure level: 112dB

Sensitivity: 93dB

Coverage Angle: 100°×100°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Product size (mm) : 281×247(Ф×H)

Opening size (mm) : Ф245

    Speakers
See the product
MLA210a
  • DMIX

DMIX – MLA 210a

Speaker model: MLA 210a

Speaker type: Dual 10 "two frequency active line array loudspeakers

Unit configuration: LF: 2×10" woofer 2.5"(65mm）Voice coil

HF: 1×3"(75mm) Voice coil high frequency driver

Frequency response: 55Hz-20kHz (-10dB)

Rated power: LF: 600W , HF: 90W

Sensitivity: LF: 99dB , HF: 110dB

Sound pressure level： 136dB (peak)

Radiation Angle: 100°×10° (adjustable)

Crossover point: DSP control

Size (mm) : 740×294×547 (W×H×D)

Module amplifier power: HF：300W，LF：1000W (Class D)/8Ω

Module input link: 2 balanced XLR inputs or 2 AES inputs or a set of Dante signal inputs and outputs

Module DSP control: RS485、USB or Dante

    Speakers
See the product