Pan Acoustics – PB 08-D PoE


More details

Similar Products

CX115P
  • DMIX

DMIX – CX115P

Speaker model: CX115P

Speaker type: 15”Active coaxial loudspeaker

Unit configuration: LF:15" unit 2.5"(65mm)Voice coil

HF:1.7"(44mm)Voice coil driver

Frequency response: 65Hz-19kHz(-10dB)

Rated power: LF:350W, HF:50W

Sensitivity: LF:98dB, HF:109dB

Sound pressure level: 131dB (peak)

Radiation Angle: 60°×60°

Crossover point: DSP control

Size (mm) : 632×423×392 (W×H×D)

Module amplifier power: HF:150W,LF:500W (Class D)

Module input link: 1 balanced XLR input / 1 set of Dante signal input and output / 1 set of LINK output

Module DSP control: RS485、USB or Dante

    Speakers
CA-412DA
  • DMIX

DMIX – CA-412DA

Technical parameters:

Speaker model: CA-412DA

Speaker type: Active Speaker

Unit composition: 12×4" Full frequency unit

Frequency response: 90Hz-17kHz (-10dB)

Sensitivity: 98dB

Rated impedance: 6Ω

Sound pressure level: 130dB(peak)

Rated power: 360W

Horizontal coverage Angle: 100°x30°-40°,Electronic control

    Speakers
Wei_Xin_Tu_Pian_20210621164520
  • Lucky Tone

Lucky Tone – DANTE 860DUO POE DSP

Dante PoE Speaker can realize its multifunction of the POE power supply, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.

    Speakers