Dante-enabled Product Catalog

The new ALM series transmits clear intelligible live announcements and precise messages. Thanks to the digitally controllable directional effect, the entire frequency spectrum can be heard in the desired sound coverage area. The combination of a long range and a wide horizontal opening angle has the advantage that just a few ALM loudspeakers cover a large area. Therefore, the ALM loudspeakers are particularly suitable for installations where a high level of speech intelligibility is required, for example in lecture halls, places of worship, airport terminals or shopping center. The ALM series is also equipped with a 24 volt power supply and is compatible with an EN 54 certifie emergency power supply system.

Configuring line array speakers has never been easier

Because of it´s modular structure of up to three lengths, the ALM series is easy to install. The automatic detection of your own IP address in the PAN C software accelerates the configuration process. The intuitive and uncomplicated PAN C software makes the configuration of line array speakers easier than ever. The software calculates the adjustable sound alignment as well as all internal parameters in real time.

Each ALM loudspeaker is designed as a real two-way system and has vertically arranged broadband loudspeakers for the low and mid-range as well as 4 tweeters for a silky, brilliant reproduction of the high-frequency range. Each individual loudspeaker is powered and controlled by a separate power amplifier and DSP channel. Using a complex computational algorithm in the DSP units, the vertical dispersion can be continuously controlled in the range between 5° – 40°. The desired range (focus distance) can also be adjusted continously.

Two analog channels, two DANTE® channels plus a 100 V input are available as inputs. The input DSP offers an adjustable limiter, a gate, delay function and a 10-band parametric Equalizer with IIR filters for each input. Due to the discrete visual design and the appealing housing the ALM series can be easily integrated into architecturally demanding environments. The variable sound dispersion makes difficult acoustic situations easy to handle and can be installed just with little effort.

Speaker model: CX112P

Speaker type: 12”Active coaxial loudspeaker

Unit configuration: LF：12" unit 2.5"(65mm）Voice coil

HF：1.7"（44mm）Voice coil driver

Frequency response: 70Hz-17kHz(-10dB)

Rated power: LF：250W， HF：50W

Sensitivity: LF：101dB， HF：109dB

Sound pressure level： 131dB (peak)

Radiation Angle: 60°×60°

Crossover point: DSP control

Size (mm) : 583×376×377 (W×H×D)

Module amplifier power: HF：150W，LF：500W (Class D)

Module input link: 1 balanced XLR input / 1 set of Dante signal input and output / 1 set of LINK output

Module DSP control: RS485、USB or Dante

Technical parameters：

Speaker model: CNET12D

Speaker type: 12" Active two-division loudspeaker

Unit configuration: 12"(300mm) woofer 1.75"(44mm) Treble driver

Frequency response: 65Hz-19kHz

Rated power: 300W

Sound pressure level: 129dB

Sensitivity: 98dB

Rated impedance: 8Ω

Directivity (H×V) : 80°×50°

Dante Digital network interface: 2×RJ45 interface

Analog interface: 1×XLR Balanced input，1×XLR Balanced output

Active power amplifier module: 600W

Volume knob control: Yes

Central control interface: RS232

Size (mm) : 385×571×365 (W×H×D)

Speaker model: CX110P

Speaker type: 10”Active coaxial loudspeaker

Unit configuration: LF: 10" unit 2"(50mm）Voice coil

HF: 1.7"（44mm）Voice coil driver

Frequency response: 75Hz-17kHz(-10dB)

Rated power: LF: 160W， HF: 40W

Sensitivity: LF: 95dB， HF: 105dB

Sound pressure level： 124dB (peak)

Radiation Angle: 90°×90°

Crossover point: DSP control

Size (mm) : 480×332×340 (W×H×D)

Module amplifier power: HF：100W，LF：500W (Class D)

Module input link: 1 balanced XLR input / 1 set of Dante signal input and output / 1 set of LINK output

Module DSP control: RS485、USB 或 Dante

Technical parameters：

Speaker model: CNET10D

Speaker type: 10" Active two-division loudspeaker

Unit configuration: 10"(250mm) woofer 1.5"(34mm) Treble driver

Frequency response: 70Hz-20kHz

Rated power: 120W

Sound pressure level: 116dB

Sensitivity: 90dB

Rated impedance: 8Ω

Directivity (H×V) : 80°×70°

Dante Digital network interface: 2×RJ45 interface

Analog interface: 1×XLR Balanced input，1×XLR Balanced output

Active power amplifier module: 200W

Volume knob control: Yes

Central control interface: RS232

Size (mm) : 308×480×290 (W×H×D)

Speaker model: CX108P

Speaker type: 8”Active coaxial loudspeaker

Unit configuration: LF: 8" unit 2"(50mm）Voice coil

HF: 1.7"（44mm）Voice coil driver

Frequency response: 80Hz-20kHz(-10dB)

Rated power: LF: 140W， HF: 40W

Sensitivity: LF: 95dB， HF: 105dB

Sound pressure level： 121dB (peak)

Radiation Angle: 90°×90°

Crossover point: DSP control

Size (mm) : 344×270×256 (W×H×D)

Module amplifier power: HF：100W，LF：200W (Class D)

Module input link: 1 balanced XLR input / 1 set of Dante signal input and output / 1 set of LINK output

Module DSP control: RS485、USB or Dante

Technical parameters：

Speaker model: CNET8D

Speaker type: 8" Active two-division loudspeaker

Unit configuration: 8"(200mm) woofer 1"(25mm) Treble driver

Frequency response: 80Hz-19kHz

Rated power: 100W

Sound pressure level: 115dB

Sensitivity: 92dB

Rated impedance: 8Ω

Directivity (H×V) : 80°×80°

Dante Digital network interface: 2×RJ45 interface

Analog interface: 1×XLR Balanced input，1×XLR Balanced output

Active power amplifier module: 100W

Volume knob control: Yes

Central control interface: RS232

Size (mm) : 250×391×235 (W×H×D)

Power amplifier:

Rated power (EIAJTHD=1%,1KHZ) ： 8Ω: 1200W+1200W 4 Ω: 1600W+1600W

RMS output voltage (THD=1%,1KHZ)：98V 8 Ω

THD+N (10% power rating) ：<1%

Imd-smpte (10% power rating) ：<0.5%

Frequency response：-0.5dB 1dB 20-20khz

SNR：>95dB >98dB

Power input: 220-240VAC 50/60Hz

Speaker model: GLA 312a

Speaker category: Dual 18 "active bass reflex ULTRA-low frequency speakers

Unit configuration: 2x18"(460mm）woofer

Frequency response: 40Hz-200Hz(-10dB)

Rated power: 2000W

Sensitivity: 99dB

Nominal impedance: 4Ω

Sound pressure level 139dB（peak）

Power amplifier: 1500W+1500W

Size (mm) : 1066x561x798（WxHxD）

Technical parameters：

Speaker model: CNET6D

Speaker type: 6.5" Active two-division loudspeaker

Unit configuration: 6.5"(165mm) woofer 1"(25mm) Treble driver

Frequency response: 100Hz-18kHz

Rated power: 50W

Sound pressure level: 113dB

Sensitivity: 89dB

Rated impedance: 8Ω

Directivity (H×V) : 80°×80°

Dante Digital network interface: 2×RJ45 interface

Analog interface: 1×XLR Balanced input，1×XLR Balanced output

Active power amplifier module: 100W

Power amplifier:

Rated power (EIAJTHD=1%,1KHZ) ： 8Ω: 1200W+1200W 4 Ω: 1600W+1600W

RMS output voltage (THD=1%,1KHZ)：98V 8 Ω

THD+N (10% power rating) ：<1%

Imd-smpte (10% power rating) ：<0.5%

Frequency response：-0.5dB 1dB 20-20khz

SNR：>95dB >98dB

Power input: 220-240VAC 50/60Hz

Speaker model: GLA 312a

Speaker category: Dual 12 "Active triplex array speakers

Unit configuration: HF：3x1.7" Treble driver MF：1x10" MF unit LF：2x12" woofer

Frequency response: 55Hz-20KHz (-10dB)

Rated power: MHF：400W LF：700W

Sensitivity: MHF：105dB LF：102dB

Nominal impedance: MHF：8Ω LF：8Ω

Coverage Angle (H x V) : 120° x 10°，Vertical adjustable

Sound pressure level MHF: 139dB LF: 136dB（peak）

Power amplifier: 1500W+1500W

Size (mm) : 1138x381x645（WxHxD）

Technical parameters：

Speaker model: CA-412DA

Speaker type: Active Speaker

Unit composition: 12×4" Full frequency unit

Frequency response: 90Hz-17kHz （-10dB）

Sensitivity: 98dB

Rated impedance: 6Ω

Sound pressure level: 130dB（peak）

Rated power: 360W

Horizontal coverage Angle: 100°x30°-40°，Electronic control

Speaker model: MLB 118a

Speaker type: 18 "low frequency active line array speaker

Unit configuration: LF: 18" woofer 4"(100mm）Voice coil

Frequency response: 35Hz-200Hz (-10dB)

Rated power: LF: 600W

Sensitivity: LF: 98dB

Sound pressure level： 133dB (peak)

Radiation Angle: DSP control

Crossover point: 740×515×720 (W×H×D)

Size (mm) : 2000W (Class D) 4Ω

Module amplifier power: 2 balanced XLR inputs or 2 AES inputs or a set of Dante signal inputs and outputs

Module input link: RS485、USB or Dante

Technical parameters：

Speaker model: CA-408DA

Speaker type: Active Speaker

Unit composition: 8×4" Full frequency unit

Frequency response: 95Hz-17kHz （-10dB）

Sensitivity: 96dB

Rated impedance: 6Ω

Sound pressure level: 126dB（peak）

Rated power: 240W

Horizontal coverage Angle: 100°x30°-40°，Electronic control

Speaker model: MLA 210a

Speaker type: Dual 10 "two frequency active line array loudspeakers

Unit configuration: LF: 2×10" woofer 2.5"(65mm）Voice coil

HF: 1×3"(75mm) Voice coil high frequency driver

Frequency response: 55Hz-20kHz (-10dB)

Rated power: LF: 600W , HF: 90W

Sensitivity: LF: 99dB , HF: 110dB

Sound pressure level： 136dB (peak)

Radiation Angle: 100°×10° (adjustable)

Crossover point: DSP control

Size (mm) : 740×294×547 (W×H×D)

Module amplifier power: HF：300W，LF：1000W (Class D)/8Ω

Module input link: 2 balanced XLR inputs or 2 AES inputs or a set of Dante signal inputs and outputs

Module DSP control: RS485、USB or Dante

Technical parameters：

Speaker model: CA-404DA

Speaker type: Active Speaker

Unit composition: 4×4" Full frequency unit

Frequency response: 100Hz-17kHz （-10dB）

Sensitivity: 94dB

Rated impedance: 8Ω

Sound pressure level: 124dB（peak）

Rated power: 120W

Horizontal coverage Angle: 100°x30°-40°，Electronic control

Speaker model: MLA 208a

Speaker type: Dual 8 "dichotomous active line array loudspeakers

Unit configuration: LF: 2×8"woofer 2"(50mm) Voice coil

HF: 2×1.4"(34mm) Voice coil high frequency driver

Frequency response: 75Hz-19kHz (-10dB)

Rated power: LF: 300W , HF: 60W

Sensitivity: LF: 98dB , HF: 107dB

Sound pressure level： 130dB (peak)

Radiation Angle: 110°×10° (adjustable)

Crossover point: DSP control

Size (mm) : 740×259×416 (W×H×D)

Module amplifier power: HF：300W，LF：1000W (Class D)/8Ω

Module input link: 2 balanced XLR inputs or 2 AES inputs or a set of Dante signal inputs and outputs

Module DSP control: RS485、USB or Dante

Technical parameters：

Speaker model: CA-312DA

Speaker type: Active Speaker

Unit composition: 12×3" Full frequency unit

Frequency response: 120Hz-19kHz （-10dB）

Sensitivity: 95dB

Rated impedance: 6Ω

Sound pressure level: 127 dB（peak）

Rated power: 240W

Horizontal coverage Angle: 100°x20°-30°，Electronic control

The SLB 118A has a built-in power amplifier with a high-performance digital signal processing system, two full-frequency channel drive systems with two or three SLA 110 single 10-inch line array speakers (preferably two), and one channel drive the SLB 118A. Two balanced line input and one signal output ports, plus one power input and output ports, fully meet the use requirements, but also convenient system expansion. With high performance DSP digital audio signal processor, various scene parameters can be set according to different application requirements and different number of speakers. Through the control software setting and quick key selection, greatly simplifies the system construction process, full frequency channel and ultra low frequency channel can be adjusted independently, can achieve the best effect in a very short time. The SLB 118A uses an efficient class D power amplifier module with a patented L-shaped heat dissipation design combined with an integrated cast aluminum back plate for heat dissipation, resulting in high energy conversion efficiency of up to 2X700W+1800W, compact size and stable performance.

Rich accessory package, including adjustable height support rod, speaker cable, power cord, convenient system quick connection.

Technical parameters：

Speaker model: CA-306DA

Speaker type: Active Speaker

Unit composition: 6×3" Full frequency unit

Frequency response: 130Hz-19kHz （-10dB)

Sensitivity: 95dB

Rated impedance: 12Ω

Sound pressure level: 122dB（peak）

Rated power: 120W

Horizontal coverage Angle: 100°x20°-30°，Electronic control

The SLB 115A is a small active compact line array speaker system designed to achieve high fidelity and ultra high definition amplification in small and medium sized applications. Lightweight and flexible with excellent performance, compact box design and special mounting components make installation easy and quick.

The SLB 115A active Linear array ULTRA-low frequency speaker has a built-in three-channel power amplifier module with a high-performance digital signal processing system. Two full-frequency channels drive the system with three SLA 206, and the remaining channel drives the ULTRA-low frequency SLB 115A. With two balanced line input and one signal output port, plus one power input and output port, fully meet the use requirements, but also convenient system expansion. With the high performance 2 in 3 out DSP digital audio signal processor, various scene parameters can be set according to different application requirements and different number of speakers. Through the control software setting and quick key selection, greatly simplifies the system construction process, full frequency channel and ultra low frequency channel can be adjusted independently, can achieve the best effect in a very short time. The SLB 115A uses a high-efficiency class D power amplifier design, a patented L-shaped heat dissipation design combined with an integrated cast aluminum back plate for heat dissipation, resulting in a high energy conversion efficiency of up to 2x700W+1800W, while being compact and stable in performance.

The newest and most compact Smart IP loudspeaker, the 4410 uses PoE to produce uncompromised SPL and acoustic performance. Offering extraordinary coverage, clarity and intelligibility, the 4410 is manufactured in Finland using certified sustainable methods - providing decades of reliable service.

The 4410 integrates tightly with Genelec Smart IP Manager software - which allows installers to configure an almost unlimited number of rooms, zones, loudspeakers and audio channels, and includes device discovery, a versatile room EQ tool set, system organisation and status monitoring.

Day-to-day end user control of basic functions can then be achieved via integration with third party automation systems, or via the simple Smart IP Controller mobile device app.

Dante Network Transmission

Dante is used for audio transmission to achieve digital and network transmission management. Dante is based on layer 3 IP network technology and adopts Zeroconf protocol to simplify the network operation mode. It can realize long-distance transmission of two-way high-quality big data and perfect synchronous playback with low delay. The device is plug and play, system construction has no topology limitation, installation and configuration is convenient, and wiring is simple and easy.

PoE power supply

Ethernet power supply and audio and data transmission are integrated, simplifying cable layout and meeting Ethernet engineering specifications. PoE network cabling uses 50V dc power supply for bearing Ethernet cables, without restrictions on high-voltage ac cabling, and better meets site safety and fire prevention specifications.

Technical parameters：

Speaker model: CS-8D

Unit configuration: 8"(200mm) Speaker unit，1" Tweeter

Frequency range: 100Hz-18kHz

Rated power: 60W

Sound pressure level: 112dB

Sensitivity: 93dB

Coverage Angle: 100°×100°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Product size (mm) : 281×247(Ф×H)

Opening size (mm) : Ф245

The Spik 2c is a 8 x 2" Dante, PoE+ powered column speaker.

Extra-thin 68mm wide with aluminum housing. Inspired by the Spik 3 design, it's a welcome addition to the Spik range of speakers, further extending the range of applications where Frentik can be used. With its narrow directivity Spik 2c is a perfect speaker for houses of worship, cultural venues, museums or the hospitality industry amongst many others. Available in black or white.

Dante Network Transmission

Dante is used for audio transmission to achieve digital and network transmission management. Dante is based on layer 3 IP network technology and adopts Zeroconf protocol to simplify the network operation mode. It can realize long-distance transmission of two-way high-quality big data and perfect synchronous playback with low delay. The device is plug and play, system construction has no topology limitation, installation and configuration is convenient, and wiring is simple and easy.

PoE power supply

Ethernet power supply and audio and data transmission are integrated, simplifying cable layout and meeting Ethernet engineering specifications. PoE network cabling uses 50V dc power supply for bearing Ethernet cables, without restrictions on high-voltage ac cabling, and better meets site safety and fire prevention specifications.

Technical parameters：

Speaker model: CS-6D

Unit configuration: 6.5"(165mm) Speaker unit，1" Tweeter

Frequency range: 95Hz-20kHz

Rated power: 50W

Sound pressure level: 112dB

Sensitivity: 93dB

Coverage Angle: 100°×100°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Product size (mm) : 264×210 (Ф×H)

Opening size (mm) : Ф221

Amate Audio’s latest version Active+™ onboard power & DSP control platform, delivers 1500 W Class D bi-amplification and colour touchscreen operated DSP loudspeaker system management, with advanced FIR filters, system presets, Dante™ audio networking and Ethernet / Wi-Fi remote control.

With its asymmetrical trapezoidal form factor the X14FD can be hung, flown, stacked or pole mounted in FoH PA applications; or floor-standing on its horizontal axis, it is a high performance stage monitor.

Dante Network Transmission

Dante is used for audio transmission to achieve digital and network transmission management. Dante is based on layer 3 IP network technology and adopts Zeroconf protocol to simplify the network operation mode. It can realize long-distance transmission of two-way high-quality big data and perfect synchronous playback with low delay. The device is plug and play, system construction has no topology limitation, installation and configuration is convenient, and wiring is simple and easy.

PoE power supply

Ethernet power supply and audio and data transmission are integrated, simplifying cable layout and meeting Ethernet engineering specifications. PoE network cabling uses 50V dc power supply for bearing Ethernet cables, without restrictions on high-voltage ac cabling, and better meets site safety and fire prevention specifications.

Technical parameters：

Speaker model: CS-4D

Unit configuration: 4"(100mm) Speaker unit

Frequency range: 125Hz-20kHz

Rated power: 30W

Sound pressure level: 108dB

Sensitivity: 91dB

Coverage Angle: 100°×100°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Product size (mm) : 204×185 (Ф×H)

Opening size (mm) : Ф169

Technical parameters：

Speaker model: CA-306D

Unit configuration: 6×3"(75mm) Full frequency unit

Frequency range: 130Hz-20kHz

Rated power: 120W

Sound pressure level: 118dB

Sensitivity: 95dB

Coverage Angle: 100°×50°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Size (mm) : 124×548×154 (W×H×D)