Cart
← Back to Product Catalog

DMIX – CNET8D

Speakers

More details

Similar Products

CX110P
  • DMIX

DMIX – CX110P

Speaker model: CX110P

Speaker type: 10”Active coaxial loudspeaker

Unit configuration: LF: 10" unit 2"(50mm）Voice coil

HF: 1.7"（44mm）Voice coil driver

Frequency response: 75Hz-17kHz(-10dB)

Rated power: LF: 160W， HF: 40W

Sensitivity: LF: 95dB， HF: 105dB

Sound pressure level： 124dB (peak)

Radiation Angle: 90°×90°

Crossover point: DSP control

Size (mm) : 480×332×340 (W×H×D)

Module amplifier power: HF：100W，LF：500W (Class D)

Module input link: 1 balanced XLR input / 1 set of Dante signal input and output / 1 set of LINK output

Module DSP control: RS485、USB 或 Dante

    Speakers
See the product
renkus-heinz-ic24-16-rd_600px|renkus-heinz-ic24-16-rd_600px
  • Renkus-Heinz

Renkus-Heinz – IC24-16-RD

Digitally Steerable Line Array Loudspeaker Systems Since 2005 Renkus-Heinz have been leading the field in Digitally Steerable loudspeakers. ICONYX has now been installed in thousands of project worldwide, from LAX International Airport in Los Angeles to the Great Hall of the People in Beijing, China. Truly the most flexible, powerful and architecturally seamless, Digitally Steerable Column Array on the market Iconyx brings intelligible sound to even the most demanding acoustic environments.
  • Dual Redundant Dante Connectivity
  • RHAON II Control and Dante audio delivery over the same Dante network connection
  • 11x 4" Coaxial Transducers each with three HF tweeters
  • 5x 4" LF/MF Transducers progressively spaced
  • 16x Amplifier and DSP channels
  • Beam control effective down to 250Hz
  • Multiple beams and multiple acoustic beam centers
  • Multiple Configuration Presets
  • Slim, Low-Profile Design
ICONYX technology gives sound system designers the power to create a system to cover even the most problematic spaces. Up to 8 steerable beams can be individually shaped and aimed from a single IC24-16-RD column using the powerful software-controlled DSP. Multichannel audiophile amplifiers power arrays of purpose-designed coaxial transducers, each with its own triple tweeter high frequency array. This triple tweeter "array within an array" design reduces the distance between HF sources for greatly improved high frequency performance with consistent, broad horizontal dispersion.
    Speakers
See the product
s218
  • Cadac

Cadac – S218

The S218 is a self-powered high-end subwoofer, which features 2 x 18" ported woofers. The power output of 4000 W (RMS) ensures for © very high SPL down to a frequency of 35 Hz. It can be combined with all products of the CADAC range and be used as subwoofer extension in ground stack configuration for point sources or line arrays and can be also used as ground stack horizontal subwoofer array. The DSP-electronic has 2 power amplifiers and 2 DSP channels. Internally, one S218 has 2 amplifier and 2 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the dispersion can be adjusted and optimized according to the listener area for the application of subwoofer arrays. CMAP enables to create arbitrary radiation patterns for the listener area with ground stack horizontal arrays.

    Speakers
See the product