Dante-enabled Product Catalog

CIMIX is composed of a solid aluminium console with 12 faders and a multipurpose touch screen. CIMIX is composed of a solid aluminium console with 12 faders and a multipurpose touch screen. The central processor with the switching and DSP circuits are built into a 19 inch frame of 1HU (44.1 mm). Both devices are equipped with redundant power supply units easily replaceable during the use of the mixer. Available also in a 4 channel modular version with central unit.

The perfect solution to expand input and output signal to your mixer or third party professional audio devices. Connection through MADI and DANTE protocol. The perfect solution to expand input and output signal to your mixer or third party professional audio devices. Connection through MADI and DANTE protocol.

The APA Series is a powerful processing platform that tightly integrates with its power supply featuring 96k analogue to digital converters not only on the analogue inputs++ but also directly at the speaker outputs, monitoring voltage and current. Inputs and outputs are simultaneously being processed by the DSP, along with data about the mains supply, allowing APA to adapt and correct to keep your music sounding better than ever. It’s not so difficult to add some DSP into an existing amplifier design, but to fully monitor all aspects of an amplifier’s performance from input XLR (or network port) to speaker terminals – that’s a little more involved… The APA Series can do this. We have designed a power and processing platform that tightly integrates with its power supply featuring 96k analogue to digital converters not only on the analogue inputs++ but also directly at the speaker outputs, monitoring voltage and current. Inputs and outputs are simultaneously being processed by the DSP, along with data about the mains supply, allowing APA to adapt and correct to keep your music sounding better than ever. In addition to this adaptive processing, you still have full control over a powerful suite of filtering and protection, including multiple bands of our legendary dynamic EQ, FIR filtering and phase linearisation, ultra-transparent limiting, and all the classic crossover and EQ components traditionally used to set up your system. Add to this a fully flexible matrix with the ability to source audio either locally from AES or analogue inputs++, or via a networked audio connection (Dante/AVB). With PC remote software also available, you’ll understand why we don’t think this is just an amplifier with some DSP built in… ++AES and analogue inputs standard, network audio inputs is a retro-fit option

The APT MULTI-CHANNEL CODEC is a compact and efficient solution for the transport of multiple channels of audio or MPX content over IP links. It can support up to 16 channels of audio within a single unit of rackspace - and even more IP streams when using multicast or multiple unicast technology. The APT MULTI-CHANNEL CODEC is a compact and efficient solution for the transport of multiple channels of audio or MPX content over IP links. It can support up to 16 channels of audio within a single unit of rackspace - and even more IP streams when using multicast or multiple unicast technology. A Dante Interface module enables direct connection to Dante or AES 67 networks. The 1RU frame can accommodate up to 4 AoIP modules, each equivalent to a stand-alone stereo duplex codec combining audio, dual IP transport and auxiliary data on board. It offers the entire range of audio formats and modes meeting the audio industry’s requirements: simplex, duplex, AES/EBU, AES/EBU with analog backup, analog with HI/LO or 600Ω impedance.

Danacoid's DA-0404D is a 4 balanced input + 4 balanced output module. Danacoid's DA-0404D is a 4 balanced input + 4 balanced output module. Features

• Support PoE power supply and DC12V dual power supply
• Built-in Dante module
• 4 balanced input + 4 balanced output
• Input support 48V Phantom Power
• Windows platform client software

Danacoid's DA-0808D is a DSP audio processing unit with built-in automatic mixing station, and feedback cancellation. Danacoid's DA-0808D is a DSP audio processing unit with built-in automatic mixing station, and feedback cancellation. Features

• DSP audio processing, built-in automatic mixing station, feedback cancellation, optional: echo cancellation, noise cancellation module
• Input: preamplifier, signal generator, expander, compressor, 5-band PEQ
• Output: 31-band GEQ, delay, Crossover, limiter
• Built-in automatic camera tracking function
• Support scene preset function
• Automatic protection memory function when power off

Danacoid's DA-1616D is a DSP audio processing unit with built-in automatic mixing station, and feedback cancellation. Danacoid's DA-1616D is a DSP audio processing unit with built-in automatic mixing station, and feedback cancellation. Features

• DSP audio processing, built-in automatic mixing station, feedback cancellation, optional: echo cancellation, noise cancellation module
• Input: preamplifier, signal generator, expander, compressor, 5-band PEQ
• Output: 31-band GEQ, delay, Crossover, limiter
• Built-in automatic camera tracking function
• Support scene preset function
• Automatic protection memory function when power off.

Outline's Newton is the next generation in audio system control and networking. Newton advances the management of sophisticated audio systems by combining new filter technology, multi-format audio signal routing, multi-format standards conversion and digital signal synchronisation in a single 1RU networkable chassis. Outline's Newton is the next generation in audio system control and networking. Newton advances the management of sophisticated audio systems by combining new filter technology, multi-format audio signal routing, multi-format standards conversion and digital signal synchronisation in a single 1RU networkable chassis. Each Newton processor combines powerful WFIR filters (unique to Outline), clock management and a very high number of input and output channels (216 x 216). Internal synchronous and asynchronous sample rate converters manage all I/O operations and Newton can be synchronised with any one of the 14 choices of clock sources. Mix and Match Matrix I/O routing allows translation and re-distribution of digital audio over multiple standards simultaneously.  Combining power and flexibility with an easy to use control interface, Newton forms the nucleus of next generation audio systems. Multiple Newton devices are easily interconnected to form a network that is scalable to meet all audio applications. Powerful processing features and multiple audio network standards combine to make Newton the ideal control core for any audio system from Touring to Live Broadcast Events and Fixed Installations.

Outline's Newton is the next generation in audio system control and networking. Newton advances the management of sophisticated audio systems by combining new filter technology, multi-format audio signal routing, multi-format standards conversion and digital signal synchronisation in a single 1RU networkable chassis. Outline's Newton is the next generation in audio system control and networking. Newton advances the management of sophisticated audio systems by combining new filter technology, multi-format audio signal routing, multi-format standards conversion and digital signal synchronisation in a single 1RU networkable chassis. Each Newton processor combines powerful WFIR filters (unique to Outline), clock management and a very high number of input and output channels (216 x 216). Internal synchronous and asynchronous sample rate converters manage all I/O operations and Newton can be synchronised with any one of the 14 choices of clock sources. Mix and Match Matrix I/O routing allows translation and re-distribution of digital audio over multiple standards simultaneously.  Combining power and flexibility with an easy to use control interface, Newton forms the nucleus of next generation audio systems. Multiple Newton devices are easily interconnected to form a network that is scalable to meet all audio applications. Powerful processing features and multiple audio network standards combine to make Newton the ideal control core for any audio system from Touring to Live Broadcast Events and Fixed Installations. While Newton 16 is an all-digital device, Newton 16+4 adds the useful capability of local analog inputs and outputs.  Newton 16+4 adds 4 auxiliary analog inputs and outputs. Each analog input is also provided with additional processing and matrix allowing inputs to be processed, routed and mixed into the main matrix. All three versions of Newton share the same motherboard and it is possible to upgrade from Newton 16 to Newton 16+4.

Outline's Newton is the next generation in audio system control and networking. Newton advances the management of sophisticated audio systems by combining new filter technology, multi-format audio signal routing, multi-format standards conversion and digital signal synchronisation in a single 1RU networkable chassis. Outline's Newton is the next generation in audio system control and networking. Newton advances the management of sophisticated audio systems by combining new filter technology, multi-format audio signal routing, multi-format standards conversion and digital signal synchronisation in a single 1RU networkable chassis. Each Newton processor combines powerful WFIR filters (unique to Outline), clock management and a very high number of input and output channels (216 x 216). Internal synchronous and asynchronous sample rate converters manage all I/O operations and Newton can be synchronised with any one of the 14 choices of clock sources. Mix and Match Matrix I/O routing allows translation and re-distribution of digital audio over multiple standards simultaneously.  Combining power and flexibility with an easy to use control interface, Newton forms the nucleus of next generation audio systems. Multiple Newton devices are easily interconnected to form a network that is scalable to meet all audio applications. Powerful processing features and multiple audio network standards combine to make Newton the ideal control core for any audio system from Touring to Live Broadcast Events and Fixed Installations. While Newton 16 is an all-digital device, Newton 16+8 adds the useful capability of local analog inputs and outputs.  Newton 16+8 adds 8 auxiliary analog Inputs and outputs. Each analog input is also provided with additional processing and matrix allowing inputs to be processed, routed and mixed into the main matrix. All three versions of Newton share the same motherboard and it is possible to upgrade from Newton 16 to Newton 16+4or Newton 16+8.

The Sapphire III is a four-channel audio power amplifier that provides 250W (4 ohms) output power per channel. It can also use bridge mode to provide 500W (8 ohm) two-channel output. Unlike Sapphire II, it adds the latest digital audio processing technology and support for Dante digital network audio transmission technology. The Sapphire III is a four-channel audio power amplifier that provides 250W (4 ohms) output power per channel. It can also use bridge mode to provide 500W (8 ohm) two-channel output. Unlike Sapphire II, it adds the latest digital audio processing technology and support for Dante digital network audio transmission technology. It uses the latest SSA Technology and digital audio transmission and processing technologies to create:

• PSM phase modulation technology, zero crossover distortion
• Single-stage power conversion is equivalent to the direct use of AC mains power, which is one level lower than traditional class D power amplifiers.
• Two-way energy recovery system to improve power conversion efficiency and effectively reduce the speaker coil voice temperature
• ZVS, ZCS Soft Switch Technology, Significantly Reduces Switch Heat, Further Improves Conversion Efficiency
• Overall efficiency up to 90% ultra high

In the past 100 years, the audio power amplifier topology has undergone Class-A, Class-AB, Class-D, etc., but it has always been a compromise between efficiency and sound quality. Until today, SSA Technology has achieved Sapphire III's Class-A sound quality with 90% overall system efficiency with its advanced and precise audio modulation technology, single-stage power conversion, bi-directional energy recovery and soft-switching technology. Truly "efficient sound!" The application of the latest digital audio processing and transmission technology has enabled Sapphire III to achieve a new level of efficiency and sound quality. It is highly efficient, lightweight, reliable, and flexible, combined with its Class-A sound quality, making it widely used in system integration projects such as small entertainment shows and multi-purpose halls.

The Sapphire III is a four-channel audio power amplifier that provides 250W (4 ohms) output power per channel. It can also use bridge mode to provide 500W (8 ohm) two-channel output. Unlike Sapphire II, it adds the latest digital audio processing technology and support for Dante digital network audio transmission technology. Sapphire III BASE is a four-channel audio power amplifier that provides 250W (4 ohms) output power per channel. It can also use bridge mode to provide 500W (8 ohm) two-channel output. Unlike Sapphire II, it adds the latest digital audio processing technology and support for Dante digital network audio transmission technology. It uses the latest SSA Technology and digital audio transmission and processing technologies to create:

• PSM phase modulation technology, zero crossover distortion
• Single-stage power conversion is equivalent to the direct use of AC mains power, which is one level lower than traditional class D power amplifiers.
• Two-way energy recovery system to improve power conversion efficiency and effectively reduce the speaker coil voice temperature
• ZVS, ZCS Soft Switch Technology, Significantly Reduces Switch Heat, Further Improves Conversion Efficiency
• Overall efficiency up to 90% ultra high

In the past 100 years, the audio power amplifier topology has undergone Class-A, Class-AB, Class-D, etc., but it has always been a compromise between efficiency and sound quality. To date, SSA Technology has achieved Sapphire III BASE to Class-A sound quality levels with 90% overall system efficiency with its advanced and precise audio modulation technology, single stage power conversion, bidirectional energy recovery and soft switching technology. Really achieved "high efficiency and good voice!" Sapphire III BASE uses the latest digital audio processing and transmission technology, and targeted optimizations have been made. The efficient, reliable, and optimized application design, combined with its Class-A sound quality level, make it widely used in fixed installation systems.

The PoE25DD is a 20w/8 ohm output audio power module. It adopts the latest PoE technology standard and can solve power supply and Dante digital audio signal transmission and control with only one network cable. The PoE25DD is a 20w/8 ohm output audio power module. It adopts the latest PoE technology standard and can solve power supply and Dante digital audio signal transmission and control with only one network cable.

• Integration of network PoE power supply and Dante audio data transmission, simplifying cable layout and compliance with Ethernet engineering specifications;
• Audio transmission realizes digitization, networking, and system expansion;
• distributed digital audio systems: In large audio systems with multiple input and output devices, the audio devices are connected decentralized, routing and signal distribution through software;
• Through the Dante interface, it is ensured that the network audio data has excellent delay indicators, and the number of audio channels carried by a single network cable terminal reaches 64 channels of input and 64 channels of output;
• Dante Controller software allows easy network-wide Dante device discovery and full network audio routing configuration.
• The PoE network cabling uses an Ethernet cable to carry 48V DC power. It has no restrictions on high-voltage AC wiring and better meets site safety and fire protection specifications. It can be widely used in ballrooms/function rooms, bars/restaurants, classrooms, conference rooms, chapels, theme parks, and shopping malls.

PoE 60DD is an audio power module with 60w /8 output. It adopts the latest PoE technology standard and can solve power supply and Dante digital audio signal transmission and control with only one cable.  PoE 60DD is an audio power module with 60w /8 output. It adopts the latest PoE technology standard and can solve power supply and Dante digital audio signal transmission and control with only one cable. 

• Integration of network PoE power supply and Dante audio data transmission, simplifying cable layout and compliance with Ethernet engineering standards;
• Audio transmission realizes digitization, networking, and system expansion;
• distributed digital audio systems: In large audio systems with multiple input and output devices, the audio devices are connected decentralized, routing and signal distribution through software;
• Through the Dante interface, it is ensured that the network audio data has excellent delay indicators, and the number of audio channels carried by a single network cable terminal reaches 64 channels of input and 64 channels of output;
• Dante Controller software allows easy network-wide Dante device discovery and full network audio routing configuration.
• The PoE network cabling uses an Ethernet cable to carry 48V DC power. It has no restrictions on high-voltage AC wiring and better meets site safety and fire protection specifications. Can be widely used in ballroom / multi-purpose hall, classrooms, conference rooms, theme parks and other fields.

The RPO series is Redx's latest speaker series with built-in PoE60DD active audio power module, including 6”, 8” and 6.5”, 8” ceiling speakers. Following the latest PoE technology standard, powered speakers, Dante digital audio signal transmission and control can be solved with only one cable. The RPO series is Redx's latest speaker series with built-in PoE25DD active audio power module, including 4", 5", 6", 8" and two sizes of 6.5", 8" ceiling speakers. Following the latest PoE technology standard, powered speakers, Dante digital audio signal transmission and control can be solved with only one cable.

• The RPO series speakers integrate PoE power supply and Dante audio data transmission, achieving a simple cable layout, conforming to the Ethernet engineering standards, achieving digitalization, networking, and system scalability;
• Using Dante Controller software, each RPO speaker in the system has a unique network ID to identify its identity, which can easily achieve network-wide Dante device discovery and network-wide audio routing configuration.
• The RPO series active speaker adopts the PoE standard 48V DC power supply of the Ethernet cable, which has no restrictions on high-voltage AC wiring, and better meets the safety and fire protection standards of the site. Can be widely used in bars / restaurants, classrooms, churches, shopping malls and other fields.

RPO Series Speakers:

• RPO6WA
• RPO8WA
• RPO65
• RPO80
• RPO4
• RPO5
• RPO6
• RPO8

 

The Redx series digital audio processor is a freely designed audio processing and control system. It includes advanced DSP processing technology, with new adaptive feedback, echo, and noise cancellation. Full-featured matrix mixing function, because most of the control is through the software, so the appearance is more concise and bright. The Redx series digital audio processor is a freely designed audio processing and control system. It includes advanced DSP processing technology, with new adaptive feedback, echo, and noise cancellation. Full-featured matrix mixing function, because most of the control is through the software, so the appearance is more concise and bright. A generation of network audio processor, integrated with low-delay Dante module, provides 8 input, 8 output, all connected to the network port. The audio input source can be controlled by software to distribute the routing, and can be accessed anywhere in the network, enabling rich algorithm processing, eliminating the need for physical line connections.

• Supports tablet control and distributed cloud control;
• DSP audio processing, built-in automatic mixer, optional feedback cancellation, echo cancellation, noise elimination module;
• Inputs per channel: preamplifier, signal generator, expander, compressor, 5-band parametric equalization;
• Output per channel: 31-stage graphic equalizer, delayer, frequency divider, limiter;
• full-featured matrix mixing function;
• Optional Dante network audio module;
• Built-in automatic camera tracking function;
• Support scene preset function;
• Automatic power-off protection memory function

The Redx series digital audio processor is a freely designed audio processing and control system. It includes advanced DSP processing technology, with new adaptive feedback, echo, and noise cancellation. Full-featured matrix mixing function, because most of the control is through the software, so the appearance is more concise and bright. The Redx series digital audio processor is a freely designed audio processing and control system. It includes advanced DSP processing technology, with new adaptive feedback, echo, and noise cancellation. Full-featured matrix mixing function, because most of the control is through the software, so the appearance is more concise and bright. A generation of network audio processor, integrated with low-delay Dante module, provides 16 input and 16 output network audio transmission channels, and configures up to 16 input and 16 output balanced analog channels, all connected to the network port. The audio input source can be controlled by software to distribute the routing, and can be accessed anywhere in the network, enabling rich algorithm processing, eliminating the need for physical line connections.

• Supports tablet control and distributed cloud control;
• DSP audio processing, built-in automatic mixer, optional feedback cancellation, echo cancellation, noise elimination module;
• Inputs per channel: preamplifier, signal generator, expander, compressor, 5-band parametric equalization;
• Output per channel: 31-stage graphic equalizer, delayer, frequency divider, limiter;
• full-featured matrix mixing function;
• Optional Dante network audio module;
• Built-in automatic camera tracking function;
• Support scene preset function;
• Automatic power-off protection memory function

DSPPA's DT2200 is a 2x2 Dante audio input and output terminal. DSPPA's DT2200 is a 2x2 Dante audio input and output terminal. Features

• Support universal Dante protocol, can work with other Dante devices;
• With switch to select between Mic input and Line input of phoenix interface;
• With adjustable knob for volume control of Mic & Line;
• Compact design, suitable for wall and rack mount (3 pcs);
• Support POE power supply, flexible for installation;
• Support both Dante control software & DSPPA 

DSPPA's DT4000 is a Dante audio matrix. DSPPA's DT4000 is a Dante audio matrix. Features

• Distributed system with Dante LAN digital audio transmission technique
• No suppression, no dissipation and no delay, 48 kHz audio sampling
• Double network interface design
• 4-channel balanced input and output
• Individual on/off switch of 48V phantom power of 4 channels, optional input signal-mic or line input
• Control volume through level adjustment in each channel

DSPPA's DT4300 is a 16x16 Dante audio matrix. DSPPA's DT4300 is a 16x16 Dante audio matrix. Features

• Dante LAN digital audio matrix transmission technique with distributed system
• No suppression, no dissipation no delay, and 48 kHz audio sampling
• Double network interface
• 16 channel balanced input and output
• Individual volume control of line input and output
• Each output has 7-level isostatic adjustment
• Audio of 1-16 channel could be mixed and exported in the 16th channel

DSPPA's DT series of power amplifiers include the DT4106, DT4112, DT4125, and DT4135.  DSPPA's DT series of power amplifiers include the DT4106, DT4112, DT4125, and DT4135.  Features

• Rated power: 2x60W/2x120W/2x250W/2x350W
• Support cascaded linkage between Dante devices
• 2 AUX inputs, 2 channels speaker outputs of 70V/100
• With EMC input and activation output to volume controller
• Black & silver colors available

DSPPA's D2125 is a 2-channel amplifier. DSPPA's D2125 is a 2-channel amplifier. Features

• 2 channel amplifiers within one 1U & 19" case
• Two audio inputs, can be added to the existing Dante system
• Two priority inputs and two 100V inputs as audio sources
• 70V/100V speaker output for long distance transfer
• Industrial design for audio project, long term & stable use

DSPPA's D2250 is a 2-channel amplifier. DSPPA's D2250 is a 2-channel amplifier. Features

• Comply with Dante Network System
• 2 channel amplifiers within one 1U & 19" case
• Two audio inputs, can be added to the existing Dante system
• Two priority inputs and two 100V inputs as audio sources
• 70V/100V speaker output for long distance transfer
• Industrial design for audio project, long term & stable use

Best-in-class SPL performance, sophisticated DSP processing, unrivaled low-frequency bass sound reproduction— the new DZR delivers on all fronts realizing a truly professional sound delivered with a level of power that belies its compact, lightweight design. Best-in-class SPL performance, sophisticated DSP processing, unrivaled low-frequency bass sound reproduction— the new DZR delivers on all fronts realizing a truly professional sound delivered with a level of power that belies its compact, lightweight design. The culmination of all Yamaha’s accrued sound reinforcement, acoustics, and signal processing technology expertise—particularly with the introduction of our Dante-enabled models—DZR represents Yamaha’s first fully-integrated, smart/editable speaker range of professional, powered loudspeakers. Dante-enabled models:

• DZR315-D
• DZR15-D
• DZR12-D
• DZR10-D

Best-in-class SPL performance, sophisticated DSP processing, unrivaled low-frequency bass sound reproduction— the new DZR delivers on all fronts realizing a truly professional sound delivered with a level of power that belies its compact, lightweight design. Not for the faint of heart, the newest DXS XLF’s go deeper than any model before, with an extended low frequency of 30Hz— perfect for professional touring musicians, DJ’s, and sound engineers who need that extra-low, thundering bottom end that you just can’t get from other subwoofers in this class. Flexible DSP and a bass-reflex cabinet design with a wide, flared port ensure your lower frequencies maintain outstanding clarity and musicality even when the volume is cranked. Dante-enabled models:

• DXS18XLF-D
• DXS15XLF-D

Digital Mixer with Dante

DSPPA's DT4200E is a microphone that supports Dante and is compatible with other Dante devices. DSPPA's DT4200E is a microphone that supports Dante and is compatible with other Dante devices.