Musicrown – DF16.16MNE


More details

Similar Products

TASCAM_-_MM-2D-IN-E
  • TASCAM

TASCAM – MM-2D/IN-E

Built-in DSP 2 mic/line input / 2 line output Dante converter to respond to various needs of contractor market and professional audio scene. Built-in DSP 2 mic/line input / 2 line output Dante converter to respond to various needs of contractor market and professional audio scene. The MM-2D-E is a compact converter that converts 2-channel mic/line input/output signals into Dante signals. With half the size of a standard 1U rack, the MM-2D-E is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. MM-2D-E supports up to 96kHz/24bit and uses Euroblock connectors for analog mic/line input/output.  
    I/O Interfaces
  • Dante Ch: 4x4
  • 16-bit, 24-bit
fohhn-abx-5_1200px|fohhn-abx-5_1200px
  • Fohhn

Fohhn – ABX-5

The ABX-5 can be used as an interface between Dante™ audio networking and the modular active FOHHN FOCUS VENUE loudspeaker system and as a Dante™ to AES/EBU Breakout module and FOHHN-NET Ethernet adapter. The ABX-5 can be used in two ways: 1. As an interface between Dante™ audio networking and the modular active FOHHN FOCUS VENUE loudspeaker system. In this situation, the ABX-5 does not need an additional external power supply. 2. As a Dante™ to AES/EBU Breakout module and FOHHN-NET Ethernet adapter. In both cases FOHHN-NET control signals will be transmitted via Ethernet. The ABX-5 is equipped with a Dante™ Brooklyn II module. It has a Dante™ Primary and Secondary port for redundant applications.
    I/O Interfaces
  • Dante Ch: 8x0
  • 24-bit
mansionDIC2R43A
  • Mansion

Mansion – DIC2R43A

DIC2R43A is a high quality Dante interface box for converting three Dante channels to CSP products, and an additional analogue output. An analogue input channel and  three CSP product input channels to Dante network. Features: * Convert CSP A, B and C signals to Dante network * Convert 3-channel Dante signals to A, B and C channels of CSP. * Signal level and limit LED indicator for each input channel on the front panel * Switchable Line / Microphone / 48V phantom power for auxiliary input * Provide high quality preamplifier for microphone *Adjustable gain for each input channel on the front panel is -20 dB to + 20 dB * LED indicator for the signal level of each output channel on the front panel. * Power over Ethernet (PoE) or 24VDC power supply * LED indicators show power and network status. * High resolution 24-bit of DAC and ADC *Dimension: 146mm x 41.6mm x 96.9mm (WHD)
    I/O Interfaces