Product Information
The AoDoMX4 provides one RJ45 Dante input and four Neutrik black XLR analog outputs.
The AoDoMX4 provides one RJ45 Dante input and four Neutrik black XLR analog outputs.
Similar Products
- Danacoid
Danacoid – DN-210RXC
Video: HDMI v2.0 and HDCP 2.0
Supported resolution: 4096 x 2160 /60P (4:4:4)；
Supports wiring of up to 8 HDMI embedded LPCM digital audio channels, as well as 24bit,192kHz sampling frequency for each sample.
Supports transmission of embedded HBR audio formats: such as Dolby digital true HD and DTS-HD Master Audio.
IP network-based audio, supports transmission of network-based audio via switches
2 * USB ports, supports KVM function
IR Control: Supports bidirectional IR transmission
RS-232 Control: supports bidirectional RS-232 transmission, up to 115,200 baud
HDMI input 1 * 19-pin female HDMI interface
Analog stereo audio: 1 * 3.5mm stereo-mini jack
10GbE and 1GbE ports: 2 * shielding RJ45 interface and LED indicator light
1 * IR input: 3.5mm stereo mini jack
Maximum pixel clock frequency: supports pixel clock frequency up to 594MHz
Switching Plane: independent switching planes supported I/O switch arrays of all connected videos, audios, RS-232 and IR signals
- I/O Interfaces
- BARE
BARE – BE-3232D
The
network audio processor is a network audio processor with 32 digital inputs
and 32 digital outputs. It adopts the industry-leading ADI DSP SHARC21489
chip with a maximum operating frequency of 450MHz. The input and output
modules of the DSP can be customized according to the actual situation. At
the same time, it has independent AFC, AEC, ANS, AGC, gain sharing automatic
mixing, threshold automatic mixing and other processing modules to meet the
needs of audio processors and transmissions in various places. Such as
meeting rooms, multi-function halls, conference center auditoriums,
administrative centers, etc.
- I/O Interfaces
- Hugel
Hugel – PRU
The PRU basically serves as a audio router with up to 4 interfaces with 64 channels each in a 19"/1RU case. Every single input can be routed to one or many outputs using the EmBER+ interface. For each of the 4 interfaces the protocol can be chosen to be either Dante (Audinate's Brooklyn II) or SMPTE-2110 (Ross Video's Liberty). The built-in sample rate converters allow therefore up to 4 independently synchonized clock domains to be connected to the PRU. Using two of each module type, a 128-channel bridge between Dante and SMPTE-2110 can be formed. Optionally PRU can be extended by a central intercom matrix. The 256x256 matrix is fully equipped with summing and level adjusting features.
- I/O Interfaces