Mansion - PLA2DI

Mansion – PLA2DI

Product Information

PLA2DI power amplifier provides 120W output power per channel into 4Ω and 8Ω, the amplifier can also be bridged to supply up to 240W output power into 70V or 100V.

PLA2DI power amplifier provides 120W output power per channel into 4Ω and 8Ω, the amplifier can also be bridged to supply up to 240W output power into 70V or 100V. Designed in Class D amplification with the slot card of Dante interface, accepts the Audio signal from the Dante network. With the compact housing, PLA2DI provides the excellent sound and reliable quality for many install projects.

Features

Two Channels Model – 120W RMS
Stereo into 4-8 Ohm loads
Bridged mode 240W output for 70V or 100V (Direct Drive)
Power down after ~15 minutes of no signal and comply with Energy Star Power consumption limits of < 0.5W in standby
Yellow LED (Front Panel) to indicated Standby mode is active
Terminal Block analog audio inputs
Selection for Power-Up mode
Switch for High Pass Filter
Natural cooling without Fan
TRIGGER could be external remoting ON/OFF
Short circuit protection
Overheating protection

Director M4800D

The AudioControl Director Model M4800D combines 100 watts/8-Ohms, 200 watts/4-Ohms of output into an 8x4 stereo matrix that extracts clarity and detail from any loudspeaker, plus onboard DSP (digital signal processing) including graphic and parametric equalization by zone. The M4800D allows for the ability to bridge channels, giving integrators configuration flexibility for any imaginable system design.

Amplifiers

See the product

LEA Professional

Connect Series 34D

The Connect Series 34D delivers one of the most feature-rich amplifier experiences available in the industry – in a smaller form factor. Featuring 96kHz DSP, WebUI, SharkWare, LEA Cloud, third-party APIs, speaker tunings, and more, this amplifier is the right choice for your next install. Each of the half-rack models (CS34, CS64, CS124, CS34D, CS64D, and CS124D) are built with fully routable analog inputs, four amplifier channels with Lo-Z, 70V, or 100V selectable by channel and D-units include Dante and AES67 connectivity. All models boast three different ways of network connection: using the built-in Wi-Fi Access Point, connecting to an existing Wi-Fi network, or using a Local Area Network Ethernet connection.

Amplifiers

See the product

Fohhn

Fohhn – MA-4.100 DAN

The MA-4.100 DAN is a compact digital amplifier with integrated 4 × 4 matrix was developed for media applications and small-scale sound reinforcement. The MA-4.100 DAN is a compact digital amplifier with integrated 4 × 4 matrix was developed for media applications and small-scale sound reinforcement. The MA-4.100 is equipped with a Dante UltimoX4 audio input. Despite being very small, the new amplifier features the latest generation of Fohhn DSPs – integrated into both inputs and outputs. The MA-4.100 is perfectly suited for smaller audio applications:

Conference rooms and -systems
Small lecture theatres and class rooms
Hotels and restaurants
Integration into media boards
Media sound for displays and videowalls
Shops and retail
Fitness centres
Low-ohm public address systems
Amusement parks
Museums and exhibitions
Delay- and near field amplification within larger systems
Small churches and community halls

Amplifiers

See the product

Mansion – PLA2DI

Product Information

Similar Products

Director M4800D

Connect Series 34D

Fohhn – MA-4.100 DAN

Support

Company

Dante Networking Alliance

Mansion – PLA2DI

Product Information

Similar Products

Director M4800D

Connect Series 34D

Fohhn – MA-4.100 DAN

I would like to receive product notices, training and event information and Dante product marketing updates via email. Opt-out at any time. For further details, including about your rights, see our Privacy Policy.