Musicrown – DLS Dante


More details

Similar Products

wohler
  • Wohler

Wohler – OPT-DANTE (12G)

Installing a Wohler unit with the Dante hardware option into an existing and functioning Dante network is virtually plug and play. The rear panel AoIP jack supports 1Gb/s and 100Mb/s Ethernet devices in Dante Audio over IP network configurations. Channel source selections are made by choosing Input Type ‘AoIP’ in the Configuration-Configure Presets page regardless of which AoIP option is installed. The iAM-series unit is set up at the Wohler factory to be used as a slave rather than a master within the Dante network. Other devices or software, such as a Dante Controller, are expected to be responsible for most device configurations and all audio routing.

    Dante Interface Cards
  • Dante Ch: 64x0
  • AES67 Enabled
monismsis2
  • MONISMS

MONISMS – Dante I2S Module card MNS-DANTE-I2S-R-02-1P

MNS-DANTE-I2S-TR-XX-1P DANTE I2S AUDIO RECEIVE / TRANSMIT MODULE [ Dante to I2S and I2S to Dante ], Which can be easy integrated into your products. Create a unique selling proposition and differentiate your product with rapid and flexible customization.
[Model:MNS-DANTE-I2S-R-02-1P]: For networked audio receiver products requiring 2 channels at 44.1 kHz, 48kHz, 88.2kHz and 96kHz [ 16, 24 or 32-bit ] sample rates.

    Dante Interface Cards
  • Extron Electronics

Quantum OUT32AT

Quantum OUT32AT output card for Quantum Ultra II videowall processors that provides direct connection to Dante® systems. It delivers up to 32 stereo pairs of digital audio from a videowall system to a Dante audio network. Audio for each Dante stereo pair can originate from a source connected to an Extron Quantum IN4FOX3 or Quantum IN4HDMI 4K PLUS input card. Alternatively, it can follow the active program audio for any of up to 20 available canvases. A single Quantum OUT32AT output card can support an entire Quantum Ultra II system, simplifying audio management and videowall design.
    Dante Interface Cards
  • Dante Ch: 0x64