Cart
← Back to Product Catalog

AEQ – FR14

Dante Interface Cards

More details

Similar Products
  • Extron Electronics

Quantum OUT32AT

Quantum OUT32AT output card for Quantum Ultra II videowall processors that provides direct connection to Dante® systems. It delivers up to 32 stereo pairs of digital audio from a videowall system to a Dante audio network. Audio for each Dante stereo pair can originate from a source connected to an Extron Quantum IN4FOX3 or Quantum IN4HDMI 4K PLUS input card. Alternatively, it can follow the active program audio for any of up to 20 available canvases. A single Quantum OUT32AT output card can support an entire Quantum Ultra II system, simplifying audio management and videowall design.
    Dante Interface Cards
  • Dante Ch: 0x64
See the product
Electrovoice_-_RCM-28|Electrovoice_-_RCM-28
  • Electro Voice

Electro-Voice – RCM-28

The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications. The module can be used in Electro-Voice Tour Grade amplifier models. Installing the RCM-28 turns a conventional amp into a remote amplifier, which, at any time, provides complete overview of the overall system status and control of all system parameters. RCM-28 modules allow the integration of amplifiers into an OMNEO network with up to 100 devices in a single subnet without additional hardware. OMNEO is a media networking architecture for professional applications. Using standard IP Ethernets, media products that integrate OMNEO can be assembled into networks of 2 to 10,000 cooperating devices that exchange studio-quality synchronized multichannel audio and share common control systems. This offers the possibility to control and monitor an entire sound system from one or more PCs using the IRIS-Net - Intelligent Remote & Integrated Supervision - software package. In addition to digital signal processing functions, the RCM-28 also offers a digital audio input (AES/EBU), OMNEO network audio inputs and outputs, and freely programmable control inputs and control outputs.
    Dante Interface Cards
  • Dante Ch: 3x3
  • 24-bit
See the product
KS_audio_d-mod-front
  • KS Audio

KS Audio – D Mod

The 4-channel loudspeaker controller module with digital signal processing for amplifiers of the KS AUDIO series

CA 4D and TA 4D. A unique convincing solution for perfect sound and easiest handling. The KS D MOD controller module complements the F MOD modules for applications where no quick change of the loudspeaker systems is required - i.e. especially in the installation area.

The one-time configuration of the loudspeaker system is done on the module by a USB stick transmitting the data while the system is switched on. During that process, both the signal inputs and the power outputs automatically receive the correct function:

from four individual channels

via two channels in Bi-Amp

or high-power bridge mode

to a single-channel 3-way active loudspeaker system with woofer-bridge mode output, and optionally “BI-Amp” control.

a SAT mode is also available in which the L+R signal is summed up to mono sub-low.

In addition to digital signal processing with FIR filter tech- nology, the special feature of the D MOD is its complete operability and controllability via standard networks. An integrated gigabit switch allows daisy-chaining to the next device. The KS REMOTE PC software enables easy ma- nagement and graphically, easy to understand, operation of an unlimited number of controller amplifiers arranged in groups.

All inputs can be controlled either digitally or analogously. Simultaneous digital and analog operation is also possible. A network-audio transmission using DANTETM protocol is available as an option.

Despite the many new possibilities and state-of-the-art technology, the D MOD can replace an existing analog or digital controller by simple front-panel installation. This puts your public address system back on the cutting edge of technology.

    Dante Interface Cards
See the product