Soundcraft - Vi Series Option Card

Soundcraft – Vi Series Option Card

Product Information

The Dante card allows 64 channels tobesentto/ received from a Dante network. As well as providing audio exchange with other Dante-enabled equipment, the card also allows 64 channels of audio to be connected directly to a PC or Mac computer for recording or processing, by using a standard Ethernet connection*.

Routing and setup of the network is done using an external computer running Dante Controller software (available FOC from the Audinate website).

A BNC sync output connector on the card allows the console’s wordclock input to be driven by the network clock, if required by the clocking setup.

Specifications

Dante Ch: 64x64
Bit Depth: 24-bit
Sample Rate: 48kHz, 96kHz
AES67 Enabled

Wohler – OPT-MADI/ANLG/TOS (12G)

This card enables monitoring of 8 Analog channels on DB-25, an Optical TOSLINK Input, monitoring of 1 x MADI64 input via BNC, and an SFP Cage that accepts MADI Optical inputs.

The option card can be installed in the i-Series products listed below:

iAM-12G-SDI

This card can also be updated / upgraded to add Dante64 or Ravenna64 / AES67 processing options.

Dante Interface Cards

Dante Ch: 64x64
24-bit

See the product

Purelink

PureLink – MAX-AI-DA

The MAX-AI-DA is a Dante™ Audio with HDMI 2.0 ports input card for Media Axis™ supporting 4K/60 4:4:4 resolutions and Dante™/AES67 IP audio. Each MAX-AI-DA has primary and secondary RJ-45 ports for IP audio, four HDMI ports, and four stereo unbalanced analog ports. Media Axis is the world's only 4K60 cross platform, multi frame size matrix system with Dante and AV over IP connectivity.

Dante Interface Cards

See the product

EU-BTN21

The EU-BTN21 modules are Dante or AES67 networked, wall-mounted audio interfaces that provide bidirectional Bluetooth audio. The modules are configurable using RDL CONSOLE software. The module multicasts Bluetooth media data and module function status for use with RDL CONSOLE software and other compatible software. Stereo or summed mono audio is available to users through two Dante network channels. Stereo or mono audio may be selected using RDL CONSOLE software or by remote control commands. One Dante channel may be routed back to a connected device through the Bluetooth interface enabling full duplex communication. The installer can customize the module Bluetooth name using RDL CONSOLE software. The default module name is EU_BTN21_G2. Additional settings include the LED dim intensity and the timeout to dim the LEDs. The default timeout is 30 seconds. The EU-BTN21 modules are PoE-powered. High performance, simplicity of operation and efficiency of installation make RDL the best value in professional Bluetooth interfaces.

Dante Interface Cards

Dante Ch: 2x2
24-bit

See the product

Soundcraft – Vi Series Option Card

Product Information

Specifications

Similar Products

Wohler – OPT-MADI/ANLG/TOS (12G)

PureLink – MAX-AI-DA

EU-BTN21

Stay connected to Dante

Support

Company

Dante Networking Alliance