Cart
← Back to Product Catalog

Seikaku – DSS1608

I/O Interfaces

More details

Similar Products

Tranfer-back
  • FRENETIK

FRENETIK – Transfer

Allows the conversion and distribution of 4 analog sources on Dante™ network • detachable euroblock input/output connectors • PoE (provided) or 12V power supply (not provided)

Technical data:

Type: Dante™ interface 4x4
Input Connectors: 4 x euroblock
Output Connectors: 4 x euroblock
Audio network connector: RJ45
Input impedance: > 1.8 kohms
Maximum input level: +8 dBu
Output impedance: 200 ohms
Maximum output level: + 20 dBu
Frequency response: 20 Hz - 20 kHz (+/- 1 dB)
THD+N: < 0.02%
Power supply: PoE 802.3 af (provided) or 12 V external (not provided)
Consumption: 10 W max
Dimensions: 52 x 81 x 121 mm
Weight: 357 g

    I/O Interfaces
See the product
madi-bridge
  • Solid State Logic

SSL – MADI-Bridge

The MADI-Bridge is a broadcast specification bridge between the MADI audio format and Dante. It is a bi-directional interface that can deliver 64 channels @ 48kHz (32 channels at 96kHz, 16 channels @ 192kHz). MADI-Bridge ‘Split Mode’ enables 2 x 32 channels @ 96kHz streams to be merged to form a single 64 channel @ 48kHz stream.

MADI-Bridge also features bidirectional sample rate conversion between any asynchronous sample rates, from 44.1kHz to 192kHz. MADI-Bridge features redundant PSU, MADI and IP Network ports and in addition to the inbuilt clock redundancy options in Dante Controller, the MADI-Bridge also includes a pair of redundant sync inputs for use as a self-redundant Dante Grand master clock. 32bit MADI control tunnelling allows a pair of MADI-Bridges to be used to pass audio and user bits (including control data) of a whole MADI stream across a network.

    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit, 32-bit
See the product
symetrix-xIO-4x4_1200px|symetrix-xIO-4x4_1200px
  • Symetrix

Symetrix – xIO 4×4

The cost effective xIO 4x4 increases a system’s analog input and output channel capacity resulting in a reduction in overall price per channel. The cost effective xIO 4x4 increases a system’s analog input and output channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Dante-enabled Symetrix DSP units, each of the four analog inputs’ parameters (5 gain levels, phantom power) and four analog outputs’ parameters (mute), along with bus assignments, are configured using Symetrix Composer open architecture software. xIO 4x4 set up is logical and fast with no requirement to use third party software; there are no mechanical switches or circuit board jumpers to set. Systems are simpler, cost less, and have fewer potential points of failure. A half-rack form factor conserves rack space, or, if preferred, the xIO 4x4 may be surface mounted. Features
  • Audio input (A/D), output (D/A) expander for systems that capitalizes on the surplus DSP of a Dante-enabled Symetrix DSP unit to bring
  • overall system costs down.
  • 4 mic/line inputs, including +48 VDC phantom power, and 4 line outputs with the industry leading performance specifications of Edge and Radius.
  • Configured with Symetrix Composer. No third party software, archaic DIP switches, or complicated front panel menus.
  • Network audio expansion using Dante protocol over standard IT networks. Ultra low latency.
  • Rack mount and surface mount kits sold separately.
    I/O Interfaces
  • Dante Ch: 4x4
  • 24-bit
See the product