Mansion – DIR1222A


More details

Similar Products

slmcrw2|product_detail_x2_desktop_SL_Multi_Channel_Receiver_Sennheiser_01
  • Sennheiser

Sennheiser – SL MCR DW

The SpeechLine Multi-Channel Receiver with its 10 variants in 2 or 4 channels is the perfect addition to the SpeechLine series. Thanks to its unobtrusive design, the Multi-Channel Receiver can be installed quickly and easily in any room, whether on the wall or ceiling. The device can be operated with a single network cable, thanks to PoE and Dante. Complex analog audio cabling is a thing of the past.

The Multi-Channel Receiver also offers a convenient solution for existing installations. Thanks to an integrated auto mixer and the analog mix output, all audio channels can be used simply as a sum signal. The audio mix is also available digitally via Dante, which allows an extension of the existing setup without exchanging the DSP.

Due to the bidirectional communication between receiver and transmitter, all settings of the mobile transmitters can easily be made in the Sennheiser Control Cockpit. The receiver’s automatic frequency management eliminates the need for manual frequency settings and the automatic interference management guarantees maximum transmission reliability.

The user-friendly pairing function ensures a reliable connection between transmitter and receiver. Network integration also makes it possible to remotely control and monitor the receiver via a media control system (e.g. AMX, Crestron). Due to the integrated antennas, a complex antenna installation is no longer necessary.

Features

  • Automatic Gain Control
  • Automatic Frequency management
  • AES 256 encryption
  • 2-port Dante
  • PoE
  • Analog Mix Output
  • One status LED per Link
  • Remote control via Control Cockpit or media control
  • Wall, ceiling or mic stand mounting
  • Integrated Automixer

The SL MCR DW comes in 10 variants

  • SL MCR 2 DW-3 (2 channel EU)
  • SL MCR 2 DW-4 (2 channel US)
  • SL MCR 2 DW-5 (2 channel Japan)
  • SL MCR 2 DW-6 (2 channel Taiwan)
  • SL MCR 2 DW-7 (2 channel Brazil)
  • SL MCR 4 DW-3 (4 channel EU)
  • SL MCR 4 DW-4 (4 channel US)
  • SL MCR 4 DW-5 (4 channel Japan)
  • SL MCR 4 DW-6 (4 channel Taiwan)
  • SL MCR 4 DW-7 (4 channel Brazil)

    I/O Interfaces
radial-dinet-dan-rx_600px
  • Radial Engineering

Radial – DiNet DAN-RX

The DiNET DAN-RX is a 24-bit/96 kHZ digital to analog endpoint that allows users to output audio from a Dante network to stereo systems.  The DiNET DAN-RX is a 24-bit/96 kHZ digital to analog endpoint that allows users to output audio from a Dante network to stereo systems. It is equipped with left and right balanced XLR outputs with a level control that allows for connection to microphone inputs up to +4 dBu line level systems. A local 3.5 mm headphone output is provided to test or monitor audio before connection to a PA system.
    I/O Interfaces
alcorn-mcbride_VP16PCB_circuit_board_600px|alcorn-mcbride_VP16PCB_circuit_board_600px
  • Alcorn McBride

Alcorn McBride – V-Page VP16PCB

VPage provides facility-wide intelligent paging using Dante audio networks. The configuration of your paging network, such as Q-Sys, is completely programmable using the software in the DSP system. This includes zone assignments, button and light behaviors and zone priorities. Each VPage station includes user-programmable illuminated buttons, microphone input, and level control. An expansion connector allows for an additional 16 illuminated pushbuttons. A single Ethernet cable carries audio, power, and control between the VPage station and the equipment rack. A facility may incorporate an unlimited number of VPage stations by simply connecting them to PoE enabled network switches. The VP16PCB is the circuit board only, for mounting in custom PA stations.
    I/O Interfaces