Dante-enabled Product Catalog

Audio DSP and amplified loudspeaker controller; 4 channels sharing 4800W with Dante and AVB. Key Features

• Powerful onboard DSP with ample headroom for large systems – the equivalent of a TesiraFORTÉ for Tesira custom processing and hosting of expanders
• 4 class D channels sharing 4800 watts
• Power sharing provides up to 75% of total power or 3600 W through any single channel
• High peak voltage output capability: 237 Vpk
• Each channel can drive low impedance (2.7, 4, 8, and 16 ohm), 70V, or 100V
• Each model supports AVB, Dante, and AES67
• Accurate raised cosine EQ for the entire frequency band
• Group-controlled raised cosine EQ making it attractive for tuning large systems
• Comprehensive amplifier limiter scheme avoids protective mutes and shutdowns
• Processor can be sustained through POE – no main power required and no reboots
• Support for failover-to-analog from networked audio input operation
• 5-year warranty
• Compliant with the US Trade Agreement Act (TAA)
• Biamp Workplace Ready

Audio DSP and Amplified Loudspeaker Controller - 4 Channels sharing 600W with Dante & AVB. Key Features

• Powerful onboard DSP with ample headroom for large systems – the equivalent of a TesiraFORTÉ for Tesira custom processing and hosting of expanders
• 4 class D channels sharing 600 watts
• Power sharing provides up to 75% of total power or 450 W through any single channel
• High peak voltage output capability: 145 Vpk
• Each channel can drive low impedance (2.7, 4, 8, and 16 ohm), 70V, or 100V
• Each model supports AVB, Dante, and AES67
• Accurate raised cosine EQ for the entire frequency band
• Group-controlled raised cosine EQ making it attractive for tuning large systems
• Comprehensive amplifier limiter scheme avoids protective mutes and shutdowns
• Processor can be sustained through POE – no main power required and no reboots
• Support for failover-to-analog from networked audio input operation
• 5-year warranty
• Compliant with the US Trade Agreement Act (TAA)
• Biamp Workplace Ready

4-channel amplified loudspeaker controller, 4800 Watts total power. Key Features

• Audio DSP and amplified loudspeaker controller plus some headroom for Tesira custom processing and hosting of expanders
• 4 class D channels sharing 1200 watts
• Power sharing provides up to 75% of total power or 3600 W through any single channel
• High peak voltage output capability: 237 Vpk
• Each channel can drive low impedance (2.7, 4, 8, and 16 ohm), 70V, or 100V
• Each model supports AVB, Dante, and AES67
• Accurate raised cosine EQ below 160 Hz
• Group-controlled raised cosine EQ making it attractive for tuning large systems
• Comprehensive amplifier limiter scheme avoids protective mutes and shutdowns
• Processor can be sustained through POE – no main power required and no reboots
• Support for failover-to-analog from networked audio input operation
• 5-year warranty
• Compliant with the US Trade Agreement Act (TAA)
• Biamp Workplace Ready

Audio DSP and amplified loudspeaker controller; 2 channels sharing 1200W with Dante and AVB. Key Features

• Powerful onboard DSP with ample headroom for large systems – the equivalent of a TesiraFORTÉ for Tesira custom processing and hosting of expanders
• 2 class D channels sharing 1200 watts
• Power sharing provides up to 83% of total power or 1000 W through any single channel
• High peak voltage output capability: 145 Vpk
• Each channel can drive low impedance (2.7, 4, 8, and 16 ohm), 70V, or 100V
• Each model supports AVB, Dante, and AES67
• Accurate raised cosine EQ for the entire frequency band
• Group-controlled raised cosine EQ making it attractive for tuning large systems
• Comprehensive amplifier limiter scheme avoids protective mutes and shutdowns
• Processor can be sustained through POE – no main power required and no reboots
• Support for failover-to-analog from networked audio input operation
• 5-year warranty
• Compliant with the US Trade Agreement Act (TAA)
• Biamp Workplace Ready

Audio DSP and amplified loudspeaker controller; 4 channels sharing 2400W with Dante and AVB. Key Features

• Powerful onboard DSP with ample headroom for large systems – the equivalent of a TesiraFORTÉ for Tesira custom processing and hosting of expanders
• 4 class D channels sharing 2400 watts
• Power sharing provides up to 75% of total power or 1800 W through any single channel
• High peak voltage output capability: 160 Vpk
• Each channel can drive low impedance (2.7, 4, 8, and 16 ohm), 70V, or 100V
• Each model supports AVB, Dante, and AES67
• Accurate raised cosine EQ for the entire frequency band
• Group-controlled raised cosine EQ making it attractive for tuning large systems
• Comprehensive amplifier limiter scheme avoids protective mutes and shutdowns
• Processor can be sustained through POE – no main power required and no reboots
• Support for failover-to-analog from networked audio input operation
• 5-year warranty
• Compliant with the US Trade Agreement Act (TAA)
• Biamp Workplace Ready

Audio DSP and Amplified Loudspeaker Controller - 4 Channels sharing 1200W with Dante & AVB. Key Features

• Powerful onboard DSP with ample headroom for large systems – the equivalent of a TesiraFORTÉ for Tesira custom processing and hosting of expanders
• 4 class D channels sharing 1200 watts
• Power sharing provides up to 75% of total power or 900 W through any single channel
• High peak voltage output capability: 145 Vpk
• Each channel can drive low impedance (2.7, 4, 8, and 16 ohm), 70V, or 100V
• Each model supports AVB, Dante, and AES67
• Accurate raised cosine EQ for the entire frequency band
• Group-controlled raised cosine EQ making it attractive for tuning large systems
• Comprehensive amplifier limiter scheme avoids protective mutes and shutdowns
• Processor can be sustained through POE – no main power required and no reboots
• Support for failover-to-analog from networked audio input operation
• 5-year warranty
• Compliant with the US Trade Agreement Act (TAA)
• Biamp Workplace Ready

4-channel amplified loudspeaker controller, 1200 watts total power. Key Features

• Audio DSP and amplified loudspeaker controller plus some headroom for Tesira custom processing and hosting of expanders
• 4 class D channels sharing 1200 watts
• Power sharing provides up to 75% of total or 900 W power through any single channel
• High peak voltage output capability: 145 Vpk
• Each channel can drive low impedance (2.7, 4, 8, and 16 ohm), 70V, or 100V
• Each model supports AVB, Dante, and AES67
• Accurate raised cosine EQ below 160 Hz
• Group-controlled raised cosine EQ making it attractive for tuning large systems
• Comprehensive amplifier limiter scheme avoids protective mutes and shutdowns
• Processor can be sustained through POE – no main power required and no reboots
• Support for failover-to-analog from networked audio input operation
• 5-year warranty
• Compliant with the US Trade Agreement Act (TAA)
• Biamp Workplace Ready

8-channel amplified loudspeaker controller, 1200 watts total power. Key Features

• Audio DSP and amplified loudspeaker controller plus some headroom for Tesira custom processing and hosting of expanders
• 4 class D channels sharing 1200 watts
• Power sharing provides up to 50% of total power or 1200 W through any single channel
• High peak voltage output capability: 145 Vpk
• Each channel can drive low impedance (2.7, 4, 8, and 16 ohm), 70V, or 100V
• Each model supports AVB, Dante, and AES67
• Accurate raised cosine EQ below 160 Hz
• Group-controlled raised cosine EQ making it attractive for tuning large systems
• Comprehensive amplifier limiter scheme avoids protective mutes and shutdowns
• Processor can be sustained through POE – no main power required and no reboots
• Support for failover-to-analog from networked audio input operation
• 5-year warranty
• Compliant with the US Trade Agreement Act (TAA)
• Biamp Workplace Ready

4-channel amplified loudspeaker controller, 2400 watts total power. Key Features

• Integrated DSP provides essential capabilities for loudspeaker management
• Up to 4800 W in single RU
• Up to 8 channels in single RU
• No central resource to limit system size
• High peak voltage output capability (up to 237Vpk)
• Power sharing provides up to 75% of total power through any single channel
• Each model supports AVB, Dante, and AES67
• Each channel can drive low impedance (2.7, 4, 8, and 16 ohm), 70V, or 100V
• Onboard processing means system cost scales with power requirements
• The ALAMOS loudspeaker profile library, with nearly 700 unique profiles covering over 200 Biamp models, saving valuable time during design and deployment
• Group-controlled raised cosine EQ making it attractive for large systems
• Accurate raised cosine EQ for the entire frequency band
• Comprehensive limiter scheme avoids protective mutes and shutdowns
• Processor can be sustained through PoE during power failures, avoiding reboots
• Support for failover-to-analog operation
• Wide dynamic range
• 5-year warranty
• Compliant with the US Trade Agreement Act (TAA)
• Biamp Workplace Ready

8-channel amplified loudspeaker controller, 2400 watts total power. Key Features

• Audio DSP and amplified loudspeaker controller plus some headroom for Tesira custom processing and hosting of expanders
• 4 class D channels sharing 1200 watts
• Power sharing provides up to 50% of total power or 1200 W through any single channel
• High peak voltage output capability: 237 Vpk
• Each channel can drive low impedance (2.7, 4, 8, and 16 ohm), 70V, or 100V
• Each model supports AVB, Dante, and AES67
• Accurate raised cosine EQ below 160 Hz
• Group-controlled raised cosine EQ making it attractive for tuning large systems
• Comprehensive amplifier limiter scheme avoids protective mutes and shutdowns
• Processor can be sustained through POE – no main power required and no reboots
• Support for failover-to-analog from networked audio input operation
• 5-year warranty
• Compliant with the US Trade Agreement Act (TAA)
• Biamp Workplace Ready

Audio DSP and Amplified Loudspeaker Controller - 2 Channels sharing 2400W with Dante & AVB. Key Features

• Powerful onboard DSP with ample headroom for large systems – the equivalent of a TesiraFORTÉ for Tesira custom processing and hosting of expanders
• 2 class D channels sharing 2400 watts
• Power sharing provides up to 83% of total power or 2000 W through any single channel
• High peak voltage output capability: 160 Vpk
• Each channel can drive low impedance (2.7, 4, 8, and 16 ohm), 70V, or 100V
• Each model supports AVB, Dante, and AES67
• Accurate raised cosine EQ for the entire frequency band
• Group-controlled raised cosine EQ making it attractive for tuning large systems
• Comprehensive amplifier limiter scheme avoids protective mutes and shutdowns
• Processor can be sustained through POE – no main power required and no reboots
• Support for failover-to-analog from networked audio input operation
• 5-year warranty
• Compliant with the US Trade Agreement Act (TAA)
• Biamp Workplace Ready

The DCA901 opens new possibilities for capturing sound in broadcast and media production. This compact digital broadcast microphone array delivers eight channels of high-fidelity audio through a single network cable. Steerable pickup zones isolate the sounds that matter while minimizing ambient noise. With built-in DSP, fewer cables, and faster setup, it replaces bulky analog systems while supporting experiential, story-driven sound and modern production workflows.

• Capture up to eight isolated audio channels from a single broadcast array microphone
• Steerable lobes let you virtually adjust pickup zones, reducing mic count and eliminating the need to reposition gear
• A single Dante or AES67 connection delivers audio, power, and control, simplifying routing and minimizing failure points
• Built-in DSP handles EQ, compression, delay, and automixing, giving you more time to focus on creative sound design
• Actively supports REMI workflows and alternate feeds with flexible routing and remote lobe control
• Presets streamline deployments and ensure consistent configurations across shows or seasons
• Supports seamless 5.1 immersive capture and stereo conversion for both modern and legacy formats
• Low profile design installs cleanly in stadiums, studios, or mobile setups and blends into camera-ready environments

The Trinnov Amplitude16 is a 16-channel Class D power amplifier designed for high-performance home theater, and with the optional Dante® input board it becomes a fully networked amplification solution. This upgrade enables direct AoIP connectivity, allowing the amplifier to receive digital audio streams from processors like the AltitudeCI without any analog conversion. Both products share the same high-performance DAC architecture, ensuring identical conversion quality and seamless sonic consistency, even when the DAC stage is relocated closer to the loudspeakers. With support for bridging channels to deliver higher power where needed, the Amplitude16 offers unmatched flexibility, from driving LCRs to powering multi-subwoofer WaveForming™ arrays. Compact yet powerful, it provides integrators with a streamlined, all-digital signal path that reduces cabling complexity while maintaining audiophile standards. Together with the AltitudeCI, the Amplitude16 Dante® forms the backbone of a complete, scalable, and networked home theater ecosystem

The Trinnov AltitudeCI is a new-generation AV processor designed for home theater and custom installation, built from the ground up around Audio over IP. Supporting both Dante® (hardware) and Ravenna/AES67 (software), it offers unmatched interoperability: plug-and-play simplicity for residential theaters and compatibility with Dolby media servers. AltitudeCI provides up to 32 channels today, expandable to 64 in 2026, with a modular licensing model that allows integrators to scale in 2-channel increments. Its architecture enables hybrid routing across analog, AES/EBU, and AoIP outputs, while three independent Ethernet ports (RJ45 + dual SFP) provide redundant, segregated, or switch-mode networking for maximum flexibility. Combined with Trinnov’s exclusive technologies, Optimizer™, WaveForming™, and Remapping™, AltitudeCI ensures uncompromising performance with the flexibility and efficiency of a fully digital signal chain. Paired with the Amplitude16 Dante® amplifier, it forms a complete end-to-end AoIP ecosystem.

he Gateway 4 is a powerful DSP-based 1RU IP codec designed for live remote broadcasting applications, as well as STL or SSL links. It can route compressed and uncompressed IP audio streams throughout the broadcast plant with native support for AES67, ST 2110-30, ST 2022-7, RAVENNA, Livewire+, AMWA NMOS IS-04 and IS-05, Ember+, AES3 and analog I/O as standard. An optional Dante or WheatNet-IP card is also available. This facilitates acting as a media converter to simplify audio routing between a range of equipment using proprietary AoIP protocols like WheatNet-IP, Dante and Livewire, plus devices supporting RAVENNA, AES67 and ST 2110-30. It supports 4 full-duplex audio channels to provide two stereo connections, or one stereo and two mono connections, or up to 4 mono connections. It also supports multiple unicasting to 20 endpoints and multicasting. Configure with the built-in embedded HTML5 Toolbox Web-GUI interface or Tieline’s Cloud Codec Controller.

The Gateway is a DSP-based IP codec which can transport 16 channels across the public internet and any QoS-enabled IP network. It can route compressed and uncompressed IP audio streams throughout the broadcast plant with native support for AES67, ST 2110-30, ST 2022-7, RAVENNA, Livewire+, AMWA NMOS IS-04 and IS-05, Ember+, AES3 and analog I/O as standard. An optional Dante or WheatNet-IP card is also available. This facilitates acting as a media converter to simplify audio routing between a range of equipment using proprietary AoIP protocols like WheatNet-IP, Dante and Livewire, plus devices supporting RAVENNA, AES67 and ST 2110-30. It supports 16 full-duplex audio channels as well as multiple unicasting to 80 endpoints and multicasting. Transport of phase-locked multichannel audio in 5.1 or 7.1 formats is also supported. Configure with the built-in embedded HTML5 Toolbox Web-GUI interface or

Dante / AES67 Network Volume Control

• Rotary Encoder Volume Control with Full-Color LCD Display
• Attenuation Applied to One or Two Dante/AES67 Audio Channels
• Network Audio Channels are Routed Through the D*-NVC2
• Knob Rotation Adjusts Audio Volume Up or Down
• Attenuation Adjustment in 1 dB Steps From 0 to 63 dB then Mute
• Programmable Knob Action Acceleration
• Momentary Knob Push to Mute/Unmute with Screen Indication
• Extended Knob Push to Open Menu
• Menu Allows User to Adjust Output Channel A, B or Both
• Option to Sum Stereo Input to Mono on Outputs A and B Using RDL CONSOLE
• Installer Sets Menu Default and Defines Channel Names Using RDL CONSOLE
• The D-NVC2 May be Remote Controlled by RDL D-NMC1R or D-NLC1R
• Selectable Screen Display Color Themes Using RDL CONSOLE
• Adjusts Levels of Network Audio Signals Routed Through It*
• Displays Audio Attenuation Level Applied to Routed Signals*
• PoE Powered
• Available in Stainless Steel, Black and White

Features:

• 5400W continuous RMS power across 4 × 4 channels
• 4 × 4 channel configuration for multi-zone/immersive setups
• Onboard DSP with intuitive touchscreen interface
• 1G TCP/IP networking with Dante™ enabled protocol support
• Engineered & Made in India for worldwide applications

Features:

• 15000W continuous RMS power for maximum output
• 2 × 2 channel amplifier with Class H+ efficiency
• Digital touchscreen control with onboard DSP
• Dante™ enabled network protocol support with 80 presets
• Made in India with global performance standards

Features:

• 9000W continuous RMS power
• 2 × 2 channels with digital touchscreen control
• Onboard DSP with up to 80 presets
• Dante™ enabled network protocol support
• Proudly Made in India – built for the world stage

A compact A/V switcher in the EasyIP ecosystem, the EasyIP Dock connects in EasyIP cameras, video, and audio to a computer while simultaneously extending that computer’s HDMI output over the network for flexible presentation and conferencing spaces. Features:

• Manages up to four EasyIP cameras or EasyIP video sources with switching and camera control
• 1080p/60 video over USB 3.0 with USB 2.0 backwards compatibility and AEC
• HDMI In converts to EasyIP output for networked extension with simultaneous HDMI output loop
• 8x8 Dante audio matrix (15x13 full cross-point audio matrix)
• EasyIP Multicast allows content sharing with any number of EasyIP endpoints or destinations

The MXW neXt wireless microphone system is the next step in audio for hybrid events. With state-of-the-art wireless transmission, convenient rechargeability, powerful audio processing, and flexible controls and connections, it’s the most versatile wireless audio solution for collaboration. The Microflex® Wireless neXt system is the perfect solution for meeting rooms with flexible seating, rooms where audio cables are impractical, or rooms that are used only occasionally. The MXW neXt wireless microphone system delivers flawless audio for the people in the room and those joining remotely, whether it’s a presentation, team conference, or training session. MXW neXt eliminates inconvenient audio cables, allowing you to place microphones where you want them, when you want them. Wireless microphones accommodate any table arrangement or meeting format, whether it’s a presentation, panel discussion, or board meeting. With a choice of rechargeable transmitters that eliminate the need for disposable batteries, powerful IntelliMix DSP for outstanding sound quality, and the ability to extend audio coverage in larger rooms, MXW neXt is the premier wireless audio solution for meeting and training rooms.

The MXW neXt wireless microphone system is the next step in audio for hybrid events. With state-of-the-art wireless transmission, convenient rechargeability, powerful audio processing, and flexible controls and connections, it’s the most versatile wireless audio solution for collaboration. The Microflex® Wireless neXt system is the perfect solution for meeting rooms with flexible seating, rooms where audio cables are impractical, or rooms that are used only occasionally. The MXW neXt wireless microphone system delivers flawless audio for the people in the room and those joining remotely, whether it’s a presentation, team conference, or training session. MXW neXt eliminates inconvenient audio cables, allowing you to place microphones where you want them, when you want them. Wireless microphones accommodate any table arrangement or meeting format, whether it’s a presentation, panel discussion, or board meeting. With a choice of rechargeable transmitters that eliminate the need for disposable batteries, powerful IntelliMix DSP for outstanding sound quality, and the ability to extend audio coverage in larger rooms, MXW neXt is the premier wireless audio solution for meeting and training rooms.

Yealink AP08 DSP, a cutting-edge digital signal processor, elevates your meeting experience with exceptional automation capabilities. It supports up to 16x16 Dante audio channels, including 8 optimized channels with dynamic AEC, intelligent noise cancellation, and reverberation suppression, as well as 4x4 analog audio channels and two simultaneous USB 3.0 Type-B device interfaces. The AP08 DSP ensures smooth audio transmission and crystal-clear communication. Additionally, it provides PoE+ power for up to three audio devices, simplifying your deployment even further. With Yealink Room Designer software, the AP08 DSP seamlessly integrates automated design and acoustic environment-adaptive technology, setting a new standard for audio quality and convenience in your meetings. Choose Yealink AP08 DSP for an unparalleled audio experience.

The CS10-D ceiling speaker is available in two editions to suit various needs. Featuring support for the Dante audio transmission protocol, the CS10-D seamlessly integrates with a wide range of standard Dante devices, delivering a versatile and convenient collaborative experience. The Loudspeaker features a low-profile (120mm depth) 2-way coaxial design and a removable magnetic suction mesh cover*. The CS10 blends high-quality audio with an elegant, minimalist design, making it a perfect match for contemporary conference rooms.

With 127 wide-range microphones, the Yealink CM50 provides superior audio coverage within a 5-meter radius*. Its advanced beamforming technology supports customized pickup zones, allowing precise control over audio capture and reducing unwanted background noise. The CM50 integrates AI-based sound optimization to ensure immersive sound quality. With support for Dante protocol , it ensures easy integration with other Dante-compatible devices.

The Microflex MXN-6 Networked Pendant Loudspeaker provides high-quality speech reproduction for AV conferencing applications. The PoE-powered MXN-6 is the ideal loudspeaker solution when used as part of a Shure networked conferencing audio system. Combined with Microflex Advance Array Microphones and IntelliMix® DSP solutions, the full Shure Microflex Ecosystem delivers premium audio performance with an unmatched ease of deployment.