NetPA U 2008 FX

Product Information

The Extron NetPA U 2008 FX is an eight channel, high performance Dante-enabled power amplifier with software configurable outputs that can simultaneously drive 8 ohm, 4 ohm, 70V, or 100V loads in multi-zone systems. For maximum flexibility, the total power of two adjacent 200 watt channels is shared, delivering up to 400 watts per single channel, according to system requirements. With its integrated DSP, the NetPA U 2008 FX includes essential signal processing for complex, decentralized systems while AES67 support ensures compatibility with other network audio devices. This Ecofficient Level 2 design features InstaWake, the ability to go from standby to full power in under 50 milliseconds. The fan cooled 1U enclosure does not require empty rack spaces for ventilation and includes front and rear rack mount hardware for stability.

Specifications

Sample Rate: 48kHz
AES67 Enabled

Australian Monitor – IS2250P

The IS2250P is a Dual Channel 250W amplifier for low impedance and 70/100V Systems. Featuring ethernet control, DSP and ErP standby compliance. The IS2250P is a Dual Channel 250W amplifier for low impedance and 70/100V Systems. Featuring ethernet control, DSP and ErP standby compliance. The ISP series is Australian Monitor's premium offering of multichannel Class D power amplifiers, delivering high quality audio reinforcement in the following options - Dual channel 120W or 250W and Quad channel 120W or 250W. Featuring Ethernet control, Full Featured DSP, ErP Low Power Standby, Dante® support and efficient Class D amplifiers. The ISP also features an embedded User Interface which can be accessed from any device supporting an HTML5 compliant web browser.

Amplifiers

See the product

Blustream

Blustream – NPA100DA

The NPA100DA features a 2x 50W digital amplifier (1 x 100W mono) or 70V / 100V hi-level constant voltage output, dedicated LFE subwoofer output, Dante audio integration and 2ch balanced / un-balanced audio outputs.

Amplifiers

See the product

ashly-nXe-4002_600px|ashly-nXe-4002_600px

Ashly Audio

Ashly – nXe4002bd

The nXe4002bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 400W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit is Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.

Amplifiers

See the product

NetPA U 2008 FX

Product Information

Specifications

Similar Products

Australian Monitor – IS2250P

Blustream – NPA100DA

Ashly – nXe4002bd

Stay connected to Dante

Support

Company

Dante Networking Alliance