Cart
← Back to Product Catalog

600.4D PowerZone Connect PRO

Amplifiers

More Details

Similar Products

nXe-3.02_600px
  • Ashly Audio

Ashly – nXe3.02bd

The nXe3.02bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
See the product
Bittner_Audio_4Xi_500x104
  • Bittner Audio

Bittner – 4X 1200i

The Bittner 4Xi power amplifier is available in 2 models, the 4X 1200i and 4X 2000i (with 4 x 1200 watt and 4 x 2000 watts @ 4 ohms respectively), and offers rear controls, analog or digital inputs, XLR or Phoenix input connectors, Speakon or Phoenix output connectors – the concept of the 4X is as flexible as its applications. Also available are audio networking via Dante™ and control via Ethernet (with SXL II) offering worldwide diagnostics and maintenance via the Internet The 4Xi and the front control version, the 4Xe, both offer the following specifications:
  • Up to 4x 2000 W in only 2 RU
  • Impedance measurement
  • Selectable Clip Limiter (hard/soft)
  • 4-channel Dante Inputs
  • SXL II Dataport (RS485)
  • High Tech SMT Design
  • Excellent sound and superior impulse response
  • 2 separate stereo amplifiers
  • Ready for 2 Ohm operation
  • Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
  • XLR inputs and Speakon outputs (e version)
  • Phoenix in- and outputs (i version)
  • High-End switched power supply with PFC
  • LED indicators for SIGNAL, CLIP, PROTECT, POWER
  • Temperature controlled, variable speed low noise fans
  • Digital wear-free Volume Controls (can be operated manually)
  • Selectable Stereo/Bridged Mode
  • Softstart
  • Sequential Remote Power On
  • 2 Alive Contacts
  • 3 Years Warranty
    Amplifiers
See the product
stewart-audio-CVA16-1-CV_1200px|stewart-audio-CVA16-1-CV_1200px
  • Stewart Audio

Stewart Audio – CVA50-1-CV-D

The CVA50-1-CV-D (16W x 1 @ 70/100V) is a single cable PoE+ Dante power amplifier in a compact, plenum rated enclosure. Power and Dante over CAT5e/6 cable, simply plug and play. The PoE+ Amplifier Series leverages the higher power 802.3at PoE+ standard to power two amplifier models, the AV8-2-LZ-D (8W x 2 @ 4/8Ω) and the CVA16-1-CV-D (16W x 1 @ 70V/100V). These compact Dante™ amplifiers are designed to be single cable solutions for smaller zones without the need for a local power outlet. This amplifier series leverages the ubiquitous nature of existing CAT 5e/6 cable in zones and also the inexpensive process of pulling new cable to zones. It creates an opportunity to reduce labor costs with a single, reliable, twisted pair cable that carries power and data to where you need it. Simply plug the PoE+ CAT 5e/6 cable into the amplifier, wire the speakers and route audio and repeat for the next zone. The plenum rating and compact size, allows this amplifier series to be placed in the air handling space, closets, the rack or any other convenient space.
    Amplifiers
See the product