Cart
← Back to Product Catalog

Asystems – DMA8825D

Amplifiers

Similar Products

williams-sound-dl_207_net_d
  • Williams AV

Williams Sound – DL210 NET D 2.0

The Digi-Loop’s amplifier design offers dual 12 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users. Digi-Loop is definitely state-of-the-art – the first of its kind to maximize modern amplifier technology. Its network-control capability provides seamless, remote system set-up, operation and monitoring via laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression and more. Powerful Class D, pulse-width amplifiers maximize efficiency. The Digi-Loop’s amplifier design offers dual 12 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users. System includes: (1) DL 210 NET D 2.0 Loop Amplifier (1) WLC 004 Line Cord (US) (1) IDP 009 ADA Wall Plaque (t-coil)
    Amplifiers
  • Dante Ch: 2x0
  • 24-bit
See the product
panasonic-wp-dn700|panasonic-wp-dn700
  • Panasonic Connect

Panasonic – WP-DN700

The WP-DN700 is a digital amplifier with high efficiency and high reliability design.  The 2U size achieves a total output of 2000 W or more in total.  Digital amplifier with high efficiency and high reliability design. 
  • WP-DN 700 is 2 ch power amplifier with maximum output 1000 W × 2 (4 Ω load). 
  • Due to the adoption of class D amplifier circuit and switching power supply, power loss is greatly reduced and space saving is realized. 
  • Equipped with a muting circuit to prevent pop noise when turning on / off the power switch. 
  • Overcurrent protection circuit that prevents overdrive in case of overload · output short circuit, equipped with overtemperature protection circuit to prevent abnormal heating of the power supply circuit · output circuit. 
  • Speaker protection circuit protects the speaker by cutting off the output when the output circuit fails. 
  • Equipped with protect indicator lights, inform the operating status of the protection circuit and system oscillation (when signals exceeding 20 kHz are continuously input). 
  • Corresponds to EIA rack mount. 
  • BTL (Bridged Trans- connect) connection that uses output of 2 ch as output of 1 ch can be used as a power amplifier of 1120 W × 2 (8 Ω load) with WP-DN 360.
    Amplifiers
See the product
linea-research-44Cxx-dante
  • Linea Research

Linea Research – 44C10-Dante

The Linea Research 44C10-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all channels driven the 44C10-DANTE delivers 2500W per channel into 2 Ohms , 2500W per channel into 4 Ohms, 1500W per channel into 8 Ohms or 70 volt. The Linea Research 44C10-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all channels driven the 44C10-DANTE delivers 2500W per channel into 2 Ohms , 2500W per channel into 4 Ohms, 1500W per channel into 8 Ohms or 70 volt. Linea research 44C Series amplifiers offer 4-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.
    Amplifiers
  • Dante Ch: 4x0
  • 96kHz
See the product