Cart
← Back to Product Catalog

SD2140 Network Power Amplifier

Amplifiers

More Details

Similar Products

K-array_-_KA24|K-array_-_KA24
  • K-array

K-array – KA24

The KA24 is part of the K-array KA line of power amplifiers. It's a 4 channel per 500W on 4 Ohm all-in-one amp. It has 4 fully independent and configurable channels. The KA24 is part of the K-array KA line of power amplifiers. It's a 4 channel per 500W on 4 Ohm all-in-one amp. It has 4 fully independent and configurable channels. The integrated DSP offers EQ, Matrix, Levels, Delays and Limiter functions on every channel.  The KA24 is usable as a mixer for fixed installations thanks to the microphone and Phantom power options available on every analog IN. 2 GPIO ports give easy external analog controls using K-array accessories. All DSP functions are remote controlled via the K-framework software over RS485 (3-pin XLR) or integrated USB connector. The KA24 features optical limiters an protection against over temperature, over current and short circuits.  
    Amplifiers
See the product
X8_front_shadow|X8_front_shadow
  • Powersoft

Powersoft – X8

Powersoft X8 innovates and evolves the concept of the amplification platform though the integration of a worldwide compatible power-box and a full feature DSP inside the power amplifier.
    Amplifiers
See the product
ashly-nXp-4002_600px|ashly-nXp-4002_600px
  • Ashly Audio

Ashly – nXp4002d

The nXp4002d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 400W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
See the product