Cart
← Back to Product Catalog

4000.4D PowerZone Connect PRO

Amplifiers

More Details

Similar Products

nexo-NXAMP4x1mk2-NXAMP4x2mk2
  • Nexo

NEXO – NXAMP4x1 MK2

The new NXAMP4x1 MK2 and NXAMP4x2 MK2 present NEXO expertise in DSP control in lighter, sleeker 2U packages with front panel touch screen control enabling faster and easier navigation, and giving direct access to all essential parameters. The new NXAMP4x1 MK2 and NXAMP4x2 MK2 present NEXO expertise in DSP control in lighter, sleeker 2U packages with front panel touch screen control enabling faster and easier navigation, and giving direct access to all essential parameters including: Array EQ, Mute and Meters, EQ Detail, User EQ, Inputs, Load Monitoring, Log, Scene, Setup, System Headroom, as well as Volume, Gain and Delays. A native, dual Ethernet port offers seamless integration with NEXO proprietary NeMo system management software. Amplifiers can be remote-controlled and daisy-chained via a standard Remote Control card with optional Dante, EtherSound and AES/EBU network cards available. Four high-end analog inputs use cascaded converters for low output noise, and four digital inputs are available through the rear panel expansion card slot offering optional AES/EBU, EtherSound™, Dante™ or AES67 inputs, all with automatic analog fall-back. In addition to the expansion card slot, other rear panel connectivity includes RS232 serial and GPIO ports along with Speakon outputs for each of the four channels. Available in 4 x 1300W and 4 x 2500W @ 2 ohms and weighing in at just 35 lbs. and 36.5 lbs., respectively, the ultra-low distortion Class D amplifiers combine 32-bit/96KHz converters and 64-bit signal processing to deliver significant advances in sound quality over the already highly-regarded original NXAMPs. They feature a universal power supply (100 - 240 Volts) using PFC (Power Factor Correction) technology for maximum efficiency and smooth current draw.
    Amplifiers
  • Dante Ch: 4x0
  • 24-bit
See the product
mansion-PLA2DI_600px
  • Mansion

Mansion – PLA2DI

PLA2DI power amplifier provides 120W output power per channel into 4Ω and 8Ω, the amplifier can also be bridged to supply up to 240W output power into 70V or 100V. PLA2DI power amplifier provides 120W output power per channel into 4Ω and 8Ω, the amplifier can also be bridged to supply up to 240W output power into 70V or 100V. Designed in Class D amplification with the slot card of Dante interface, accepts the Audio signal from the Dante network. With the compact housing, PLA2DI provides the excellent sound and reliable quality for many install projects. Features
  • Two Channels Model – 120W RMS
  • Stereo into 4-8 Ohm loads
  • Bridged mode 240W output for 70V or 100V (Direct Drive)
  • Power down after ~15 minutes of no signal and comply with Energy Star Power consumption limits of < 0.5W in standby
  • Yellow LED (Front Panel) to indicated Standby mode is active
  • Terminal Block analog audio inputs
  • Selection for Power-Up mode
  • Switch for High Pass Filter
  • Natural cooling without Fan
  • TRIGGER could be external remoting ON/OFF
  • Short circuit protection
  • Overheating protection
    Amplifiers
See the product
C7_2_Front_cutout-e1625059525295
  • Ampetronic

Ampetronic – C7-2 Dante

The C7-2 Series hearing loop drivers from Ampetronic mark a substantial development in assistive listening technology. C-Series units feature digital signal processing and enable fast, accurate setup and adjustment via a very simple and easy to use user interface.
    Amplifiers
  • AES67 Enabled
See the product