Cart
← Back to Product Catalog

Inter-M – PMU 240N

Amplifiers

More details

Similar Products

ashly-nXe-1.54_600px|ashly-nXe-1.54_600px
  • Ashly Audio

Ashly – nXe1.54bd

The nXe1.54bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors is Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 4x0
See the product
stewart-audio-mc850
  • Stewart Audio

Stewart Audio – MC850-LZ-D

The MC850-LZ-D is an 8 channel, 4/8 Ohm, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-LZ-D amplifier supports Dante™ audio and has AES67 support. The MC850-LZ-D is an 8 channel, 4/8 Ohm, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-LZ-D amplifier supports Dante™ audio and has AES67 support. The MC850 family embodies the future of smart amplification with networked audio inputs, Ethernet configuration, control and reporting and flexible power allocation between channels. Whether it’s low impedance, 70V/100V or a mix of the two, there is a model for you with 8 channels and a total of 400W. Setup and configuration can be done anywhere with network access allowing the installer to locate in the zone for real time feedback. The software is simple, intuitive and targeted in scope to make set up easy and allow for granular control. There are 8 independent Dante™ inputs. The MC850 family is AES67 compatible. We built the MC850 family with the network in mind and you’ll find it shows.       
  • 8 independent Dante™ inputs
  • Primary and Secondary Dante™ ports (redundant or switched)
  • Ethernet port for control and reporting
  • RS-232 control
  • Power sharing up to 125W per channel
  • Compact 1RU enclosure
  • Made in USA
    Amplifiers
See the product
dynacord-powerh-5000_1200px|dynacord-powerh-5000_1200px
  • Dynacord

Dynacord – PowerH 5000

The power amp H5000 is part of Dynacord’s new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers.  The power amp H5000 is part of Dynacord’s new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers. The innovative 3-stage Grounded Bridge Class H Topology with “floating” switching power supply unit offers very high and stable output with extreme high efficiency on an extremely high performance level at minimum weight. PowerH amps are ideal for driving professional touring, high-end Concert-Sound and Pro-Sound applications. Next to classical protections, this new design employs the multi-stage ATP system (Advanced Thermal Protection) for the first time, which in most cases prevents the power amplifier from switching off when the temperature exceeds a critical level. The newly designed MCS system (Mains Current Supervision) prevents power amplifier breakdown caused by the activation of the automatic circuit breaker. For this, among other things, the MCS system uses the highly precise measurement of the RMS value ofthe actual mains current consumption. Information about the status of the power amplifier and its internal protections is provided on a LC-display. By utilizing the optionally available remote control module that is compatible with IRIS-Net™, this power amplifier additionally offers comprehensive remote monitoring and remote control functions plus a universal 2-channel digital audio controller (DSP) including highly precise FIR-filtering and digital speaker protection algorithms.    
    Amplifiers
See the product