Cart
← Back to Product Catalog

600.2D PowerZone Connect PRO

Amplifiers

More Details

Similar Products
  • Ecler NEEC Audio Barcelona

HALO-4B300

HALO-4B300 is a 4-channel Class D amplifier with networked DSP, delivering 4 × 300 W in low-impedance mode at 4 Ω or 8 Ω. Its four output channels can be bridged to drive high-impedance 70 V or 100 V loudspeaker lines. It features 4 balanced analogue inputs, 4 Dante®/AES67 digital inputs and outputs, 2 balanced auxiliary outputs, and a flexible 4 × 6 digital matrix. Its comprehensive DSP includes input and output parametric equalization, graphic output equalization, crossovers, delay, and configurable peak and RMS limiters. The built-in web application provides intuitive configuration, control and monitoring of the amplifier. Two Ethernet ports with integrated switch functionality allow network daisy-chaining and provide access to control, Dante®/AES67 audio transport and remote management. HALO-4B300 also supports customizable user control panels and integration with EclerCLOUD and the PULSO digital control panel series.
    Amplifiers
  • Dante Ch: 4x4
  • 32-bit
See the product
GTX-5K
  • Lynx Studio Technology

GTX-14K

The GTX Series are 4-channel, extremely high power level amplifiers designed to withstand the rough requirements of the touring market. With outstanding, high efficiency, these amplifiers have been equipped with a quality FIR-DSP with high performance 96kHz DSP processing and a large IPS display with a touch panel user interface. Advanced Audio Power Control Management has been implemented in the design of the GTX series. This enables the user to configure the division of power between the channels via the DSP enabling them to obtain maximum power through just one single channel if desired.
    Amplifiers
See the product
rdl-sf-np35e|rdl-sf-np35e
  • RDL

RDL – SF-NP35E

The SF-NP35E is an audio power amplifier that converts one Dante network audio channel to a 70 V or 100 V constant voltage amplified output.  The SF-NP35E is an audio power amplifier that converts one Dante network audio channel to a 70 V or 100 V constant voltage amplified output. The output provides 35 watts for a network digital audio level of 0 dBFS. Special software is not required to configure the module. The SF-NP35E is equipped to operate from a PoE++ enabled network switch. The SF-NP35E may be powered from an external 24 Vdc power supply, available separately. If a PoE++ powered device instantaneously demands excessive power from a PoE++ port, that port can shut off its output voltage, causing a prolonged disruption of the device operation. The SF-NP35E monitors the amplifier power and limits the current to protect the PoE++ port against shutting down even during extreme feedback or square wave modulation conditions. A red rear-panel PORT PROTECT LED flashes when the SF-NP35E reduces power consumption to prevent shutdown of the PoE++ port voltage. The SF-NP35E is equipped with an internal VCA for setting the output level. A detachable terminal block provides for the connection of an external 10 KΩ potentiometer or a 0 to 10 Vdc control voltage. The amplifier gain remains at maximum when the VCA input terminal is not connected. RDL remote controls are available to provide single-turn, multi-turn (rotary encoder) or pushbutton (ramp or fixed level selection) user level control. VCA control insures long term noise-free level adjustment. The module is equipped with both thermal and output short-circuit protection. The high-efficiency Class D output stage produces minimal heat for all levels of expected voice or music modulation. An LED MUTE indicator glows yellow when the output is muted. Valid synchronization to the Dante network is indicated by a green LED visible from the front of the unit. The SF-NP35E is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems. Features
  • 35 Watts RMS Constant Voltage Amplifier
  • 70 V or 100 V Output
  • Converts One Dante Network Audio Signal to a Mono Constant Voltage Output
  • Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
  • 0 dBFS Input for 35 W Output
  • Automatically limits supply current to protect against PoE++ port shutdown
  • VCA Control on Detachable Terminal Block
  • External Control Using 10 KΩ Potentiometer or 0 to 10 Vdc
  • Compatible with RDL Remote Level Controls
  • Special Software Not Required for Module Setup
  • LED Indicator for Network Sync
  • High-Efficiency Class D Operation
  • Thermal and Short-Circuit Protection
  • Plenum Rated per UL 2043 Standard
    Amplifiers
See the product