Dante-enabled Product Catalog

Asystems' DT44 is an 4x4 Dante interface card. Asystems offers four audio networking options for network-enabled devices including the DMP, DMA and NT series. These Asystems products, combined with any of these Networking solutions, provides flexible, large-scale operation in all modern commercial installations. Dante Networking cards are available as standard on "D" models of the DMP, DMA and NT series.

https://www.asystems-sys.com/index.php/products/audio-switcher/network-matrix-accessories/dt88

Asystems' DT88 is an 8x8 Dante interface card. Asystems offers four audio networking options for network-enabled devices including the DMP, DMA and NT series. These Asystems products, combined with any of these Networking solutions, provides flexible, large-scale operation in all modern commercial installations. Dante Networking cards are available as standard on "D" models of the DMP, DMA and NT series. More info: https://www.asystems-sys.com/index.php/products/audio-switcher/network-matrix-accessories/dt88

E-Vocal DUO is a dual channel analog input or dual channel analog output Dante converter. It consists of three models:

• E-Vocal ARS-0002-A00
• E-Vocal ARS-0002-A01
• E-Vocal ARS-0200-A00

E-Vocal ARS-0200-A00 connects your legacy audio gear to the Dante ® world. It allows two channels of audio analog input to be integrated into a Dante ® network. It's AES67 compliant and provides high resolution 24 bit analog to digital conversion. It can be powered by PoE or 5VDC via Micro USB connector. More info: https://www.aristaproav.com/product/duo/

E-Vocal DUO is a dual channel analog input or dual channel analog output Dante converter. It consists of three models:

• E-Vocal ARS-0002-A00
• E-Vocal ARS-0002-A01
• E-Vocal ARS-0200-A00

E-Vocal ARS-0002-A00 converts a Dante ® stream into two channels of analog audio output signals. It's AES67 compliant and provides high resolution 24 bit analog to digital conversion. It can be powered by PoE or 5VDC via Micro USB connector. More info: https://www.aristaproav.com/product/duo/

E-Vocal DUO+ is a dual channel analog input and dual channels analog output Dante converter.

The product consists of four models:

• E-Vocal ARS-0202-A00
• E-Vocal ARS-0202-B00
• E-Vocal ARS-0202-A11
• E-Vocal ARS-0202-B11

E-Vocal ARS-0202-A00 connects your legacy audio gear to the Dante ® world. It allows two channels of audio analog inputs to be integrated into a Dante ® network and converts a Dante ® stream into two channels of analog audio output signals. It has an RJ45 copper network interface and can be powered by PoE or 12VDC. Dante DUO+ has a rubber protection shell and rack mount brackets as optional items. More info: https://www.aristaproav.com/product/duo-plus/

E-Vocal DUO+ is a dual channel analog input and dual channels analog output Dante converter.

The product consists of four models:

• E-Vocal ARS-0202-A00
• E-Vocal ARS-0202-B00
• E-Vocal ARS-0202-A11
• E-Vocal ARS-0202-B11

E-Vocal ARS-0202-B00 connects your legacy audio gear to the Dante ® world. It allows two channels of audio analog inputs to be integrated into a Dante ® network and converts a Dante ® stream into two channels of analog audio output signals. It has an SFP connector for a Fiber interface if you choose to extend the connection distance. It is powered by 12VDC. Dante DUO+ has a rubber protection shell and rack mount brackets as optional items. More info: https://www.aristaproav.com/product/duo-plus/

E-Vocal DUO+ is a dual channel analog input and dual channels analog output Dante converter.

The product consists of four models:

• E-Vocal ARS-0202-A00
• E-Vocal ARS-0202-B00
• E-Vocal ARS-0202-A11
• E-Vocal ARS-0202-B11

E-Vocal ARS-0202-A11 connects your legacy audio gear to the Dante ® world. It allows two channels of audio analog inputs to be integrated into a Dante ® network and converts a Dante ® stream into two channels of analog audio output signals. It has two XLR microphone inputs with an adjustable gain control preamplifier for studio quality fidelity and low noise performance dynamic or condenser microphones. Two audio signal outputs allow Lip-Sync delay of up to 170 ms/ch (fs = 48 kHz) to synchronize the audio stream to the video stream. It has a built-in web-based controller for microphone gain control and Lip-Sync delay control. It has an RJ45 copper network interface and can be powered by PoE or 12VDC. Dante DUO+ has a rubber protection shell and rack mount brackets as optional items. More info: https://www.aristaproav.com/product/duo-plus/

E-Vocal MYRIAD are multiple channel analog input and analog output Dante converters. There are two models that make up the E-Vocal MYRIAD product:

• E-Vocal ARS-1616
• E-Vocal ARS-3232

These models are 1U rack mount analogue converters designed to transfer 16 or 32 analogue audio channels over a Dante network in both directions. Space-saving 25-pin D-sub connectors are provided for use with optional breakout boxes to input and output balanced line-level analogue audio signals. Two etherCON connectors (Dante Primary/Secondary) are available for redundant operation using two separate networks. For high availability operation requirements, dual AC input and dual PoE power sources are available for redundant operation. The units feature indicators for operation status and current sample rate as well as overload LEDs for each input and signal LEDs for each input and output. Any other settings, such as sampling frequency, channel routing or latency, can be made by the free “Dante Controller” computer application. The sampling frequency, power source status, will be displayed on the 2×20 character display located on front bezel. More info: https://www.aristaproav.com/product/myriad/

E-Vocal MYRIAD are multiple channel analog input and analog output Dante converters. There are two models that make up the E-Vocal MYRIAD product:

• ARS-1616
• ARS-3232

These models are 1U rack mount analogue converters designed to transfer 16 or 32 analogue audio channels over a Dante network in both directions. Space-saving 25-pin D-sub connectors are provided for use with optional breakout boxes to input and output balanced line-level analogue audio signals. Two etherCON connectors (Dante Primary/Secondary) are available for redundant operation using two separate networks. For high availability operation requirements, dual AC input and dual PoE power sources are available for redundant operation. The units feature indicators for operation status and current sample rate as well as overload LEDs for each input and signal LEDs for each input and output. Any other settings, such as sampling frequency, channel routing or latency, can be made by the free “Dante Controller” computer application. The sampling frequency, power source status, will be displayed on the 2×20 character display located on front bezel. More info: https://www.aristaproav.com/product/myriad/

E-Vocal DUO+ is a dual channel analog input and dual channels analog output Dante converter.

The product consists of four models:

• E-Vocal ARS-0202-A00
• E-Vocal ARS-0202-B00
• E-Vocal ARS-0202-A11
• E-Vocal ARS-0202-B11

E-Vocal ARS-0202-B11 connects your legacy audio gear to the Dante ® world. It allows two channels of audio analog inputs to be integrated into a Dante ® network and converts a Dante ® stream into two channels of analog audio output signals. It has two XLR microphone inputs with an adjustable gain control preamplifier for studio quality fidelity and low noise performance dynamic or condenser microphones. Two audio signal outputs allow Lip-Sync delay of up to 170 ms/ch (fs = 48 kHz) to synchronize the audio stream to the video stream. It has a built-in web-based controller for microphone gain control and Lip-Sync delay control. It has an SFP connector for a Fiber interface if you choose to extend the connection distance and can be powered by 12VDC. Dante DUO+ has a rubber protection shell and rack mount brackets as optional items. More info: https://www.aristaproav.com/product/duo-plus/

E-Vocal DUO is a dual channel analog input or dual channel analog output Dante converter. It consists of three models:

• E-Vocal ARS-0002-A00
• E-Vocal ARS-0002-A01
• E-Vocal ARS-0200-A00

E-Vocal ARS-0002-A01 converts a Dante ® stream into two channels of analog audio output signals. The two audio signal outputs of ARS-0002-A01 allows Lip-Sync delay of up to 170 ms/ch (fs = 48 kHz) to synchronize the audio stream to the video stream. The delay control switch on the E-Vocal ARS-0002-A01 can add delay in the range of 0~170ms by 32 increments. It can be powered by PoE or 5VDC via Micro USB connector. More info: https://www.aristaproav.com/product/duo/

Elytone's POE-S2MB/SB an in-ceiling speaker system with Dante Ultimo embeded; The POE-S2MB/SB utilizes PoE (802.3bt) to generate maxmium 60 watt (peak) output. 

Elytone's EAN-DA8X8 is a Dante-embedded preamp.

The POE DANTE/AES67 Audio Amplifier Modules MNS-AMPMC30XXA-2P, Built-in to your 4-8 ohm speaker, that instantly Dante-enables your speakers.
Dante Audio Amplifier module that drives small 4-8Ω speakers.
The MONISMS Dante Amplifier Modules Power 30W, 4-8Ω load.
The module's audio input is via an Ethernet audio network.
MNS-AMPMC30XXA-2P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE+ used, It can used the external 19VDC power supply.

[Model:MNS-AMPMC3011A-2P] 1 Channel, 30W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMPMC3012A-2P] 1 Channel, 2*15W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMPMC3022A-2P] 2 Channels, 2*15W Output, [2 Pairs Speaker Terminals].

The POE DANTE/AES67 Audio Amplifier Modules MNS-AMPMC30XXA-1P, Built-in to your 4-8 ohm speaker, that instantly Dante-enables your speakers.
Dante Audio Amplifier module that drives small 4-8Ω speakers.
The MONISMS Dante Amplifier Modules Power 30W, 4-8Ω load.
The module's audio input is via an Ethernet audio network.
MNS-AMPMC30XXA-1P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE+ used, It can used the external 19VDC power supply.

[Model:MNS-AMPMC3011A-1P] 1 Channel, 30W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMPMC3012A-1P] 1 Channel, 2*15W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMPMC3022A-1P] 2 Channels, 2*15W Output, [2 Pairs Speaker Terminals].

ZyPer4K AV decoder with an integrated Dante transmitter: Equipped with Dante technology, the ZeeVee ZyPer4K decoder will enable users to route any audio source within a ZyPer4K deployment to a Dante network. ZyPer4K AV decoder with an integrated Dante transmitter: Equipped with Dante technology, the ZeeVee ZyPer4K decoder will enable users to route any audio source within a ZyPer4K deployment to a Dante network. Dante audio over IP includes support for features such as “human” readable names for all connected devices, automatic device discovery, one-click routing and low deterministic latency. In addition, it provides stable performance and enables automatic reconnection of system components after power cycles. Like all Dante devices, the Dante transmitter found in the ZyPer4K decoder is managed by the Dante Controller application. This virtual patch panel provides for the convenient connecting of devices, clocking, sampling control and the ability to manually choose between unicast and multicast signal distribution. Audio from any ZyPer4K encoder can be routed directly to a ZyPer4K decoder and inserted onto the Dante network via the embedded Dante transmitter.

The MA-4.100 DAN is a compact digital amplifier with integrated 4 × 4 matrix was developed for media applications and small-scale sound reinforcement. The MA-4.100 DAN is a compact digital amplifier with integrated 4 × 4 matrix was developed for media applications and small-scale sound reinforcement. The MA-4.100 is equipped with a Dante UltimoX4 audio input. Despite being very small, the new amplifier features the latest generation of Fohhn DSPs – integrated into both inputs and outputs. The MA-4.100 is perfectly suited for smaller audio applications:

• Conference rooms and -systems
• Small lecture theatres and class rooms
• Hotels and restaurants
• Integration into media boards
• Media sound for displays and videowalls
• Shops and retail
• Fitness centres
• Low-ohm public address systems
• Amusement parks
• Museums and exhibitions
• Delay- and near field amplification within larger systems
• Small churches and community halls

The MONISMS Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers [Ceiling Speaker, In-wall Speaker, Pendant Speaker Column Speaker etc.] The MONISMS Dante Amplifier Power 60W, 4-8Ω load, This makes the module ideal for powering small areas consisting of only a few low power speakers.
The module's audio input is via an Ethernet audio network, allowing the use of the DANTE/ AES67 audio network protocol.

MNS-AMP60XXA-2A MAX power 60W,  Which build-in AC 100-240V [50/60Hz] power module.
Dante Audio Amplifier  can be mounted on a DIN rail or screwed onto a panel or wall for easy installation in a remote closet near the speaker area.

[Model:MNS-AMP6011A-2A] 1 Channel, 60W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMP6012A-2A] 1 Channel, 2*30W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMP6022A-2A] 2 Channels, 2*30W Output, [2 Pairs Speaker Terminals].

The MONISMS Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers [Ceiling Speaker, In-wall Speaker, Pendant Speaker Column Speaker etc.] The MONISMS Dante Amplifier Power 30W, 4-8Ω load, This makes the module ideal for powering small areas consisting of only a few low power speakers.
The module's audio input is via an Ethernet audio network, allowing the use of the DANTE/ AES67 audio network protocol.

MNS-AMP30XXA-2P is powered by standard POE+ and has a MAX power of 30 watts. If there is not  POE+  used,  It can used the external 19VDC power supply.
Dante Audio Amplifier  can be mounted on a DIN rail or screwed onto a panel or wall for easy installation in a remote closet near the speaker area.

[Model:MNS-AMP3011A-2P] 1 Channel, 30W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMP3012A-2P] 1 Channel, 2*15W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMP3022A-2P] 2 Channels, 2*15W Output, [2 Pairs Speaker Terminals].

The MONISMS MNS-8AXXWS-1P [MONISMS Model:MNS-8A11WS-1P / MNS-8A12WS-1P / MNS-8A22WS-1P] is a digital steerable active wall-mounted wooden speakers with DANTE®-Input.
Thanks to its very small and unobtrusive enclosure the MONISMS-Speaker is a fit for most architecturally sensitive environment including mu­seums, churches, conference-rooms and many more challenging spaces and environments.

MNS-8AXXWS-1P is powered by standard POE+ and has a MAX power of 30 watts. If there is not  POE+  used,  It can used the external 19VDC power supply.

[Model:MNS-8A11WS-1P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-8A12WS-1P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-8A22WS-1P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.

The speaker is Power supply via POE+ (Power over Ethernet) power supply, available at option. The speaker includes a Class-D audio power amplifier which provides effective use of power.
This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations.
The audio network system is also compatible with AES67 which makes this speaker system to be flexible with other audio network systems.

The system comes with 6.25” coaxial 60W loudspeaker driver, MNS-6AXXCPS-1P [MONISMS Model:MNS-6A11CPS-1P / MNS-6A12CPS-1P / MNS-6A22CPS-1P] that has excellent dispersion, wide bandwidth and smooth frequency response which makes this the top choice for today’s overhead commercial applications.
This assembly can be used in wide range of projects for paging and background music applications.
MNS-6AXXCPS-1P is powered by standard POE+ and has a MAX power of 30 watts.

[Model:MNS-6A11CPS-1P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-6A12CPS-1P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-6A22CPS-1P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.

The speaker is Power supply via POE+ (Power over Ethernet) . The speaker includes a Class-D audio power amplifier which provides effective use of power.
The audio network system is also compatible with AES67 which makes this speaker system to be flexible with other audio network systems.

The system comes with 4” 30W loudspeaker driver, MNS-4AXXOWS-1P that has excellent dispersion, wide bandwidth and smooth frequency response which makes this the top choice for today’s overhead commercial applications.
This assembly can be used in wide range of projects for paging and background music applications.
MNS-4AXXOWS-1P  is powered by standard POE+ and has a MAX power of 30 watts.

[Model:MNS-4A11OWS-1P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-4A12OWS-1P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-4A22OWS-1P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.

This is the perfect design of all-weather outdoor speakers; the perfect combination of elegance, sound, and durability. This whole aluminum, weatherproof designed withstands the hottest summer days and the coldest winter nights without any performance issues.
Designed for indoor and outdoor  surroundings, such as flowerbeds, around the yard , commercial streets, hotel corridors or blanketing outdoor spaces etc. offering omnidirectional full-range audio. MONISMS is the BEST choice for your outdoor audio solution.
The speaker is power supplied via POE+ (Power over Ethernet) or DC19V power supply, available at option. The speaker includes a Class-D audio power amplifier which provides effective use of power.
The audio network system is also compatible with AES67 which makes this speaker system to be flexible with other audio network systems.

The system comes with a 3.25” 30W loudspeaker driver, MNS-3AXXOWS-1P has excellent dispersion, wide bandwidth and smooth frequency response which makes this the top choice for today’s overhead commercial applications.
This assembly can be used in wide range of projects for paging and background music applications.
MNS-3AXXOWS-1P is powered by standard POE+ and has a MAX power of 30 watts. If there is not  POE+ available, it can be powered through an external 19VDC power supply.

[Model:MNS-3A11OWS-1P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-3A12OWS-1P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-3A22OWS-1P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.

The MONISMS MNS-6A11iWS-1P is a POE Dante in-wall speaker suitable for conference roms, houses of worship, classrooms, etc.  The MONISMS MNS-6A11iWS-1P is a POE Dante in-wall speaker suitable for conference roms, houses of worship, classrooms, etc. 

• 1 Channel, Only Master DANTE Speaker
• Power Supply via PoE+ [IEEE 802.3at]
• Build-in Digital Audio Amplifier
• Frameless Flat Design, Magnetic Ultra-thin Grille
• Dante Domain Manager and AES67 Support
• CE and RoHS passed

The speaker's power is supplied via POE+ (Power over Ethernet) or DC19V power supply, available at option. The speaker includes a Class-D audio power amplifier which provides effective use of power.
The audio network system is also compatible with AES67 which makes this speaker system flexible and compatible with other audio network systems.

The system comes with 6.25” coaxial 60W loudspeaker driver, MNS-6AXXCS-1P [MONISMS Model:MNS-6A11CS-1P / MNS-6A12CS-1P / MNS-6A22CS-1P] has excellent dispersion, wide bandwidth and smooth frequency response which makes this the top choice for today’s overhead commercial applications.
This assembly can be used in wide range of projects for paging and background music applications.
MNS-6AXXCS-1P is powered by standard POE+ and has a MAX power of 30 watts. If there is not  POE+ source available,  it can be powered through an external 19VDC power supply.

[Model:MNS-6A11CS-1P] 1 Channel, Only Master DANTE Speaker.
[Model:MNS-6A12CS-1P] 1 Channel, Reserve Additional Passive Speaker Terminals.
[Model:MNS-6A22CS-1P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.

Elytone's EWD-EB01 Dante audio interface with Bluetooth/Wifi is a premium multi-IO wall plate. It features stereo Bluetooth wireless audio input connectivity along with a 3.5mm analog input. The audio input will be converted into 2 channels of signal for Dante network. Elytone's EWD-EB01 gives you wireless access to your favorite music services like Spotify and Deezer, plus Internet radio stations through TuneIn, and your stored music library. They connect to your home Wi-Fi network so you can play music directly from the Internet to the system itself—or hear anything you want from a phone or tablet with audio casting technology. The EWD-EB01 is designed to Works with Alexa for voice control. Enjoy hands-free voice access to your music using any Alexa-enabled device like the Amazon Echo Dot. MULTIROOM STREAMING - Connect multiple EWD-EB01 around your home and stream fully synchronized audio around your home wirelessly or play different audio in each room all from one Smartphone or Tablet The EWD-EB01 is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power, control and audio data) is provided by a single CAT-5e/6 cable. The EWD-EB01 unique mix of consumer style wired and wireless connectivity allows easy connection of a wide variety of user devices to Dante network with no concern about ground loops or other audio problems common with consumer devices. 

The AVN-DIO03 is Dante AoIP network-to-headphones convertor in the Sonifex DIO range of Dante input/output devices. It features a single stereo headphone output available on two connections for 1/4" and 3.5mm jacks and a volume control for headphones level. The D/A circuitry offers >120dB of dynamic range, audiophile quality. The AVN-DIO03 is Dante AoIP network-to-headphones convertor in the Sonifex DIO range of Dante input/output devices. It features a single stereo headphone output available on two connections for 1/4" and 3.5mm jacks and a volume control for headphones level. All Sonifex DIO interfaces provide a simple, convenient, and elegant plug and play method of connecting legacy analogue and digital audio equipment to the Dante AoIP audio network. The D/A circuitry offers 120dB of dynamic range - ten times better than similar competing products. All DIO products use Dante Controller for configuration and are powered by PoE (Power over Ethernet). They use rugged aluminium boxes with side slots for screw-mounting and contain superior audio circuitry for optimal audio performance. All feature rugged Neutrik EtherCon® connectors and Neutrik lockable audio connectors for ultra-reliable connectivity.