RTS - KP-4016PB Keypanel

RTS – KP-4016PB Keypanel

Product Information

The KP-4016PB is a 16-Position HD Color Display Keypanel with pushbutton that delivers superior high-quality digital audio using the Bosch-branded OMNEO technology with Dante by Audinate audio over IP via either copper or fiber. The KP-4016PB delivers top-notch audio, free of noise, delay, and other artifacts present in older technology. This family of keypanels includes a rich set of connectors as standard, including GPIO and RC. As with other RTS products, emphasis has been placed on backward compatibility with previous generations of matrices including analog technology.

The KP-4016PB keypanel utilizes the latest generation of wide angle TFT displays providing superior clarity, resolution, and longer display life, delivering high-quality readability under a variety of lighting conditions.

Specifications

Dante Ch: 128x128
AES67 Enabled

DELEC – oratis compact CS 1624 DANTE

The oratis compact CS1624 DANTE is a very compact 19-inch/1RU high-performance intercom unit and summing audio matrix. It provides 16 AES/EBU subscriber ports, 24 analog line I/O’s and a redundant 64 channel interface to the Dante audio network.

Intercoms

See the product

Biamp

Biamp – NPX H1040

The NPX H1040 is a 4-button convenience paging station with handheld microphone for use in Qt X and Tesira systems. The H1040 features embedded DSP and on-board memory to support standard and advanced public address functionalities. Digital audio and control data can be transmitted by either AVB or Dante. The NPX H1040 can store four user-configurable page codes and up to 10 prerecorded messages. Additionally, the H1040 supports both tabletop and wall mounting with a removable “foot” that allows the paging station to be mounted flat against any surface, and a K-slot is included for enhanced physical security via an optional Kensington® lock. The NPX H1040 meets convenience paging requirements for facilities of all sizes.

Intercoms

See the product

Glensound

Glensound – Beatrice P2

The Beatrice P2 is a phone handset for Dante® network intercom. The user of the handset on the P2 unit can listen to two audio feeds from the network and send two audio channels out onto the network. Depending upon how the Dante® network has been routed the incoming audio circuits and outgoing circuits can be different locations and the outgoing circuits can be routed to multiple locations. Audio to the handset from the two network sources is routed to the telephone's earpiece only when the handset is off the hook. when the handset is picked up (off hook), the handset's microphone is turned on and two switches allow the operate to route the handset's microphone to one or other (or both) of the outgoing network audio channels.

Intercoms

Dante Ch: 2x2
24-bit

See the product

RTS – KP-4016PB Keypanel

Product Information

Specifications

Similar Products

DELEC – oratis compact CS 1624 DANTE

Biamp – NPX H1040

Glensound – Beatrice P2

Stay connected to Dante

Support

Company

Dante Networking Alliance