Cart
← Back to Product Catalog

Sonifex – AVN-AO16

I/O Interfaces

More details

Similar Products

AudioScience - Iyo Dante
  • AudioScience

AudioScience – Iyo Dante 32.0LR

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 32.0MR provides 32 balanced analog audio inputs and 0 outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. With RJ-45/StudioHub + GPIO Connector close-up.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

    I/O Interfaces
  • Dante Ch: 32x32
  • 16-bit, 24-bit, 32-bit
See the product
ru-lb2p_400px|ru-lb2p_400px
  • RDL

RDL – RU-LB2P

The RU-LB2 is a high quality line-level bi-directional Dante network interface. The RU-LB2 converts two line-level audio sources to Dante network channels, and two Dante network audio channels to balanced line level. Input gain trimmers and LED audio level indicators are provided. Model RU-LB2P operates from PoE. The RU-LB2 is a high quality line-level bi-directional Dante network interface. The RU-LB2 converts two line-level audio sources to Dante network channels, and two Dante network audio signals to balanced line level. The line level inputs accept unbalanced or balanced signals. Line-level outputs are balanced. The front panel features signal LEDs that indicate audio presence for each of the received network signal channels and a gain trimmer with an associated Dual-LED VU meter for each audio input. Balanced +4 dBu audio levels correspond to a network digital audio level of -18 dBFS. The noise floor is better than 80 dB below operating level. The RU-LB2 is also available in a PoE version (RU-LB2P). If PoE power and an external 24 Vdc supply are both feeding an RU-LB2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.
    I/O Interfaces
See the product
A000201912061727371
  • Mansion

Mansion – DIC2E23A

Features

• Two Mic/Line Terminal Block Inputs on Rear Panel.

• Converts Mic or Line Audio Signals to 2 Channels Dante Network.

• Switchable Mic/Line/48V Phantom Power for Each Input.

• Terminal Block for Two Audio Outputs on Rear Panel

• Two Audio Signal Outputs from Dante Network.

• Converts 2 Channels Dante Signals to Two Line Terminal Block Outputs.

• Balanced or Unbalanced Signals for Inputs and Outputs.

• Adjustable Gain Control for Output Level on Rear Panel.

• LED indicators for Signal Level and Clip of Each Input Channel on Front Panel.

• Adjustable Gain from -20 dB to +20dB for Each Input Channel on Front Panel.

• LED indicators for Signal Level of Each Output Channel on Front Panel.

• Power over Ethernet (PoE) or 24VDC power supply

• LED Indicators Show the Status of Power and Network.

• High Resolution 24 Bit for DAC and ADC

• Provides High Quality of Preamplifier for Microphones.

• Dimension: 143mm x 45mm x 93mm (WHD)

    I/O Interfaces
See the product