Seikaku – AVS-900


More details

Similar Products

attero-tech-unD610-BT_600px|attero-tech-unD610-BT_600px
  • Attero Tech by Q-SYS

Attero Tech by Q-SYS – unD6IO-BT

The unD6IO-BT is the latest addition to Attero Tech's innovative Dante wall plates. The unD6IO-BT allows any Bluetooth smart phone, tablet, or PC to stream audio wirelessly onto a Dante network. Bluetooth pairing is simple and intuitive. The unD6IO-BT also sports a 3.5mm stero analog input, stero RCA analog inputs, a 3.5mm stereo analog output, and 2 balanced analog outputs on side mounted Phoenix connectors. The unD6IO-BT is the perfect BYOD interface to a Dante network.
    I/O Interfaces
  • Dante Ch: 2x4
  • 24-bit
  • Turtle AV

Dante Pro 2CH Analog Line Output Adapter

Dante Pro 2CH Analog Line Output Adapter with Gain Controls Dante to Analog. Plug in. Play Anywhere. Unlock the power of pristine digital audio with the Dante 2CH Line Output Adapter. Built on the cutting-edge Dante Ultimo 2x2 solution, this adapter converts crystal-clear Dante digital audio into two-channel balanced or unbalanced analog audio. With 3-level sensitivity adjustment for analog outputs, you can tailor your sound with ease. The Dante Pro Dual Line Output is in a rugged metal chassis and can be powered PoE or 12V DC using the phoenix connectors.
    I/O Interfaces
  • Dante Ch: 2x0
  • 16-bit, 24-bit
focusrite-rednet-A16R_1200px|focusrite-rednet-A16R_1200px
  • Focusrite

Focusrite – RedNet A16R

RedNet A16R expands Focusrite’s range of 1U Dante interfaces with network and power supply redundancy, providing 16 channels of analogue input and output with high quality A-D and D-A digital conversion at up to 119dB dynamic range, plus two channels of AES/EBU digital I/O, to and from the Dante network. RedNet A16R expands Focusrite’s range of 1U Dante interfaces with network and power supply redundancy, providing 16 channels of analogue input and output with high quality A-D and D-A digital conversion at up to 119dB dynamic range, plus two channels of AES/EBU digital I/O, to and from the Dante network. RedNet A16R provides conversion at standard rates – 44.1, 48, 88.2, 96, 176.4 and 192kHz at 24-bit resolution – with pull-up/down capability. Electronically-balanced analogue audio I/O is provided on DB25 connectors wired to AES59 specifications, and internal signals are balanced throughout. Inputs and outputs may be configured for either +18dBu or +24dBu = 0dBFS signal levels. Two additional channels of AES/EBU I/O with sample rate conversion are provided on XLR connectors. Sample rates and operating levels are selected remotely from software on the host computer. The clock source for the unit may be internal, or external via Word Clock or DARS (the latter via the XLR input). RedNet A16R also outputs Word Clock. RedNet A16R features power and network redundancy, with two separate universal (100–240V) PSUs including IEC connectors with retaining clips, plus dual network interfaces on locking etherCON connectors, which can be set remotely to Redundant or Switched (daisy-chain) mode.
  • 16 channels of high-quality line-level analogue I/O
  • 24-bit precision Focusrite conversion up to 192kHz
  • 119dB dynamic range, flat from 20Hz – 20kHz, +/-0.15dB
  • Internally balanced throughout
  • Dante-based remote-controlled audio-over-IP connectivity
  • Dual power supplies and network connections with full power and network redundancy including locking connectors for maximum reliability
  • Word Clock I/O and DARS for increased flexibility plus an additional two channels of AES/EBU I/O
  • Analogue I/O to AES59 standard on DB25 connectors
  • Comprehensive front-panel indicators
  • Software-based routing and control – no hardware patching required
    I/O Interfaces
  • Dante Ch: 18x18
  • 24-bit