Cart
← Back to Product Catalog

Dante Pro 2CH Analog Line Output Adapter

I/O Interfaces

Learn more

Similar Products

calrec-hydra2_800px|calrec-hydra2_800px
  • Calrec

Calrec – Hydra2

Hydra2 provides seamless, scalable audio networking of audio mixing consoles with routers and I/O interfaces, allowing for a large numbers of inputs and outputs to be shared and controlled irrespective of location.  Hydra2 provides seamless, scalable audio networking of audio mixing consoles with routers and I/O interfaces, allowing for a large numbers of inputs and outputs to be shared and controlled irrespective of location. Hydra2 does not compromise audio quality, performs with negligible latency and is founded on comprehensive, built-in fault detection and redundancy. Many of the world’s most successful broadcasters rely on Hydra2 infrastructure for live on-air application in both fixed and mobile installations every day. At the heart of Hydra2 is the 8192² Calrec router (4096² on Summa and Artemis Light). Networks become more advanced when multiple routers are connected together to add additional mixing consoles, or to increase the amount of I/O connections available. Routers, mixing consoles and I/O can all be easily connected to the network as and when needed. Hydra2 provides 1-to-n routing; input sources may be routed to any number of destinations in mixed formats, removing the need for external splits, distribution amplifiers and format convertors. Sources can be routed to multiple consoles, to multiple DSP inputs on each console and directly to output destinations all at the same time. I/O units connect to a Hydra2 router via a single Cat5e or fibre link and can carry 512 channels of 24 bit 48KHz audio in each direction simultaneously, along with control and error detection data. Bandwidth between routers can be increased in multiples of 512 channels by adding additional Hydra2 links between them. As with all Calrec products, audio quality and product reliability are our top concerns. All analogue pre-amps and line level paths are designed around our well proven and highly respected circuitry, providing very high headroom with a very low noise floor. Our lossless proprietary network transportation protocol does not compromise the high audio quality and maintains minimal latency.
    I/O Interfaces
See the product
monacor-dadc-144dt
  • Monacor

Monacor – DADC-144DT

Monacor's DADC-144DT is a 4-channel Dante® transceiver. Monacor's DADC-144DT is a 4-channel Dante® transceiver.
  • 4 analogue XLR audio inputs
  • 4 analogue XLR audio outputs
  • 4-channel Dante® input/output (EtherCon/RJ45)
  • Analogue input and output levels can be adjusted individually via recessed potentiometers
  • 48 V phantom power can be activated as required for each analogue input
  • Mute function for each analogue output
  • Dante® sources and Dante® receiver can be combined via software
  • Encoding/decoding: 16/24/32 bits
  • Sampling rates: 44.1/48/88.2/96 kHz
  • Frequency range: 20-20,000 Hz
  • LED display for indicating signal, peak, network link, network act and power
  • Metal housing
  • 482 mm (19") rack installation, 1 RS
    I/O Interfaces
See the product
2017324145337
  • BARE

BARE – BR-102S

BR-102S network audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.

    I/O Interfaces
See the product