Lance Design – ADX-2400D


More details

Similar Products

glensound-vita-plus_1200px
  • Glensound

Glensound – VITA PLUS

The VITA PLUS is a very powerful Dante network audio interface, in a traditional desktop style. It has a mic/line input and headphone monitoring connection for a single user, and contains two 4 wire circuits. One of these is typically used as an on air channel, and the other as a talkback channel. The VITA PLUS is a very powerful Dante network audio interface, in a traditional desktop style. It has a mic/line input and headphone monitoring connection for a single user, and contains two 4 wire circuits. One of these is typically used as an on air channel, and the other as a talkback channel. The high quality microphone input, with the Glensound Referee compressor, makes the Vita Plus suitable for on air commentary use, perfect for a small OB or in an off-tube booth . The flexibility of the talk button configurations, means that the Vita Plus can also be used as a talkback unit as part of a Dante network. The Vita Plus can connect to any Dante network, or to other audio equipment via Glensound’s own Dante interface units. Features
  • Complete commentary functionality and 4W in a desktop format
  • Dante AoIP network  
  • Input is switchable from line, mic, or mic + 48v phantom power
  • Low noise, high headroom mic amplifier
  • 48K 24bit A/D converter
  • Headphone output on 6.35mm jack socket
  • Two outputs: one for main programme audio, one for talk back circuit, are both on the single RJ45/CAT5 network audio connection
  • Independently configurable buttons for both outputs using Config+: latching, momentary or lazy
  • Two inputs for headphone monitoring from network audio connection, both with adjustable level
  • Headphone inputs have left/both/right switching
  • Glensound intelligent headphone amp provides correct output levels into low or high impedance headphones and can also correctly drive mono earpieces with mono jack plugs.
  • Powered via PoE, or internal switch mode PSU
    Commentary Systems
  • Dante Ch: 2x2
  • 24-bit
ctp-systems-DCU304_1200px
  • CTP Systems

CTP Systems – DCU304

The DCU304 is a Dante enabled Commentary / Announcer unit. It has four inputs, one programme output and three talkback outputs.  The DCU304 is a Dante enabled Commentary / Announcer unit. The unit has four inputs, each selectable to left/right/both ears, one programme microphone output plus three 'lazy' talkback outputs. On pressing a talkback key the programme microphone output will be silently muted and redirected to the selected talkback output(s). The microphone also has a local line level analogue output which also mutes when a talkback key is pressed. Network connection may be either a Neutrik ethercon or a standard RJ45 connector. A LED indicates network status. Microphone gain is adjustable in 1dB steps from +70dB to +15dB and +5dB via the OLED display and lockable push buttons. 48 volt phantom power may also be selected. The DCU304 may be powered PoE or via an external 12 volt power source. The DCU304 can also be used as a cost effective Dante four wire box or as a top quality analogue or Dante mic amp.
    Commentary Systems
  • Dante Ch: 4x4
m214a_fa_1000
  • Studio Technologies

Studio Technologies – Model 214A Announcer’s Console

The Model 214A Announcer's Console is designed to serve as the audio control center for announcers, commentators, and production personnel. This tabletop unit supports applications utilizing the Dante® audio-over-Ethernet media networking technology. Two pushbutton switches allow the user to control the main and talkback audio output channels. Ease of use, configuration flexibility, and sonic excellence are some of the unit's highlights.
    Commentary Systems
  • Dante Ch: 4x3
  • 24-bit