Lance Design - ADX-140

Lance Design – ADX-140

Product Information

The ADX-140 XLR Interface panel provides four mic/line inputs, two wet/dry IFB outputs, and two RTS-format PL channels in a network-connected 1RU unit. Applications include broadcast announce booths, interview positions, locker rooms, etc.

Glensound – Minferno/3

MinFerno is a new, smaller, and even easier to use version of our exceptionally popular Inferno network audio commentary box.

MinFerno is designed for a single commentator/ announcer to use, and like its big brother the Inferno, it provides the very best possible commentary microphone amplifier and compressor limiter circuit for amazing on air sound.

The MinFerno is easy to use for commentators who would rather be talking about the game than figuring out how the equipment works. It is built to our exacting, rugged & robust standard to make it a reliable piece of broadcast equipment for the busy engineer.

Commentary Systems

Dante Ch: 4 Out
24-bit

See the product

CTP Systems

CTP Systems – B-DF4

The B-DF4 is a network four channel four wire unit in a compact aluminium beltpack enclosure.
With four audio inputs and four audio outputs it will meet the most demanding beltpack requirements. The B-DF4 has a built in speaker so may be used as a handy four wire box.
B-DF4 front
The talk buttons can be programmed to operate push to talk, latching or 'smart' (tap to latch, push to talk). When selected to talk the buttons illuminate red.
Listen input(s) may be enabled/disabled in conjunction with the listen select switch. Buttons may be set to flash on incoming audio.
Programming the B-DF4 is simple using the OLED display which also shows line input and output levels during normal operation.Power may be supplied Power over ethernet (PoE) or a 9-16 volt external DC supply.

Commentary Systems

Dante Ch: 4x4

See the product

CTP Systems

CTP Systems – DCD2020

The DCD2020 is a Dante enabled Commentary box supporting 2+1 commentators. The DCD2020 is a Dante enabled Commentary box supporting 2+1 commentators. Network connection may be fibre or copper and it has full network redundancy. Mic gains and other adjustments my be made on the local lockable LCD screen or remotely via the DCD2020's web page. In addition to the commentary box functions there is a built in Dante breakout box with six analogue inputs and eight analogue outputs. With 240V mains, 12 volt and PoE powering and a built in ethernet switch the DCD2020 can truly be the hub of your commentary system.

Commentary Systems

AES67 Enabled

See the product

Lance Design – ADX-140

Product Information

Similar Products

Glensound – Minferno/3

CTP Systems – B-DF4

CTP Systems – DCD2020

Stay connected to Dante

Support

Company

Dante Networking Alliance