Cart
← Back to Product Catalog

GTM SDI

Commentary Systems

Learn more

Similar Products

SPARK_3_Angle_With_Lights_On_BAN
  • Glensound

Glensound – SPARK 3

The Spark 3 is the first of Glensound's next generation of commentary unit using Audinate's Broadway Dante chipset. It is a sub compact, single user unit, with 3 talkback circuits. It is fully integrated with GlenController, allowing comprehensive remote control and monitoring functions. With the increased demand for remote production and home working, the Spark fits the bill.

    Commentary Systems
  • Dante Ch: 8x8
  • AES67 Enabled
See the product
glensound-express-IP-MKII|glensound-express-IP-MKII
  • Glensound

Glensound – Express ip MKII

The Express ip MKII was designed to provide a quick and easy solution when it is necessary to provide interfacing for two commentators, with simple facilities, into a Dante/ AES67 audio network. This high quality commentary unit is ideal for those looking for cost effective solutions without paying for unwanted features. The Express ip MKII was designed to provide a quick and easy solution when it is necessary to provide interfacing for two commentators, with simple facilities, into a Dante/ AES67 audio network. This high quality commentary unit is ideal for those looking for cost effective solutions without paying for unwanted features.
  • Two commentary positions
  • Dante network audio interface
  • Four external monitor inputs
  • Sidetone (own voice) monitor circuit
  • Other commentator monitor circuit
  • Two common talkback circuits
  • Operation of talkback buttons configurable
  • Mic inputs with selectable 48v phantom power
    Commentary Systems
  • Dante Ch: 4x4
  • 24-bit
See the product
glensound-vita_1200px|glensound-vita_1200px
  • Glensound

Glensound – VITA

The VITA is often used as a remote link to the main commentary unit. It is favoured by pitch side interviewers, and is popular in combinations with wireless systems. Inputs The main input is switchable between mic, mic+48v phantom power, and line. The input has an adjustable gain control to meet a wide range of dynamic, condenser, and ribbon microphones. The input passes through a broadcast quality dsp controlled compressor/limiter circuit prior to the A/D converters to maximize headroom and designed to manage the peaks of excited commentary. The A/D converters are full broadcast spec low noise, 48K 24bit designed for on air use. Outputs/Talkback There are two output circuits. One is used as the main programme audio, the other as a talkback circuit. There are separate button controls for each of these using Config+. They can each can be independently configured for latching or momentary, with the programme button also having a 'cough' feature. All talkback I/O connections are via the RJ45/CAT5 Dante network audio connection. Monitoring There are two monitoring inputs each with independent level control. Each of these inputs can be switched from the left ear, right ear, or both ears to the stereo headphone amplifier. The headphone amplifier is our high performance intelligent circuit which automatically adjusts its output level for high or low impedance headphones and can also drive mono earpieces and headphones. There are 2 off 4 LED level meters both indicating -12 to +6 dB. One LED meter is located on the front panel to enable easy visualization of the audio levels if the VITA is being used as a table top device and the other meter is located on the top panel facing the operator when used by its beltclip. Power Via PoE on the network connection, or via an external DC power supply. The VITA is often used as a remote link to the main commentary unit. It is favoured by pitch side interviewers, and is popular in combinations with wireless systems.
    Commentary Systems
  • Dante Ch: 2x2
  • 24-bit
See the product