Cart
← Back to Product Catalog

RTS – ARNI G2

Intercoms

More details

Similar Products

545DR_For_Dante_Website
  • Studio Technologies

Studio Technologies – Model 545DR Intercom Interface

The Model 545DR is designed for applications that utilize 2-channel party-line (PL) intercom circuits. Dante audio-over-Ethernet media networking technology is used to transport the two send and two receive audio channels. Two Model 545DR units can interconnect by way of an Ethernet network. Alternately, a Model 545DR can interconnect with other devices such as matrix intercom systems, DSP processors, and audio consoles. Party-line power and termination can be supplied by the Model 545DR, allowing direct connection of user beltpacks such as the RTS® BP325. Housed in a lightweight tabletop enclosure with optional mounting kits. Power-over-Ethernet (PoE) powered.

Key Features

Dante audio-over-Ethernet technology

Integrated party-line intercom power source

Analog hybrids with auto null capability

Input and output level metering

Excellent audio quality

PoE and 12 Vdc powering

Standard connectors

Table-top, portable, or optional rack-mount use

    Intercoms
  • Dante Ch: 2x2
  • 24-bit
See the product
delec-dante-desk16-crop|delec-dante-desk16-crop
  • DELEC

DELEC – Desk 16 Dante

The DELEC Desk 16 Dante is a 16-key desktop subscriber panel equipped with a Dante interface so it can be connected directly to a Dante network without the need for an additional convertor. These units can be hooked up to any DELEC intercom unit equipped with a Dante interface, e.g. CS 1624. These new subscriber panel models allow operators to target specific addresses or – using DELEC NAMs – announcement speakers. All three models come with Dante Primary and Secondary ports for fully redundant operation. In a different scenario, these two ports can be used to daisy-chain several subscriber panels, reducing cabling requirements dramatically. As a result, these new subscriber panels are not only perfect for broadcast and theatre environments but also for any application which requires long cable runs.
    Intercoms
See the product
glensound-gs-fw012-ip_600px|glensound-gs-fw012-ip_600px
  • Glensound

Glensound – GS-FW012 ip

The GS-FW012 ip is the Dante network audio version of the GS-FW012 4W unit. The GS-FW012 ip is the Dante network audio version of the GS-FW012 4W unit.   There are still four inputs for the top panel loudspeaker or headphone monitoring, each with their own level controls and each being derived from the Dante network.  There are still four talkback outputs each being routed to the Dante network. Both the inputs and outputs are presented via a single rear panel Neutricon RJ45/CAT5 connection that is Dante/AES67 compliant. The four talkback outputs are identical.  Each has a 3 position lever key talk switch that is either off, locked on, or in a sprung push to talk mode.  The output of each circuit can be off unless the talkback button is pressed, looping the the associated Dante input input, or outputting the local cue input. The local cue input is presented on XLR and has it's own level pot for the speaker or headphone monitoring. A good quality microphone amplifier with adjustable gain followed by a compressor limiter is built into the unit making its talkback outputs to the Dante network crystal clear. Conversion of the audio signals to/ from the Dante network are by low noise, high bandwidth 48K 24bit converters providing superb performance.  
    Intercoms
See the product