Cart
← Back to Product Catalog

Renkus-Heinz – P Series

Amplifiers

More details

Similar Products

pema-4250-front|pema-4250-front|pema-4250-front|ne-4250-front
  • Ashly Audio

Ashly – pema4250d

Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box. The pema4250 is a 4-Channel @ 250 Watts per channel and ships with Ashly’s full Protea™ suite of DSP.

The pema4250d is also available in these models:

pema 4250.25d - pema Network Power Amp 4 x 250W @ 25V with 8x8 Protea DSP. Includes OPDante Card

pema 4250.70d - pema Network Power Amp 4 x 250W @ 70V with 8x8 Protea DSP. Includes OPDante Card

pema 4250.10d - pema Network Power Amp 4 x 250W @ 100V with 8x8 Protea DSP. Includes OPDante Card

    Amplifiers
  • Dante Ch: 8x8
  • 24-bit
See the product
ne_60175701_der7101nrr_dv80
  • Extron Electronics

Extron – NetPA U 2002 SB

The Extron NetPA U 2002 SB is an ENERGY STAR qualified, Dante-enabled audio power amplifier with flexible outputs that can drive 8 ohm, 4 ohm, 70 volt, or 100 volt loads in a half rack, convection cooled, plenum rated enclosure that includes rack mount hardware. The bridgeable outputs can deliver two 200 watt channels into low impedance systems or one 400 watt channel into low or high impedance systems. Onboard audio DSP includes a 6x6 mix matrix, filters, and dynamics. Four mic/line inputs and two line outputs can be utilized as Dante endpoints or as additional inputs to the onboard DSP. System monitoring via the Dante connection includes detailed amplifier status.

    Amplifiers
  • Dante Ch: 2x2
  • 24-bit
See the product
201982132038
  • BARE

BARE – WD60U

The network audio power amplifier integrates a four-way digital power amplifier module. Signal processing and power amplification are solved on one motherboard, which shortens the signal path and simplifies engineering wiring.

  • Built-in 4 x 600W / 8 Ω ( 800W / 4 Ω) digital power amplifier
  • Professional PC- side control software is easy to use, Ethernet TCP / IP online management, can manage every device in the system at the same time
  • ★ DANTE network audio technology, low latency without interference, without loss of smooth and full sound quality
  • Network dual backup, multiple devices can be connected hand in hand.
  • ★ Automatic or manual network IP configuration, can be named independently for easy identification in the network
  • Automatic protection memory function in case of power failure
Output Power
Output power 8 ohms: 4x600W
Output power 4 ohms: 4x800W
Bridge mode 8 ohms: 2x 1600W
Power amplifier
Maximum efficiency of 90%, two-channel digital power amplifier
Frequency Range
20Hz-20kHz
Signal to noise ratio
100dB / 95dB
Sensitivity
26dB / 1.4V / 32dB
Crosstalk
＞ 90dB
Damping coefficient
＞ 500
Voltage gain
40dB
Total harmonic distortion
＜ 0.1%
Voltage conversion frequency
＞ 70
Conversion time
<1.5
Features
Input: 2 DANTE signal inputs
Protect power
Single channel: short circuit, DC output, low impedance; equipment: ultra low / high voltage, temperature, overload
Operation mode
Stereo, mono, bridged
interface
Input: 2 x RJ45 Output: 4 x XLR (up to)
Unit delay
<1.5ms
sampling
48k
Dimensions (WxHxD) mm
485x90x320mm
Weight (kg)8kg
    Amplifiers
See the product