Ashly - pema4250d

Ashly – pema4250d

Product Information

Ashly’s Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box. The pema4250 is a 4-Channel @ 250 Watts per channel and ships with Ashly’s full Protea™ suite of DSP.

The pema4250d is also available in these models:

pema 4250.25d – pema Network Power Amp 4 x 250W @ 25V with 8×8 Protea DSP. Includes OPDante Card

pema 4250.70d – pema Network Power Amp 4 x 250W @ 70V with 8×8 Protea DSP. Includes OPDante Card

pema 4250.10d – pema Network Power Amp 4 x 250W @ 100V with 8×8 Protea DSP. Includes OPDante Card

Specifications

Dante Ch: 8x8
Bit Depth: 24-bit
Sample Rate: 48kHz, 96kHz
AES67 Enabled

XT-10K

The XT series is a new generation of amplifiers offering high voltage output for high headroom sound, with 64 bit double-precision 96kHz DSP processing, and an advanced power management to squeeze the last watts out of your speakers.

Amplifiers

See the product

Kevic

Kevic – NA2012

Frequency Response=20Hz-18kHz

■IN/OUT Port=3.25mm TS balanced & Dante Network,

Preset mode(4 MODE), Reverb on/off, Speaker Terminal

■Dante=Dante / 100MBit ■Power Consumption=35W

■Rated Output=100W(4Ω) x 2CH ■Dante / 100MBit, Latency: less than 3ms

■Rated Power=AC110-240V, 50/60Hz

■Dimensions(W x H x D)=200 x 55 x 200mm ■Weight=1kg

Amplifiers

See the product

Powersoft

Powersoft – T602

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor The T Series is a very flexible and cost effective amplifier platform loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops. The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.

Amplifiers

Dante Ch: 4x4
24-bit

See the product

Ashly – pema4250d

Product Information

Specifications

Similar Products

XT-10K

Kevic – NA2012

Powersoft – T602

Stay connected to Dante

Support

Company

Dante Networking Alliance