NST Audio – VMX88


More details

Similar Products

seikaku-MATRIX-A8-F|seikaku-MATRIX-A8-F
  • Seikaku

Seikaku – Matrix-A8

The application of Matrix System contains both hardware and software, using host Matrix A8 as the control center, the whole function of this system is as below:
  • The basic system offers a total of 12 IN x 12 OUT without the Dante option.
  • I/O expansion is possible with 16pcs devices linked together for a maximum of 192 x IN and 192 x OUT.
  • With remote paging MIC RPM-200, can control paging in different zones.
  • With remote volume control RVA-200 or RVC-1000, can control volume in different zones.
  • Use different data line for audio signal and control signal RIO-200, which can avoid their conflict and increase their reliability.
  •  Transfer audio signal based on AES/EBU transfer protocol, while transfer control signal based on RS-485 transfer protocol.
  • 8 analogue IN / 8 analogue OUT via local ports
  • 4 digital IN / 4 digital OUT via local ports to analog panel I/O
  • 8 digital IN / 8 digital OUT via DANTE optional card
You might also be interested in the Matrix DB. It has the same features as the A8 but with 12 digital IN / 12 digital OUT and no analogue IN or OUT.
    DSPs (Digital Signal Processors)
  • Dante Ch: 8x8
  • 24-bit
biamp-tesira-server-front|biamp-tesira-server-front
  • Biamp

Biamp – Tesira SERVER

The Tesira SERVER delivers highly scalable processing that can grow over time with the needs of the end customer — with up to eight DSP-2 cards in a single chassis, and two network cards for Dante, AVB or CobraNet® in any combination. The SERVER is built for maximum flexibility, enabling I/O devices to be located at end points. Any I/O device can harness available processing. An integral network card provides network connection for configuration setup and control of the Tesira network. The modular DSP features two new Biamp algorithms, SpeechSense™ and AmbientSense™, which enhance speech processing by more accurately distinguishing between human speech and noise. The DSP also provides extensive audio processing, including but not limited to: signal routing and mixing, equalization, filtering, dynamics, and delay as well as control, monitoring and diagnostic tools; all configured through the Tesira designer software.
    DSPs (Digital Signal Processors)
  • Dante Ch: 64x64
  • 32-bit
M--组合内容
  • Magnetic

Magnetic – M series

The M Series contains 4 models:

Magnetic - M-204+Dante
Magnetic - M-206+Dante
Magnetic - M-306+ Dante
Magnetic - M-408+ Dante

■ 4 signal inputs and 8 signal outputs(xlr,banlanced)
■ Wifi control via usb or tcp/ip lan (ethernet)
■ 48khz sampling rate
■ 24 bit floating dsp
■ Dynamic range:>110db
■ Maximun input level at +23dbu
■ Maximun output level at +23dbu
■ Operational frequency range 20hz to 20khz
■ Processing delay:1000ms(input)210ms(output)
■ latency:<0.2ms
■ 20x2 character blue ceystal lcd display
■ 30 pressrts memory on hardware unit
■ 8 band fully parametric(frequency,q and gain)equalizer on each output channel and input channel
■ 180 phase inverter and mute button on each output
■ Limiter available on each output channel
■ For added safety of the speakers
■ USB interface for pc control
■ RS-485 interface
■ limiter:-20db`+20db
■ app for los and android and ipad(new version)
■ all pass filter:adjustable frequency and q setting control

    DSPs (Digital Signal Processors)