Dante-enabled Product Catalog

The BRIDGE B3 is an intelligent gateway between AES/EBU digital audio and AES67/Dante™ synchronous audio-over-IP streams. In your infrastructure, the BRIDGE B3 is the ideal solution to connect any digital audio equipment with your Audio-over-IP studio. The BRIDGE B3 is an intelligent gateway between AES/EBU digital audio and AES67/Dante™ synchronous audio-over-IP streams. In your infrastructure, the BRIDGE B3 is the ideal solution to connect any digital audio equipment with your Audio-over-IP studio. Thanks to its redundancy, the BRIDGE B3 can also provide secure distribution of your critical AES/EBU streams on any Dante redundant network.

• Stainless steel 1U chassis power consumption <50 W
• Front panel control interface for rapid overview of current status
• Dual AC/DC power supply 4 configurable GPIOs Wordclock synchronisation 24-bit audio routing: 44.1 kHz to 96 kHz
• AES67/Dante interface: 64-in/64-out EtherCON connector AoIP stream redundancy Integrated 4-port switch
• AES/EBU interface: 16-in/16-out mono Wordclock synchronisation and SRC (sample rate conversion) on each input

The BRIDGE B2 is an intelligent gateway between MADI digital audio and AES67/Dante™ synchronous audio-over-IP streams. Forming the backbone of your infrastructure, the BRIDGE B2 is the ideal solution to distribute and interconnect your MADI and AES67/Dante mission-critical streams in the studio. The BRIDGE B2 is an intelligent gateway between MADI digital audio and AES67/Dante™ synchronous audio-over-IP streams. Forming the backbone of your infrastructure, the BRIDGE B2 is the ideal solution to distribute and interconnect your MADI and AES67/Dante mission-critical streams in the studio.

• Stainless steel 1U chassis power consumption <50 W
• Front panel control interface for rapid overview of current status
• Dual AC/DC power supply 4 configurable GPIOs Wordclock synchronisation 24-bit audio routing: 44.1 kHz to 96 kHz
• AES67/Dante interface: 64-in/64-out EtherCON connector AoIP stream redundancy Integrated 4-port switch
• MADI interface: 1 x optical 64-in/64-out connector 1 x BNC 64-in/64-out connector

The AUDIOWAY Bridge B1 is an intelligent gateway between MADI and AES/EBU digital audio streams and AES67/Dante™ synchronous audio-over-IP streams. The AUDIOWAY Bridge B1 is an intelligent gateway between MADI and AES/EBU digital audio streams and AES67/Dante™ synchronous audio-over-IP streams. Forming the backbone of your infrastructure, the AUDIOWAY Bridge B1 is the ideal solution to distribute and interconnect your audio streams both in the studio and externally. Thanks to the software supplied with the product, the BRIDGE B1 can be used to route as well as monitor all inputs/outputs in every format (MADI – AES/EBU – AES67/Dante™). As a complete single-box system  it not only bridges audio-over-IP (AoIP) streams and legacy signals, but also ensures clock synchronization between the two systems. AUDIOWAY Bridge B1 allows you to route and monitor low latency audio whatever the technology/protocol. It brings a seamless studio management with AVS-monitor, Dante™ Controller and multiple presets. It reduces the cost and complexity of AoIP integration into your studio infrastructure. The AUDIOWAY Bridge B1 features 64/64 Dante™/AES67 full-duplex I/O channels, and is equipped with both 64/64 MADI I/O and 16/16 AES/EBU I/O digital audio interfaces, as well as a low latency hardware routing matrix between all inputs and all outputs.. AUDIOWAY Bridge B1 is very simple to use thanks to its control application which provides complete configuration and monitoring of all the streams operated by the equipment.  

 

This ruggedized handy box lets you connect your legacy audio gear to the Dante™ world. It works both as a ramp-on device to convert an analog LINE signal into a Dante™ signal and as a ramp-off box to come out of the Dante™ network with an anlog signal. Both can happen siumultaneously! The NA2-IO-DLINE is an end-of-network device. It is a breakout box which allows two channels of audio to be integrated into a Dante™ network. Simultaneously, NA2-IO-DLINE converts a Dante™ stream into analog audio signals. Hence, it is possible to use this tiny box to feed analog audio signals into the Dante™ network while at the same time receiving a mix from another Dante™ source. NA2-IO-DLINE is designed for harsh stage conditions. It therefore features lockable chassis connectors for both the audio and network connections. For fixed installations, the rubber protection can be removed. With optional mounting brackets or a rack panel, the box can be mounted below tables, in floor boxes, or in equipment racks.

The TASCAM ML-16D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante network using external breakout devices that utilize Sub-D format connectors. The TASCAM ML-16D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante network using external breakout devices that utilize Sub-D format connectors. A poweful and flexible solution, the TASCAM ML-316D has 2 D-Sub intputs and 2 D-Sub outputs, whch can easiy be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into - or extracted from - the Dante audio stream.

The TASCAM ML-32D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante network using external breakout devices that utilize Sub-D format connectors. The TASCAM ML-32D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante network using external breakout devices that utilize Sub-D format connectors. A poweful and flexible solution, the TASCAM ML-32D has 4 D-Sub intputs and 4 D-Sub outputs, whch can easiy be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into - or extracted from - the Dante audio stream.

The APB-D216 R-D is an active 19″ rack, AudioPressBox Drive Unit, 2 LINE Inputs, 2-channel Dante Interface, 16 Line/MIC Outputs, 2 buffered Outputs for up to 6 AudioPressBox expanders. The APB-D216 R-D is an active 19″ rack, AudioPressBox Drive Unit, 2 LINE Inputs, 2-channel Dante Interface, 16 Line/MIC Outputs, 2 buffered Outputs for up to 6 AudioPressBox expanders. 2-channel active drive unit features 2 Analogue DANTE inputs with high-quality digital-to-analogue converter. You can switch between Line or Dante input, depending on your needs. It offers 16 Line/MIC Level Outputs on the front and one output for expanders on the rear. Front outputs are balanced and individually transformer isolated with selectable output level for each output. You can expand the number of outputs with AudioPressBox expanders with up to 48 additional Line/MIC outputs per channel. As is AudioPressBox standard, you can use our signal processing like high-pass filter and compressor with limiter to achieve the perfect audio signal for all connected journalists. APB-Dante products uses Power over Ethernet (PoE). Power can be provided through the Ethernet cable from a PoE-capable network switch, or from a separate PoE injector.

The APB-D116 R-D is an active 19″ rack, AudioPressBox Drive Unit, 1 LINE Input, 1-channel Dante Interface, 16 Line/MIC Outputs, 1 buffered Output for up to 3 AudioPressBox expanders The APB-D116 R-D is an active 19″ rack, AudioPressBox Drive Unit, 1 LINE Input, 1-channel Dante Interface, 16 Line/MIC Outputs, 1 buffered Output for up to 3 AudioPressBox expanders. 1-channel active drive unit features 1 Analogue and DANTE input with high-quality digital-to-analogue converter. You can switch between Line or Dante input, depending on your needs. It offers 16 Line/MIC Level Outputs on the front and one output for expanders on the rear. Front outputs are balanced and individually transformer isolated with selectable output level for each output. You can expand the number of outputs with AudioPressBox expanders with up to 24 additional Line/MIC outputs per channel. As is AudioPressBox standard, you can use our signal processing like high-pass filter and compressor with limiter to achieve the perfect audio signal for all connected journalists. APB-Dante products uses Power over Ethernet (PoE). Power can be provided through the Ethernet cable from a PoE-capable network switch, or from a separate PoE injector. PoE Power Consumption: < 2 Watt 

Dante network digital audio adapters for the conversion of 2 Dante signal into 2 analogue line level signals and vice versa.

Pinanson offers two models:

1. Dante box D-A: for the conversion from 2 channel Dante signal (1 RJ-45 connector) into 2 channel analogue line level signal (2 XLR-3-M connectors).
2. Dante box A-D: for the conversion from 2 channel analogue line level signal (2 XLR-3-F connectors) into 2 channel Dante signal (1 RJ-45 connector).

Characteristics:

• The adapter is available in a MF box Pinanson format that is a mobile aluminium box format.
• Dante signal: for 44.1/48/96 KHz. 24 bits and 100 Mbps.
• Analogue signals: +4 dBu line level. Balanced signals.
• Power: PoE Class 1 802.3 af POE PD

Bridge up to 64 audio channels between the Waves SoundGrid and Dante protocols. The WSG Bridge lets you add real-time processing capabilities to a Dante network by using a Waves SoundGrid server dedicated to plugin processing. Bridge up to 64 audio channels between the Waves SoundGrid and Dante protocols. The WSG Bridge lets you add real-time processing capabilities to a Dante network by using a Waves SoundGrid server dedicated to plugin processing. 'Speaking' both SoundGrid and Dante, the 1U rack-mountable WSG Bridge is the perfect way to bring Waves' powerful, award-winning plugins and sound into your Dante network. Easily route any of the channels from your Dante network to the SoundGrid network for processing, and back to wherever they need to arrive.

The ABX-5 can be used as an interface between Dante™ audio networking and the modular active FOHHN FOCUS VENUE loudspeaker system and as a Dante™ to AES/EBU Breakout module and FOHHN-NET Ethernet adapter. The ABX-5 can be used in two ways: 1. As an interface between Dante™ audio networking and the modular active FOHHN FOCUS VENUE loudspeaker system. In this situation, the ABX-5 does not need an additional external power supply. 2. As a Dante™ to AES/EBU Breakout module and FOHHN-NET Ethernet adapter. In both cases FOHHN-NET control signals will be transmitted via Ethernet. The ABX-5 is equipped with a Dante™ Brooklyn II module. It has a Dante™ Primary and Secondary port for redundant applications.

Digimedia DIO XLR Pro is a 2 channel Dante™ interface with digital AES-3 input and output. Input has SRC. There is Dante Domain Manager and AES67 support build in. Digimedia DIO XLR Pro is a 2 channel Dante™ interface with digital AES-3 input and output. Input has SRC. There is Dante Domain Manager and AES67 support build in.

Digimedia DAC XLR Pro is a 2 channel Dante™ interface with analog output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB. There is Dante Domain Manager and AES67 support build in. Digimedia DAC XLR Pro is a 2 channel Dante™ interface with analog output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB. There is Dante Domain Manager and AES67 support build in.

Digimedia HPA Rotary Pro is a 2 channel Dante™ interface with analog headphone output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB and a high class amplifier with up to S/N 120dB. There is Dante Domain Manager and AES67 support build in. Digimedia HPA Rotary Pro is a 2 channel Dante™ interface with analog headphone output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB and a high class amplifier with up to S/N 120dB. There is Dante Domain Manager and AES67 support build in.

Digimedia AMP Pro is a 2 channel Dante™ interface with analog amplifier output and PoE (Power over Ethernet) on board. There is Dante Domain Manager and AES67 support build in. Audio output power depends on PoE and can go up to 20W. Digimedia AMP Pro is a 2 channel Dante™ interface with analog amplifier output and PoE (Power over Ethernet) on board. There is Dante Domain Manager and AES67 support build in. Audio output power depends on PoE and can go up to 20W.

Digimedia HPA Pro is a 2 channel Dante™ interface with analog headphone output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB and a high class amplifier with up to S/N 120dB. There is Dante Domain Manager and AES67 support build in. Digimedia HPA Pro is a 2 channel Dante™ interface with analog headphone output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB and a high class amplifier with up to S/N 120dB. There is Dante Domain Manager and AES67 support build in.

Digimedia DIO RCA TOS Pro is a 2 channel Dante™ interface with digital SPDIF input and output. Input has SRC and is specially designed to connect CD and DVD players, satellite and digital radio tuners and DJ-consoles to Dante™ network. There is Dante Domain Manager and AES67 support build in. Digimedia DIO RCA TOS Pro is a 2 channel Dante™ interface with digital SPDIF input and output. Input has SRC and is specially designed to connect CD and DVD players, satellite and digital radio tuners and DJ-consoles to Dante™ network. There is Dante Domain Manager and AES67 support build in.

Digimedia DAC RCA Pro is a 2 channel Dante™ interface with analog output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB. There is Dante Domain Manager and AES67 support build in. Digimedia DAC RCA Pro is a 2 channel Dante™ interface with analog output.On board is a high quality DAC from TI/Burr Brown with typical S/N 114dB. There is Dante Domain Manager and AES67 support build in.

The NBB-04T Networked Audio Transmitter transmits 4 channels of analog audio converted from Dante networked audio stream which is distributed from other Dante-enabled devices. It comes with two RJ-45 Ethernet ports and can be powered by either PoE or 48V external power adapter. The NBB-04T Networked Audio Transmitter transmits 4 channels of analog audio converted from Dante networked audio stream which is distributed from other Dante-enabled devices. It comes with two RJ-45 Ethernet ports and can be powered by either PoE or 48V external power adapter.

• Dante-enabled networked Audio Transmitter
• Streaming audio in robust standard Ethernet cable (a.k.a., Digital Snake)
• Easily organize and expand network topology with Ethernet switches
• Uncompressed 24-bit PCM coding with sample rate up to 96KHz
• Two RJ-45 ports make Daisy-chain cascading feasible
• Powered by either PoE or 48V adapter
• Attenuate control for each channel
• Routing and other configuration are set with Dante Controller software

The NBB-04R Networked Audio Receiver receives 4 channels of analog audio and converts them into Dante networked audio stream which in turn can be received by other Dante-enabled devices. It comes with two RJ-45 Ethernet ports and phantom power support, and can be powered by either PoE or 48V external power adapter. The NBB-04R Networked Audio Receiver receives 4 channels of analog audio and converts them into Dante networked audio stream which in turn can be received by other Dante-enabled devices. It comes with two RJ-45 Ethernet ports and phantom power support, and can be powered by either PoE or 48V external power adapter.

• Dante-enabled networked Audio Receiver
• Streaming audio in robust standard Ethernet cable (a.k.a., Digital Snake)
• Easily organize and expand network topology with Ethernet switches
• Uncompressed 24-bit PCM coding with sample rate up to 96KHz
• Two RJ-45 ports make Daisy-chain cascading feasible
• Powered by either PoE or 48V adapter
• Gain or Attenuate control for each channel
• Phantom power engagement control per channel
• A signal clip indicator for all inputs
• XLR Combo sockets for both XLR and phone plugging
• Routing and other configuration are set with Dante Controller software

The AV-WALL-DT4i Dante Mic/Line Interface is a cost-effective wall box in an incredible small size of less than 45x45mm, designed to fit into a single-gang junction box (European format). It offers 2 XLR Mic inputs with 64dB gain and a line-in stereo mini Jack with 40dB gain. Gain can be controlled remotely (network) or locally (rotary button). The AV-WALL-DT4i Dante Mic/Line Interface is a cost-effective wall box in an incredible small size of less than 45x45mm. The AV-WALL-DT4i offers 64dB of true preamp gain on 2 professional XLR Mic inputs and 40dB of gain at line level on a stereo mini Jack connector. Gain can be controlled remotely via network or locally via direct rotary push button. Internal connector allows for link with optional Bluetooth extension Wall-Plate. The AV-WALL-DT4i is designed to fit into a single-gang junction box of only 45x45mm fitting small European format. AV-WALL-DT4i is PoE enabled and thus power, control and audio data connectivity is provided by a single CAT‐5e/6 cable. The size of the main box is 44.6 x 44.6 x 50 mm. It is compatible with “Mosaic” plate of Legrand®. The depth can be adjusted between 26 to 43 mm to fit near any wall depths. Wall plate size may vary depending of the region.

Specifically designed for Devialet’s revolutionary Phantom speaker and offering seamless integration, this Ethernet to Optical Adapter leverages the power of Dante-based networks, enabling professionals to build simple, robust and fully configurable custom installations for their customers. Specifically designed for Devialet’s revolutionary Phantom speaker and offering seamless integration, this Ethernet to Optical Adapter leverages the power of Dante-based networks, enabling professionals to build simple, robust and fully configurable custom installations for their customers.

The Extron AXI 02 AT is a compact audio interface that extracts two channels from a Dante® audio network. The Extron AXI 02 AT is a compact audio interface that extracts two channels from a Dante® audio network. This Dante Audio Interface provides two channels of audio output from the network to devices without Dante connectivity. It features two line level analog outputs on captive screw connectors with a mirrored two-channel S/PDIF output on a coaxial RCA connector. The AXI 02 AT interfaces with a Dante audio network over a standard local area network, and is powered through PoE. The AXI 02 AT includes a ZipClip® 100 Mounting Kit and is compatible with Extron Rack Shelves and ZipClip 200 mounting solutions.

Red 16Line is a 64x64 Pro Tools | HD™ and dual Thunderbolt™ 3 audio interface with ultra-low latency A-D/D-A conversion, Red Evolution mic preamps, up to 121dB dynamic range, ultra-low round trip latency, and expansion over Ethernet for networked audio. Red 16Line is a 64x64 Pro Tools | HD™ and dual Thunderbolt™ 3 audio interface with ultra-low latency A-D/D-A conversion, Red Evolution mic preamps, up to 121dB dynamic range, ultra-low round trip latency, and expansion over Ethernet for networked audio. Since Red 16Line provides both DigiLink™ connectors and Thunderbolt™ connections, it's now easier than ever to switch from Pro Tools | HD™ to a second DAW, without the need to reconfigure option cards in the interface. Simply change the host mode either in the remote control software, or on the device front panel and change DAWs in seconds. High-performance audio conversion with over 118dB dynamic range A-D and 121dB dynamic range D-A (A-weighted). These converters have been expertly selected and calibrated to provide the best balance of sound quality, dynamic range and conversion latency in our best-quality audio interface. Red’s ultra-low round trip latency completely transforms your workflow. If you’re used to having to build two different mixes – one using input monitoring to overdub, the other using the DAW for playback – the good news is that now, one is enough. Build your mix on the DAW and use it whether you’re overdubbing (monitoring the input you’re recording with the Focusrite Control software mixer) or playing back, with all your plug-ins in place, all the time. Red 16Line features 16 line inputs on D-sub, coupled with 16 line outputs and two main monitor outputs. The two digitally-controlled Red Evolution mic preamps provide up to 63dB of ultra-clean gain along with stereo linking, individual phantom power, high-pass filter, phase reverse and Air mode: the name we give to the sonic signature of the classic transformer ISA preamp.

EXBOX.MD is a Dante / MADI converter which is equipped with three MADI ports (optical SC, coaxial BNC, SFP) and four network ports. It offers straight-forward conversion of 64 audio channels between MADI and Dante. The handy size of the popular EXBOX series (1/3 of 19’’), combined with the rock-solid housing and redundant power supplies, makes the EXBOX.MD a perfect connectivity tool for touring live shows, OB vans as well as studio applications. Audio Streaming Up to 32 streams with a total number of 64 audio channels are supported FastSRC™ The FastSRC™ is a low latency sample rate converter, switchable for the Dante I/O, and ensures seamless exchange between MADI and Dante I/O when both sources are not synchronised. EARS™ Enhanced Automatic Redundancy Switching™ is a system to prevent interruption of the output signal. Rack-Ready Each EXBOX can be mounted into a standard 19’’-rack by using the optional kit BOXMOUNT.XL.

DIF440 is based on the international general agreement with 4 in 4 out audio interface of Dante and based on Dante Ultimo latest chip solutions, can realize the analog audio signal access, converted to digital audio signal by Dante protocol access to any Dante audio transmission network equipment, realize high quality, long distance, the transmission properties of low latency, and to ensure that the audio signal is the most real reduction.

• 4 analog input 4 analog output (balanced) for line / microphone level
• Support the microphone sensitivity adjustment
• 48V phantom power
• 115 dB(A) dynamic range
• 2 analog outputs
• Support for 96k and 48k signal transmission 12V power supply

The ARX NetSplit is a unique ‘Dante / Analog Splitter that is switchable into Dante mode or Analog mode. The ARX NetSplit is a unique ‘Dante / Analog Splitter that is switchable into either of two modes:

• In Dante mode it will extract 2 channels of digital audio from the network via aRJ45 Ethernet input, and split them to 2 channels of 1:4 splitter
• In Analog mode it can take 2 channels of Analog audio, and split them to 2 channels of 1:4 splitter

The NetSplit can receive audio channels from a Dante network and provide studio quality, low latency audio via balanced XLR output connectors to analog audio equipment. Thus any audio available on the network can be routed via the NetSplit to an amplifier, powered speaker(s), mixing console, digital signal processor and many other analog audio devices.