Product Information
Sommer cable’s SPY-EDAO-C1 is a single-channel Ethercon Dante®-Analog-OUT-Converter.
Sommer cable’s SPY-EDAO-C1 is a single-channel Ethercon Dante®-Analog-OUT-Converter.
Similar Products
- RDL
RDL – SF-UN1
The SF-UN1 is a digital audio interface that converts a USB stereo digital audio source to two Dante network audio channels.
The SF-UN1 is a digital audio interface that converts a USB stereo digital audio source to two Dante network audio channels. The SF-UN1 automatically detects a valid USB input. The input is decoded, re-clocked and transmitted to the Dante network. The module provides automatic sample rate conversion from the USB input to the Dante network. Special software is not required to configure the module. The SF-UN1 is a professional grade product for studio quality performance.
The SF-UN1 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The SF-UN1 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.
Features:
- Converts Left and Right USB Audio Channels to two Dante Network Channels
- Supports USB Input Sampling Rates of 32 kHz, 44.1 kHz and 48 kHz
- Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Digital Audio Sources Remain in the Digital Domain through the Dante Network Output
- Special Software Not Required for Module Setup
- LED Indicator for Valid Power and Network Sync
- Operation from PoE Power (Class 0, IEEE 802.3af)
- Equipped for SysFlex™ Rack Mounting or Surface Mounting
- I/O Interfaces
- RTS
RTS – OEI-2
The OEI-2 enables connectivity between analogue audio sources and legacy RTS key panels and an OMNEO network. This allows users to maintain existing infrastructure and the equity of their original equipment investment while updating to high-performance OMNEO media networking architecture.
- Provides an interface between legacy RTS key panels and RTS OMI OMNEO interface cards for ADAM and ADAM-M units.
- Support for both USOC or 586B wiring.
- Provides less than 20 ms of audio latency in typical network installations.
- Provides a frequency response of 20 Hz to 20 KHz to the keypanel.
- Supports DHCP and device discovery for easy set up and network management.
- Optional fibre connection – multi-mode or single-mode available.
- Supports CAT-5/5e and CAT-6 with dual Ethernet connectors for device looping.
- Supports compatibility with third-party Dante™
- I/O Interfaces
- AudioScience
AudioScience – Iyo 32.32M
The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 32.32M provides 32x32 balanced analog audio inputs and outputs.
The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format.
The 32.32M provides 32x32 balanced analog audio inputs and outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. Output levels are configurable up to +24dBu.
RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.
The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.
Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.
All units can also be operated in AES67 interoperability mode.
- I/O Interfaces