Cart
← Back to Product Catalog

SSL – HC Bridge

I/O Interfaces

More details

Similar Products

av-nl4
  • RDL

RDL – AV-NL4

The AV-NL4 is a line-level interface that converts four Dante network audio channels to four balanced audio outputs on XLR connectors. Each channel provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. Special software is not required to configure the module. The AV-NL4 is a professional grade product for studio quality fidelity and low noise performance.

The AV-NL4 may be powered from an external 24 Vdc power supply, available separately. The AV-NL4 is equipped to operate from a PoE enabled network switch. The AV-NL4 will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an AV-NL4, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. Valid power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.

The AV-NL4 is constructed in a durable, professional all-metal enclosure suitable for use on stage or in studio, or mounted to any flat surface. For fixed installations, mounting brackets are included. The chassis is designed to protect the front panel slide switches from accidental damage. This full-featured AV-PAK product is engineered and manufactured in the U.S.A for continuous duty in demanding installations.

    I/O Interfaces
See the product
ru-nfdp_400px
  • RDL

RDL – RU-NFDP

The RU-NFD is a high quality Dante network to Format-A interface/distributor compatible with RDL Format-A twisted pair audio products. The RU-NFD converts three Dante network audio channels to RDL Format-A. The unit also converts a fourth Dante audio channel to a balanced line-level AUX output. Model RU-NFDP operates from PoE. The RU-NFD is a high quality Dante network to Format-A interface/distributor compatible with RDL Format-A twisted pair audio products. The RU-NFD converts up to three Dante network audio channels to RDL Format-A. The unit also converts a fourth Dante audio channel to a balanced line-level AUX output. RDL’s Format-A system utilizes the 4 pairs of a standard CATx cable; 3 pairs (pairs A, B and C) are designated for sending and receiving audio and the fourth pair is used to distribute 24 Vdc to connected Format-A products. The RU-NFD provides signal presence metering and is equipped to power connected Format-A endpoints. The RU-NFD is also available in a PoE version (RU-NFDP). If PoE power and an external 24 Vdc supply are both feeding an RU-NFDP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 
    I/O Interfaces
See the product
digigram-AUDIOWAY-bridge-B3_1200px|digigram-AUDIOWAY-bridge-B3_1200px
  • Digigram

Digigram – AUDIOWAY Bridge B1

The AUDIOWAY Bridge B1 is an intelligent gateway between MADI and AES/EBU digital audio streams and AES67/Dante™ synchronous audio-over-IP streams. The AUDIOWAY Bridge B1 is an intelligent gateway between MADI and AES/EBU digital audio streams and AES67/Dante™ synchronous audio-over-IP streams. Forming the backbone of your infrastructure, the AUDIOWAY Bridge B1 is the ideal solution to distribute and interconnect your audio streams both in the studio and externally. Thanks to the software supplied with the product, the BRIDGE B1 can be used to route as well as monitor all inputs/outputs in every format (MADI – AES/EBU – AES67/Dante™). As a complete single-box system  it not only bridges audio-over-IP (AoIP) streams and legacy signals, but also ensures clock synchronization between the two systems. AUDIOWAY Bridge B1 allows you to route and monitor low latency audio whatever the technology/protocol. It brings a seamless studio management with AVS-monitor, Dante™ Controller and multiple presets. It reduces the cost and complexity of AoIP integration into your studio infrastructure. The AUDIOWAY Bridge B1 features 64/64 Dante™/AES67 full-duplex I/O channels, and is equipped with both 64/64 MADI I/O and 16/16 AES/EBU I/O digital audio interfaces, as well as a low latency hardware routing matrix between all inputs and all outputs.. AUDIOWAY Bridge B1 is very simple to use thanks to its control application which provides complete configuration and monitoring of all the streams operated by the equipment.  

 

    I/O Interfaces
See the product