Digigram – AUDIOWAY Bridge B1


More details

Similar Products

TASCAM_-_MM-4D-IN-X
  • TASCAM

TASCAM – MM-4D/IN-X

Built-in DSP 4 mic/line input Dante converter to respond to various needs of contractor market and professional audio scene. Built-in DSP 4 mic/line input Dante converter to respond to various needs of contractor market and professional audio scene. The MM-4D/IN-X is a compact converter that converts 4-channel mic/line input signals into Dante signals. With half the size of a standard 1U rack, the MM-4D/IN-X is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. MM-4D/IN-X supports up to 96kHz/24bit and uses XLR connectors for analog mic/line input.  
    I/O Interfaces
  • Dante Ch: 4x4
  • 16-bit, 24-bit
AudioScience - Iyo Dante
  • AudioScience

AudioScience – Iyo Dante 32.0LR

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 32.0MR provides 32 balanced analog audio inputs and 0 outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. With RJ-45/StudioHub + GPIO Connector close-up.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

    I/O Interfaces
  • Dante Ch: 32x32
  • 16-bit, 24-bit, 32-bit
neutrik-xirium-pro-nxp-tx-dante|neutrik-xirium-pro-nxp-tx-dante
  • Neutrik

Neutrik – NXP-TM-DANTE

This product has reached End of Line and is discontinued. The NXP-TM-DANTE module allows the XIRIUM PRO NXP2TX base to send the signal from a Dante network wirelessly to an RX base, providing the highest possible sound quality, reliability, and outstanding performance in one unique solution. With XIRIUM PRO Neutrik introduces a new, innovative product, allowing for easy adoption of DiWA technology. With just two devices, namely the transmitter (TX) and the receiver (RX), audio transmission can be established quickly, and more cost effectively then using traditional audio cables or other wireless systems. Engineers, artists, and project designers can now think beyond the physical limitations of the traditional audio cable. Equipment such as loudspeakers, amplifiers, and mixing consoles can now be positioned for optimal audio performance and what makes the most acoustic sense allowing artistry and sonic performance to take priority over venue logistics. XIRIUM PRO system offers a combination of 7 different input and output audio modules and 2 base stations, including this Dante transmitter module and a Dante receiver module. All the modules contain a rechargeable lithiumIon battery and can be operated either on battery power or on direct mains power.
    I/O Interfaces